RB521SM-40FH
Schottky Barrier Diode
(AEC-Q101 qualified)
Data sheet
●
Outline
V
R
I
o
I
FSM
40
200
1
V
mA
A
●
Inner Circuit
●
Features
High reliability
Small mold type
Super Low V
F
●
Application
Small current rectification
●
Structure
Epitaxial planar
●
Packaging Specifications
Packing
Embossed T
ape
Reel Size(mm)
180
T
aping Width(mm)
8
Quantity(pcs)
8000
T
aping Code
T2R
Marking
S
●
Absolute Maximum Ratings (T
a
= 25ºC unless otherwise stated)
Parameter
Repetitive peak reverse voltage
Reverse voltage
Average rectified forward current
Peak forward surge current
Junction temperature
Storage temperature
Symbol
V
RM
V
R
I
o
I
FSM
T
j
T
stg
Conditions
Duty
≦
0.5
Reverse direct voltage
Glass epoxy mounted
、
60Hz half sin
waveform
、
resistive load
60Hz half sin waveform
、
Non-repetitive
、
one cycle
、
T
a
=25
℃
Limits
45
40
200
1
150
-55
½
150
Unit
V
V
mA
A
℃
℃
-
-
●
Characteristics (T
a
= 25ºC unless otherwise stated)
Parameter
Forward voltage
Reverse current
※
Caution
：
static electricity
Symbol
V
F1
V
F2
V
F3
I
R1
I
R2
Conditions
I
F
=10mA
I
F
=100mA
I
F
=200mA
V
R
=10V
V
R
=40V
Min. Typ. Max. Unit
0.16 0.26 0.3
0.31 0.395 0.45
0.41 0.495 0.54
-
3.5
20
-
13
90
V
V
V
μA
μA
Attention
www.rohm.com
© 2016- ROHM Co., Ltd. All rights reserved.
1/4
2019/07/18_Rev.006
RB521SM-40FH
●
Characteristic Curves
Data sheet
www.rohm.com
2/4
© 2016- ROHM Co., Ltd. All rights reserved.
2019/07/18_Rev.006
RB521SM-40FH
●
Characteristic Curves
Data sheet
www.rohm.com
3/4
© 2016 ROHM Co., Ltd. All rights reserved.
2019/07/18_Rev.006
RB521SM-40FH
Data sheet
●
Dimensions
(SOD-523 SC-79 EMD2)
●
Taping (Unit:mm)
www.rohm.com
4/4
© 2016 ROHM Co., Ltd. All rights reserved.
2019/07/18_Rev.006
Notice
Precaution on using ROHM Products
1.
If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment
(Note 1)
,
aircraft/spacecraft, nuclear power controllers, etc.) and whose malfunction or failure may cause loss of human life,
bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales
representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any
ROHM’s Products for Specific Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU
CHINA
CLASSⅢ
CLASSⅡb
CLASSⅢ
CLASSⅢ
CLASSⅣ
CLASSⅢ
2.
ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
Our Products are not designed under any special or extraordinary environments or conditions, as exemplified below.
Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the
use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our
Products under any special or extraordinary environments or conditions (as exemplified below), your independent
verification and confirmation of product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl
2
,
H
2
S, NH
3
, SO
2
, and NO
2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (Exclude cases where no-clean type fluxes is used.
However, recommend sufficiently about the residue.); or Washing our Products by using water or water-soluble
cleaning agents for cleaning residue after soldering
[h] Use of the Products in places subject to dew condensation
The Products are not subject to radiation-proof design.
Please verify and confirm characteristics of the final or mounted products in using the Products.
In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse, is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in
the range that does not exceed the maximum junction temperature.
Confirm that operation temperature is within the specified range described in the product specification.
ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
3.
4.
5.
6.
7.
8.
9.
Precaution for Mounting / Circuit board design
1.
When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM representative in advance.
2.
For details, please refer to ROHM Mounting specification
Notice-PAA-E
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.004
