The NCV881930 is a 410 kHz fixed−frequency low quiescent current buck controller with spread spectrum that operates up to 38 V (typical). It may be synchronized to a clock or to separate NCV881930. Peak current mode control is employed for fast transient response and tight regulation over wide input voltage and output load ranges. Feedback compensation is internal to the device, permitting design simplification. The NCV881930 is capable of converting from an automotive input voltage range of 3.5 V (4.5 V during startup) to 18 V at a constant base switching frequency. Under load dump conditions up to 45 V the regulator shuts down. A high voltage bias regulator with automatic switchover to an external 5 V bias supply is used for improved efficiency. Several protection features such as UVLO, current limit, short circuit protection, and thermal shutdown are provided. High switching frequency produces low output voltage ripple even when using small inductor values and an all−ceramic output filter capacitor, forming a space−efficient switching solution. |
参考设计下载
群聊设计,与管理员及时沟通
欢迎加入EEWorld参考设计群,也许能碰到搞同一个设计的小伙伴,群聊设计经验和难点。 入群方式:微信搜索“helloeeworld1”或者扫描二维码,备注:参考设计,即可被拉入群。 另外,如您在下载此设计遇到问题,也可以微信添加“helloeeword1”及时沟通。
网友评论
相关项目
- AND8135/D,高效大功率手电筒评估板
- NBC124XXEVB:PLL 合成时钟发生器评估板
- LV5818M Bi CMOS IC降压开关稳压器的典型应用
- Fan2356 Tiny buck 6 A集成同步降压稳压器的典型应用
- NCV33269 800mA 可调输出、低压降稳压器、电流调节器的典型应用
- MC33074DR2G 二阶低通有源滤波器的典型应用
- 使用 ON Semiconductor 的 MC33129 的参考设计
- NCS211RSQT2GEVB:电流检测放大器
- AN-6104,使用 FAN7688 的半桥 LLC 谐振转换器设计应用笔记
- NB4N441MNGEVB,用于 NB4N441 的评估板,用于 SONET 的 12.5 至 425 MHz PLL 时钟发生器
电路图
更多>
下载中心
更多>
大学堂
更多>
论坛推荐
更多>