Nowadays, so called plug in hybrid as well as fully electric vehicles are catching more and more attraction triggered by the reduction of pollution as it is normally happening with pure combustion engine. Nevertheless, there is at least one feature that is common to all of them electric energy is accumulated in dedicated battery pack and it is used in electric motors afterwards. Although this technology still undergoes heavy development nowadays, so do also relevant technical standards, it is clear that charging energy is provided utilizing existing mains infrastructure.
Hand in hand, it implies certain requirements put on chargers, those installed On Board as well as on those installed Off Board.
欢迎加入EEWorld参考设计群,也许能碰到搞同一个设计的小伙伴,群聊设计经验和难点。 入群方式:微信搜索“helloeeworld1”或者扫描二维码,备注:参考设计,即可被拉入群。 另外,如您在下载此设计遇到问题,也可以微信添加“helloeeword1”及时沟通。
- 用于 LED 照明的 DC 到 DC 单路输出电源
- NCP508SQ33T1GEVB:3.3 V WDFN 评估板
- 使用 ON Semiconductor 的 LM78M05 的参考设计
- MC33074DR2G 运算放大器用作晶体管驱动器的典型应用
- NS5S1153MUGEVB,用于便携式音频的单 DPDT 模拟开关的评估板
- 使用 ON Semiconductor 的 CAT3643 的参考设计
- 40W, 9V, 12V, 16V, 24V AC转DC多路输出电源适配器AC转DC电源
- NB7V52MMNGEVB:1.8 V/2.5 V 差分 D 触发器评估板
- MC34072ADR2G 交流耦合反相放大器的典型应用
- NCP171AMX250245TCGEVB:NCP171:LDO 稳压器,超低 50nA Iq,具有双电源模式,80mA 评估板