This application note presents a reference design for a rear combination lamp (RCL) LED driver in a 3-series, 3-parallel (3S3P) configuration. Using the MAX16823 linear driver and external BJTs, this design provides 200mA per string as well as enhanced heat dissipation. Also included is PWM dimming circuitry for tail-light inputs and full brightness for brake-light inputs. Double-battery and load-dump conditions have been taken into consideration.

  查看详情

This is a reference design for a SEPIC/linear LED-display backlight driver for eight parallel strings of 8 WLEDs (white LEDs) at 70mA/string. The dimming ratio is 4000:1. The input voltage is 16V to 36V with 50V transients. The design combines a SEPIC switching power supply with adaptive feedback and linear current sinks for high dimming ratios. The MAX16809 16-channel LED driver is featured.

  查看详情

This reference design is for a buck-boost LED driver. The MAX16834 current-mode high-brightness LED driver is featured, and the MAX16834 EV (evaluation) kit is used to implement the design. The application note shows the design specifications, schematic, bill of materials (BOM), and performance data.

  查看详情

The MAX16974/MAX16975/MAX16976 high-performance DC-DC converters are standard buck controllers designed for automotive applications. This application note explains how to optimize the layout of these ICs. An example layout is provided at the end of the document.

  查看详情

This reference design describes how to design hardware for a temperature-based heating system for a vehicle that has an engine preheater installed, based on ambient temperature and a preordained engine start time. This system can also be used for other purposes, such as turning on a storage heater if the ambient temperature falls below a preordained value.

  查看详情

FRDM-KEAZ128恩智浦^®Freedom开发平台是一款小型化、高性价比的评估和开发系统，适用于超高可靠性微控制器(MCU)系列的快速应用原型设计和演示。

  查看详情

面向MC33975多开关检测接口的评估套件，可检测多达22个开关触点的关闭和开启，以及与MCU的SPI通信。

  查看详情

TWR-S08JE128-KIT是面向MC9S08JE低功耗USB微控制器的低成本开发工具。该套件是恩智浦塔式系统的一部分，是一个模块化、可重新配置的开发平台，使设计人员能够通过封装评估板、工具和运行软件加快产品上市速度。

  查看详情

TWR- S08RN60模块是面向S08RN 8汽车MCU的开发板。

  查看详情

The TWR-S12GN32 is a demonstration board for the NXP^® MC9S12GN32 automotive 16-bit MCUs.

  查看详情

TWR-S12G128是面向恩智浦MC9S12G128汽车16位MCU的演示板。

  查看详情

The NXP MTRCKTDPS5643L development kit is ideal for applications requiring 2 PMSM motors, such as active suspension or electric powertrain.

  查看详情

MTRCKTSBN5643L: Single 3-phase Sensorless BLDC Development Kit with Qorivva MPC5643L MCU.

  查看详情

The MTRCKTSBN5604P motor control development kit is ideal for sensorless applications requiring one BLDC motor, such as HVAC or electric pumps.

  查看详情

恩智浦 MTRCKTSPS5643L开发套件适用于需要一个 PMSM电机的应用，如主动悬架和电动动力总成。

  查看详情

The NXP MTRCKTSPS5604P development kit is ideal for applications requiring one PMSM motor, such as active suspension or electric powertrain.

  查看详情

面向汽车电机控制应用的评估板。BLDC和PMSM电机的理想之选，支持快速原型设计和评估。

  查看详情

S12ZVM系列整合了构建紧凑型节能的3相永磁同步电机(或BLDC)电机控制所需的所有元素。

  查看详情

恩智浦StarterTRAK USB套件(TRK-USB-S12G128)可轻松并经济地为恩智浦16位S12G MCU提供测试驱动。

  查看详情

Qorivva MPC5634M系列32位MCU适用于摩托车、汽车的四缸发动机控制以及混合动力电机等应用。

  查看详情