首页 > 器件类别 > 传感器 > 光学传感器

EX-19A-PN

穿透光束 光学传感器 39.37"(1m) PNP - 开路集电极/亮光

产品类别:传感器    光学传感器   

制造商:Panasonic(松下)

官网地址:http://www.panasonic.co.jp/semicon/e-index.html

下载文档
EX-19A-PN概述
EX-10 系列放大器内置超薄光电传感器,采用灵活安装,适用于很多应用,如印刷电路板定位、检测 IC、检测印刷电路板机架、检测晶片盒、检测薄环或检查托盘中是否存在电容器。

省电
高速响应时间
背景抑制
EX 系列传感器是提供的最小和最窄传感器
尽管采用超微型设计,直通光束光电传感器的最大范围大约为 1000 mm
提供两种设计,具有前部或侧面应急指示灯具
EX-19A-PN规格参数
参数名称
属性值
类别
传感器;光学传感器
厂商名称
Panasonic(松下)
系列
EX-10
包装
感应方法
穿透光束
感应距离
39.37"(1m)
电压 - 供电
12V ~ 24V
响应时间
500µs
输出配置
PNP - 开路集电极/亮光
光源
红 LED
连接方法
缆线
侵入防护
IP67
电缆长度
78.74"(2m)
工作温度
-25°C ~ 55°C
基本产品编号
EX-19
EX-19A-PN文档预览
Amplifier Built-in
Ultra-slim Photoelectric Sensor
EX-10
SERIES Ver.2
Ver.2
2022.6
* The contents of this catalog are as of
October 2017.
For the latest information, please visit our company website.
2
Ultra-slim Photoelectric Sensor
EX-10
SERIES Ver.2
Ver.2
Amplifier Built-in
Recognition
(Excluding some models)
Certified
(Some models only)
PNP output
type available
Amplifier built-in extraordinarily small and slim size
Smallest body, just 3.5 mm
0.138 in
thick
It can be mounted in a very
small space as its size is just
W10 × H14.5 × D3.5 mm
W0.394 × H0.571 × D0.138 in
(thru-beam, front sensing type).
Flexible mounting
The diffuse reflective type sensor is front sensing and is
so thin that it gives an impression of being just pasted
on the mounting base. The thru-beam type is available
as front sensing type, as well as, side sensing type,
allowing flexible mounting.
Thru-beam
• Front sensing type
• Side sensing type
Diffuse reflective
• Front sensing type
A wide variety of narrow-beam type! Light diffusion is approx. 1/2 of standard type.
Less interference with no slit,
narrow-pitch can be set.
The pitch of installation is 1/2 of
conventional models, so that the
close-installation is possible. No cost
is necessary to purchase or install
a slit.
EX-11□
/
EX-11E□
ø0.5mm
EX-11S□
EX-11S□
/
EX-11SE□
EX-□S□
Possible to sense a minute object
less than ø0.5 mm
ø0.039 in
with
no slit.
The series is applicable to sense a
minute object without any cost.
Long sensing range of 1 m
3.281
ft
with narrow beam
A long 1 m
3.281 ft
sensing range is
possible with narrow beam.
EX-19S□
Ultra-slim Photoelectric Sensor
EX-10
SERIES Ver.2
3
APPLICATIONS
Positioning of PCBs
Detecting ICs
Detecting PCB rack
EX-19S
Transparent stick
IC
EX-14
EX-15
Detecting wafer cassette
Detecting thin ring
Checking for absence of capacitor in tray
EX-14
EX-13E
EX-14
Guide
BASIC PERFORMANCE
Electric power saving *
The
EX-10
series
achieves reductions
in power consumption
of up to 65 %. These
sensors contribute
to environmental
friendliness.
* Effective from production
in October 2010.
High-speed response time: 0.5 ms
A maximum
%
reduction
compared to conventional
sensors
35
The sensor is suitable for detecting small and high-
speed traveling objects.
Minimum sensing object: ø1 mm
ø0.039 in
EX-11(E)□, EX-15(E)□
EX-11□, EX-11E□,
EX-15
and
EX-15E
are incorporated
with ø1 mm
ø0.039 in
slit masks so that ø1 mm
ø0.039 in,
or more, object
can be detected. Hence,
they are suitable for precise
positioning or small parts
detection.
Long sensing range: 1 m
3.281 ft
EX-19
(
E
)
A sensing range of 1 m
3.281 ft
has been realized
with a slim size of just 3.5
mm
0.138 in.
It can be used
to detect even wide IC trays.
1m
3.281 ft
Background suppression
Hardly affected by background
Even a specular background
separated by 100 mm
3.937
in,
or more, is not detected.
(However, the background
should be directly opposite.
A spherical or curved
background may be
detected.)
Background
100 mm
3.937 in
EX-14□
Black object reliably detected
It can reliably detect dark
color objects since it is
convergent reflective type.
The best distance
is approx. 10 mm
0.394 in
from the
object.
4
Ultra-slim Photoelectric Sensor
EX-10
SERIES Ver.2
ENVIRONMENTAL RESISTANCE
Incorporated an inverter countermeasure circuit *
The
EX-10
series become
significantly stronger
against inverter light and
other extraneous light.
* Effective from production in
October 2010.
Fluorescent light
Waterproof IP67
The sensors features an IP67 rating to allow their use
in process lines where water is used or splashed.
Rust-resistant stainless steel sensor mounting brackets
are available.
Note: If water splashes on the sensor during sensing operation, it may
sense water as an object.
Bending durability
EX-□-R
Bending-resistant cable type
EX-□-R
is available. It is
most suitable for moving parts, such as robot arm, etc.
MOUNTING / SIZE
Mountable with M3 screws
Non-corrosive stainless steel type sensor mounting bracket is also available.
• MS-EX10-1
[Cold rolled carbon steel (SPCC)]
MS-EX10-11
[Stainless steel (SUS304)]
mounting bracket for the front
sensing type
• MS-EX10-2
[Cold rolled carbon steel (SPCC)]
MS-EX10-12
[Stainless steel (SUS304)]
mounting bracket for the side
sensing type
• MS-EX10-3
[Cold rolled carbon steel (SPCC)]
MS-EX10-13
[Stainless steel (SUS304)]
(L-shaped mounting bracket)
M3 screws
M3 screws
M3 screws
Note: Sensor mounting brackets can not be used for
the narrow beam type (EX-□S□).
Red beam makes beam alignment easy
The red LED beam projected from the emitter helps you
to align the sensor heads.
FUNCTIONS
VARIETIES
Bright 2-color indicator
A convenient 2-color
indicator has been
incorporated in the
miniature body.
2-color indicator
Orange: Operation indicator
Green: Stability indicator
Operation mode switch
EX-15□/17□
Thru-beam type sensor incorporated with an operation
mode switch on the bifurcation is also available. It helps
you to test the operability before start-up.
Operation mode switch
Operation indicator
(Orange)
SENS.
EX
-17
Even for the thru-beam
type sensor, only three
wires have to be connected.
OTHERS
Less resources used *
Based on environmental
considerations, simplified
packaging is used in order
to reduce waste.
In addition, the bag is
made from polyethylene
which produces no toxic
gases even when burned.
* Effective from production in
October 2010.
Ultra-slim Photoelectric Sensor
EX-10
SERIES Ver.2
5
ORDER GUIDE
Type
Appearance
Sensing range
150 mm
5.906 in
500 mm
19.685 in
1m
3.281 ft
With operation mode
switch on the bifurcation
150 mm
5.906 in
500 mm
19.685 in
150 mm
5.906 in
500 mm
19.685 in
1m
3.281 ft
With operation mode
switch on the bifurcation
150 mm
5.906 in
500 mm
19.685 in
Model No.(Note 2)
NPN output
EX-11A
EX-11B
EX-13A
EX-13B
EX-19A
EX-19B
EX-15
EX-17
EX-11EA
EX-11EB
EX-13EA
EX-13EB
EX-19EA
EX-19EB
EX-15E
EX-17E
EX-14A
PNP output
EX-11A-PN
EX-11B-PN
EX-13A-PN
EX-13B-PN
EX-19A-PN
EX-19B-PN
EX-15 -PN
EX-17-PN
EX-11EA-PN
EX-11EB-PN
EX-13EA-PN
EX-13EB-PN
EX-19EA-PN
EX-19EB-PN
-
-
EX-14A-PN
EX-14B-PN
EX-11SA-PN
EX-11SB-PN
EX-13SA-PN
EX-13SB-PN
EX-19SA-PN
EX-19SB-PN
EX-11SEA-PN
EX-11SEB-PN
EX-13SEA-PN
EX-13SEB-PN
Output
operation
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
Switchable
either
Light-ON or
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
Switchable
either
Light-ON or
Dark-ON
Output
Thru-beam
Front sensing
Convergent reflective
(Diffused beam type)
Front sensing
Side sensing
NPN open-
collector
transistor
or
PNP open-
collector
transistor
Standard type
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
NPN open-
collector
transistor
or
PNP open-
collector
transistor
2 to 25 mm
0.079 to 0.984 in
(Note 1)
(Convergent point: 10 mm
0.394 in)
EX-14B
EX-11SA
EX-11SB
EX-13SA
EX-13SB
EX-19SA
EX-19SB
EX-11SEA
EX-11SEB
EX-13SEA
EX-13SEB
150 mm
5.906 in
Front sensing
500 mm
19.685 in
1m
3.281 ft
150 mm
5.906 in
500 mm
19.685 in
Narrow beam type
Thru-beam
NOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets
(MS-EX10-□). Sensor mounting brackets (MS-EX10-□) can not be used for the narrow beam type (EX-□S□).
Notes: 1) The sensor does not detect even a specular background if it is separated by 100 mm
3.937 in
or more. (However, the background should be directly
opposite. A spherical or curved background may be detected.)
2) The model No. with “P”
shown on the label affixed to the thru-beam type sensor is the emitter, “D”
shown on the label is the receiver.
Bending-resistant cable type
Bending-resistant cable type is also available for NPN output type. (excluding narrow beam type
EX-□S□
and sensor with operation mode switch on the
bifurcation
EX-15□/17□)
When ordering this type, suffix “-R”
to the model No.
(e.g.) Bending-resistant cable type of
EX-11A
is “EX-11A-R”.
5 m
16.404 ft
cable length type
5 m
16.404 ft
cable length type (standard: 2 m
6.562 ft)
is also available for NPN output type. (excluding narrow beam type
EX-□S□
and bending-resistant cable type)
When ordering this type, suffix “-C5”
to the model No.
(e.g.) 5 m
16.404 ft
cable length type of
EX-11A
is “EX-11A-C5”.
Side sensing
查看更多>
EX-19A-PN 同类产品
最新光学传感器型号
CX-411-Z CX-493-P-Z SU18-16/40A/110/115/126A AS7341-DLGT LX-101-P-Z CX-411-P-J AS7221-BLGM EX-13EA-C5 CX-421-P-C5 T18-2VPFF200-Q8
查看该器件的人还看了
热门器件
热门资源推荐
器件捷径:
A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ
需要登录后才可以下载。
登录取消