[讨论] IAR 7.1支持TI的XDS100仿真器了!

dontium   2014-3-19 22:16 楼主
IAR 7.1支持TI的XDS100仿真器了!
Hardware debugging support:
Probe (JTAG/SWD)Note
I-jetSupports all ARM7,ARM9,ARM11 and Cortex-M/R/A cores. Enables power debugging.
JTAGjet-TraceSupports ETM on all ARM7,ARM9,ARM11 and Cortex-M/R/A cores.
JTAGjet
Supports all ARM7,ARM9,ARM11 and Cortex-M/R/A cores.
J-Link
Supports all ARM7,ARM9,ARM11 and Cortex-M/R/A cores.
J-Link Ultra
Supports all ARM7,ARM9,ARM11 and Cortex-M/R/A cores. Supports power debugging on Cortex-M4/M5 cores.
J-TraceSupports ETM on all ARM7, ARM9 and Cortex-M3/M4 cores, and JTAG/SWD on the same cores as J-Link.
RDISupports RDI (Remote Debug Interface) based debug probes.
GDB server
Jeeni EPI
Stellaris FTDI
LMI FTDI driver
Stellaris ICDI
Macraigor OCDemonmpDemon, usbDemon, usb2Demon, usb2Sprite
P&E Micro JTAG probesMultilink, Cyclone, OSJTAG
STMicroelectronics ST-LINK V2Supports STM32 devices
STMicroelectronics ST-LINKSupports STM32 devices
SAM-ICESupports Atmel AT91SAM devices
J-Link Lite LPC EditionSupports ARM based devices from NXP
mIDASLinkSupports devices from Analog Devices
DIGI JTAG LinkSupports DIGI devices
XDS100Supports TI devices


a1.jpg



回复评论 (4)

6.4还是6.7的时候已经支持了
点赞  2014-3-20 09:16
我还在用5.3呢。下载地址呢。。
点赞  2014-3-20 10:03
引用: youluo 发表于 2014-3-20 10:03
我还在用5.3呢。下载地址呢。。

官网下载。本坛有破解文件。
点赞  2014-3-20 10:13
我的xds100在IAR 7.1下“download and  debug"失败,工程如附件所示,请已经可以正常的指导一下。
同样的代码我xds100在CCS5.5下可以正常下载和调试。

    IAR_TEST.zip (2014-4-11 10:09 上传)

    2.39 MB, 下载次数: 26

点赞  2014-4-11 10:12
电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 京公网安备 11010802033920号
    写回复