[求助] 求助芯片F28377D建立的 SYS/BIOS例程

求助芯片F28377D建立的 SYS/BIOS例程。

能够烧写此芯片后运行的简单例程，谢谢。

楼主问题解决了吗

 此程序为TMS320F28377D控制LED的例程，需要你自己建立CCS工程自己编译运行。

//###########################################################################
//
// FILE:   blinky_cpu01.c
//
// TITLE:  LED Blink Example for F2837xD.
//
//! \addtogroup cpu01_example_list
//! <h1> Blinky </h1>
//!
//! This example blinks LED X
//!
//! \note If using a Launchpad, use the Launchpad build configurations.
//!
//
//###########################################################################
// $TI Release: F2837xD Support Library v210 $
// $Release Date: Tue Nov  1 14:46:15 CDT 2016 $
// $Copyright: Copyright (C) 2013-2016 Texas Instruments Incorporated -
//             http://www.ti.com/ ALL RIGHTS RESERVED $
//###########################################################################

//
// Included Files
//
#include "F28x_Project.h"

//
// Defines
//
#define BLINKY_LED_GPIO    31

void main(void)
{
//
// Step 1. Initialize System Control:
// PLL, WatchDog, enable Peripheral Clocks
// This example function is found in the F2837xD_SysCtrl.c file.
//
    InitSysCtrl();

//
// Step 2. Initialize GPIO:
// This example function is found in the F2837xD_Gpio.c file and
// illustrates how to set the GPIO to it's default state.
//
    InitGpio();
    GPIO_SetupPinMux(BLINKY_LED_GPIO, GPIO_MUX_CPU1, 0);
    GPIO_SetupPinOptions(BLINKY_LED_GPIO, GPIO_OUTPUT, GPIO_PUSHPULL);

//
// Step 3. Clear all interrupts and initialize PIE vector table:
// Disable CPU interrupts
//
    DINT;

//
// Initialize the PIE control registers to their default state.
// The default state is all PIE interrupts disabled and flags
// are cleared.
// This function is found in the F2837xD_PieCtrl.c file.
//
    InitPieCtrl();

//
// Disable CPU interrupts and clear all CPU interrupt flags:
//
    IER = 0x0000;
    IFR = 0x0000;

//
// Initialize the PIE vector table with pointers to the shell Interrupt
// Service Routines (ISR).
// This will populate the entire table, even if the interrupt
// is not used in this example.  This is useful for debug purposes.
// The shell ISR routines are found in F2837xD_DefaultIsr.c.
// This function is found in F2837xD_PieVect.c.
//
    InitPieVectTable();

//
// Enable global Interrupts and higher priority real-time debug events:
//
    EINT;  // Enable Global interrupt INTM
    ERTM;  // Enable Global realtime interrupt DBGM

//
// Step 6. IDLE loop. Just sit and loop forever (optional):
//
    for(;;)
    {
        //
        // Turn on LED
        //
        GPIO_WritePin(BLINKY_LED_GPIO, 0);

        //
        // Delay for a bit.
        //
        DELAY_US(1000*500);

        //
        // Turn off LED
        //
        GPIO_WritePin(BLINKY_LED_GPIO, 1);

        //
        // Delay for a bit.
        //
        DELAY_US(1000*500);
    }
}

//
// End of file
//

以下为TMS320F28377D的各种外设例程，需要的请自行下载。

TMS320F28377D v210各种外设驱动例程.rar (21.52 MB)
(下载次数: 30, 2021-2-6 16:05 上传)