The STEVAL-ISA099V1 demonstration board is a step-down switching power supply based on the L7986 in DFN10 package.
The L7986 is a step-down regulator with a 3.7 A (minimum) current limited embedded power MOSFET, so it is able to deliver up to 3 A current to the load depending on the application conditions.
The input voltage can range from 4.5 V to 38 V, while the output voltage can be set starting from 0.6 V to VIN.
Requiring a minimum set of external components, the device includes an internal 250 kHz switching frequency oscillator that can be externally adjusted up to 1 MHz.
主要特性
- 3 A DC output current
- From 4.5 V to 38 V range input voltage
- Output voltage adjustable from 0.6 V
- 250 kHz switching frequency programmable up to 1 MHz
- Internal soft-start and enable
- Low dropout operation: 100% duty cycle
- Voltage feed-forward
- Zero load current operation
- Overcurrent and thermal protection
- RoHS compliant
欢迎加入EEWorld参考设计群,也许能碰到搞同一个设计的小伙伴,群聊设计经验和难点。 入群方式:微信搜索“helloeeworld1”或者扫描二维码,备注:参考设计,即可被拉入群。 另外,如您在下载此设计遇到问题,也可以微信添加“helloeeword1”及时沟通。
- ST25R3916高性能NFC通用设备和EMVCo读取器的开发套件
- 基于LED6000的反相升降压0.5A LED驱动器板
- 基于SPV1050的能量收集评估套件
- 基于VIPer318L的15V / 1.2A SSR反激转换器
- 适用于STM32L011K4 MCU的STM32 Nucleo-32开发板,支持Arduino nano连接
- 基于STEF05和STEF12电子保险丝的5 V和12 V电源线保护
- VNQ7003SY评估板
- LIS2MDL适配器板,标准DIL24插座
- ST25-TAG-BAG-U包含五个不同的项目(每种类型五个),它们全部基于NFC forum type 5 标签芯片(ST25TV512和ST25TV02K)或 NFC forum type 4标签芯片(ST25TA02KB和ST25TA64K)
- SPIRIT1-低数据速率收发器-169 MHz-全套件