S8VS-09024BP,S8VS-09024BP pdf中文资料,S8VS-09024BP引脚图,S8VS-09024BP电路-Datasheet-电子工程世界

文档预览

New Product

Switch Mode Power Supply

S8VS

(15/30/60/90/120/180/240/480-W Models)

Multi-Function Indication Monitor

for Production Site Visualization

• Status displayed on 3-digit, 7-segment display.

• Signal output notifications at 90 W or more.

• Conformity to various safety standards for global

usability.

• Varied coverage with 3-year warranty.

Models with indication monitor

Refer to

Safety Precautions for All Power Supplies

and

Safety

Precautions

on page 32.

Recommended Noise Filter

Noise filter

S8V-NF

For more information, refer to

S8V-NF Noise

Filter Data Sheet

(Cat. No. T212-E1).

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

Model Number Structure

Model Number Legend

Note:

Not all combinations are possible. Refer to

List of Models

Ordering Information,

below.

S8VS-

@@@@@@@@-@

1. Power Ratings

015: 15 W

030: 30 W

060: 60 W

090: 90 W

120: 120 W

180: 180 W

240: 240 W

480: 480 W

2. Output voltage

05: 5 V

12: 12 V

24: 24 V

3 4 5

5. UL Class 2 Output Standards (UL 1310)

None: Does not conform.

Conforms.

15-W, 30-W, and 60-W models conform to Class 2

output standards (UL 1310).

Note:

The S option is available only for 90-W models.

6. Terminal Block Form

None: Screw terminal block

Screwless terminal block

3. Indication monitor

None: Without indication monitor (standard model)

With indication monitor (maintenance forecast

monitor)

With indication monitor (total run time monitor)

BE: With indication monitor but without alarm output

(total run time monitor)

4. Alarm output

None: Sinking (Emitter COM)

Sourcing (Collector COM)

Note:

No alarm output possible with 60-W models.

Both sinking and sourcing outputs are available for

480-W models.

Note:

Estimates can be provided for coatings and other specifications that are not given in the datasheet. Ask your OMRON representative for details.

S8VS

Ordering Information

List of Models

Note:

For details on normal stock models, contact your nearest OMRON representative.

Models without Indication Monitor (Standard Models)

Power ratings

Input voltage

Output voltage

15 W

12 V

24 V

30 W

60 W

90 W

120 W

180 W

240 W

480 W

100 to 240 VAC

24 V

100 to 240 VAC

(allowable range:

85 to 264 VAC or

80 to 370 VDC

*3)

12 V

24 V

Output current

2.0 A

1.2 A

0.65 A

4.0 A

2.5 A

1.3 A

2.5 A

3.75 A

7.5 A

10 A

20 A

Peak current 30 A

(200 VAC)

UL Class 2

Output standards

Yes

---

Yes

---

Model number

(screw terminal block)

S8VS-01505

S8VS-01512

S8VS-01524

S8VS-03005

S8VS-03012

S8VS-03024

S8VS-06024

S8VS-09024

S8VS-09024S

S8VS-12024

S8VS-18024

S8VS-24024

S8VS-48024

S8VS-06024-F

S8VS-09024-F

S8VS-09024S-F

S8VS-12024-F

S8VS-18024-F

S8VS-24024-F

S8VS-48024-F

---

Model number

(screwless terminal block)

*1.

The output capacity of the S8VS-01505 is 10 W.

*2.

The output capacity of the S8VS-03005 is 20 W.

*3.

The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).

Models with Indication Monitor (Maintenance Forecast Monitor)

Power ratings

60 W

Input voltage

Output

voltage

Output current

2.5 A

Alarm

output

---

Sinking

90 W

100 to 240

VAC

(allowable

range: 85 to

264 VAC or 80

to 370 VDC

*1)

3.75 A

Sinking

Sourcing

24 V

7.5 A

10 A

100 to 240

VAC

20 A

Peak current 30 A

(200 VAC)

Sinking

Sourcing

Sinking

Sourcing

Sinking

Sourcing

Sinking/

sourcing

UL Class 2

Output standards

Yes

---

Yes

---

Yes

---

Model number

(screw terminal block)

S8VS-06024A

S8VS-09024A

S8VS-09024AS

S8VS-09024AP

S8VS-09024APS

S8VS-12024A

S8VS-12024AP

S8VS-18024A

S8VS-18024AP

S8VS-24024A

S8VS-24024AP

S8VS-48024A

Model number

(screwless terminal block)

S8VS-06024A-F

S8VS-09024A-F

S8VS-09024AS-F

S8VS-09024AP-F

S8VS-09024APS-F

S8VS-12024A-F

S8VS-12024AP-F

S8VS-18024A-F

S8VS-18024AP-F

S8VS-24024A-F

S8VS-24024AP-F

S8VS-48024A-F

120 W

180 W

240 W

480 W

*1.

The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).

*2.

In the

Alarm output

column, “sinking” indicates an emitter COM and “sourcing” indicates a collector COM.

Models with Indication Monitor (Total Run Time Monitor)

Power ratings

60 W

Input voltage

Output

voltage

Output current

2.5 A

Alarm

output

---

90 W

100 to 240

VAC

(allowable

range: 85 to

264 VAC or 80

to 370 VDC)

3.75 A

Sinking

Sourcing

---

24 V

Sinking

Sourcing

---

7.5 A

Sinking

Sourcing

---

240 W

10 A

20 A

Peak current 30 A

(200 VAC)

Sinking

Sourcing

480 W

100 to 240

VAC

Sinking/

sourcing

UL Class 2

Output standards

Yes

---

Yes

---

Yes

---

Yes

---

Model number

(screw terminal block)

S8VS-06024B

S8VS-09024BE

S8VS-09024BES

S8VS-09024B

S8VS-09024BS

S8VS-09024BP

S8VS-09024BPS

S8VS-12024BE

S8VS-12024B

S8VS-12024BP

S8VS-18024BE

S8VS-18024B

S8VS-18024BP

S8VS-24024BE

S8VS-24024B

S8VS-24024BP

S8VS-48024B

Model number

(screwless terminal block)

S8VS-06024B-F

S8VS-09024BE-F

S8VS-09024BES-F

S8VS-09024B-F

S8VS-09024BS-F

S8VS-09024BP-F

S8VS-09024BPS-F

S8VS-12024BE-F

S8VS-12024B-F

S8VS-12024BP-F

S8VS-18024BE-F

S8VS-18024B-F

S8VS-18024BP-F

S8VS-24024BE-F

S8VS-24024B-F

S8VS-24024BP-F

S8VS-48024B-F

120 W

180 W

*1.

The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).

*2.

In the

Alarm output

column, “sinking” indicates an emitter COM and “sourcing” indicates a collector COM.

Note:

Refer to pages 24 to 25 for the options that available.

S8VS

Specifications

Ratings/Characteristics

Power ratings

Item

Efficiency

Voltage

Frequency

Current

Input

Power factor

Harmonic current regulation

Leakage current

Inrush current

With 100-VAC input

With 200-VAC input

With 100-VAC input

With 200-VAC input

With 100-VAC input

With 200-VAC input

Output voltage

With 100-VAC input

With 200-VAC input

74% typical

73% typical

15 W

12 V

79% typical

78% typical

24 V

83% typical

80% typical

74% typical

30 W

12 V

81% typical

80% typical

24 V

85% typical

86% typical

100 to 240 VAC (allowable range: 85 to 264 VAC, 80 to 370 VDC

*5)

50/60 Hz (47 to 450 Hz)

0.45 A max., 0.34 A typical

0.25 A max., 0.22 A typical

---

Conforms to EN61000-3-2

0.5 mA max.

1.0 mA max.

17.5 A max., 14 A typical

35 A max., 28 A typical

−10%

to 15% (with V.ADJ)

60 mV max.

70 mV max.

60 mV max.

90 mV max.

150 mV max.

0.5% max. (at 85- to 264-VAC input, 100% load)

2.0% max. (5 V), 1.5% max. (12 V, 24 V), (with rated input, 0 to 100% load)

0.05%/°C max.

580 ms typical

340 ms typical

39 ms typical

187 ms typical

Yes

Yes (color: red)

No (However, backup operation is possible. An external diode is required.)

Models with 24-V output: Possible for up to 2 Power Supplies (with external diode)

Models with 5- or 12-V output: Not possible

Refer to the derating curve in

Engineering Data.

(with no icing or condensation)

−25

to 65°C

25% to 85% (Storage humidity: 25% to 90%)

3.0 kVAC for 1 min. (between all inputs and outputs; detection current: 20 mA)

2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA)

1.0 kVAC for 1 min. (between all outputs and PE terminals; detection current: 20 mA)

100 MΩ min. (between all outputs and all inputs/ PE terminals) at 500 VDC

10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions

150 m/s

, 3 times each in ±X, ±Y, and ±Z directions

Yes (color: green)

Conducted

Emissions

Radiated Emissions

Conforms to EN55011 Group1 Class B and based on FCC Class A

Conforms to EN55011 Group1 Class B

Conforms to EN61204-3 high severity levels

UL 508 (Listing, Class2 Output: Per 1310)

UL 60950-1, UL 62368-1

CSA C22.2 No.107.1 (cUL) (Class2 Output: Per CSA C22.2 No.223)

CSA C22.2 No.60950-1 (cUR), No.62368-1

EN 50178, EN 60950-1, EN 62368-1

EAC mark, RCM mark

F47-0706 (With 200-VAC input)

160 g max.

180 g max.

530 ms typical

360 ms typical

27 ms typical

134 ms typical

600 ms typical

400 ms typical

28 ms typical

134 ms typical

500 ms typical

360 ms typical

31 ms typical

174 ms typical

560 ms typical

380 ms typical

22 ms typical

123 ms typical

560 ms typical

400 ms typical

31 ms typical

140 ms typical

0.9 A max., 0.66 A typical

0.6 A max., 0.4 A typical

Voltage adjustment range

Ripple noise voltage (at rated I/O)

Input variation influence

Load variation influence

(rated input voltage)

Output

Temperature variation influence

Startup time

(at rated I/O)

Output hold time

(at rated I/O)

Overload protection

Overvoltage protection

Output voltage indication

Output current indication

Peak-hold current indication

Maintenance forecast monitor indication

Additional

functions

Maintenance forecast monitor output

Total run time monitor indication

Total run time monitor output

Undervoltage alarm indication

Undervoltage alarm output

Parallel operation

Series operation

Operating ambient temperature

Storage temperature

Operating ambient humidity

Dielectric strength

Insulation resistance

Vibration resistance

Shock resistance

Output indicator

Other

EMI

EMS

With 100-VAC input

With 200-VAC input

With 100-VAC input

With 200-VAC input

The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).

Approved standards

SEMI

Weight

*1.

Do not use an inverter output for the Power Supply. Inverters with an output frequency of 50/60 Hz are available, but the rise in the internal

temperature of the Power Supply may result in ignition or burning.

*2.

For a cold start at 25°C. Refer to

Engineering Data

on page 18 for details.

*3.

If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than +15% of the voltage adjustment range. When adjusting

the output voltage, confirm the actual output voltage from the Power Supply and be sure that the load is not damaged.

*4.

To reset the protection, turn OFF the input power for three minutes or longer and then turn it back ON.

*5.

The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).

S8VS

Power ratings

Item

Efficiency

Voltage

Frequency

Current

Input

Power factor

Harmonic current regulation

Leakage current

Inrush current

With 100-VAC input

With 200-VAC input

With 100-VAC input

With 200-VAC input

With 100-VAC input

With 200-VAC input

Type

With 100-VAC input

With 200-VAC input

84% typical

83% typical

50/60 Hz (47 to 450 Hz)

1.7 A max., 1.3 A typical

1.0 A max., 0.68 A typical

---

Conforms to EN61000-3-2

0.5 mA max.

1.0 mA max.

17.5 A max., 14 A typical

35 A max., 28 A typical

Standard

83% typical

85% typical

60 W

Maintenance forecast monitor

Total run time monitor

100 to 240 VAC (allowable range: 85 to 264 VAC or 80 to 370 VDC

*11)

1.7 A max., 1.3 A typical

1.0 A max., 0.78 A typical

Voltage adjustment range

Ripple noise voltage (at rated I/O)

Input variation influence

Load variation influence (rated input voltage)

Output

Temperature variation influence

Startup time

(at rated I/O)

Output hold time

(at rated I/O)

With 100-VAC input

With 200-VAC input

With 100-VAC input

With 200-VAC input

−10%

to 15% (with V. ADJ) (The voltage cannot be adjusted for the S8VS-09024@@@S-@.)

70 mV max.

1.5% max. (with rated input, 0 to 100% load)

0.05%/°C max.

620 ms typical

400 ms typical

34 ms typical

158 ms typical

Yes

No (However, backup operation is possible. An external diode is required.)

Yes for up to 2 Power Supplies (with external diode)

Refer to the derating curve in . (with no icing or condensation)

−25

to 65°C

25% to 85% (Storage humidity: 25% to 90%)

3.0 kVAC for 1 min. (between all inputs and outputs/ alarm outputs; detection current: 20 mA)

2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA)

1.0 kVAC for 1 min. (between all outputs/ alarm outputs and PE terminals; detection current for standard models: 30 mA, detection

current for models with indication monitor: 20 mA)

500 VAC for 1 min. (between all outputs and alarm outputs; detection current: 20 mA)

100 MΩ min. (between all outputs/ alarm outputs and all inputs/ PE terminals) at 500 VDC

10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions

10 to 150 Hz, 0.35-mm single amplitude (5 G max.) for 80 min each in X, Y, and Z directions

150 m/s

, 3 times each in ±X, ±Y, and ±Z directions

Yes (color: green)

Models with indication monitor: Conforms to EN55011 Group1 Class A and based on FCC Class A, Conforms to EN55011 Group1

Class B

*11

Standard models: Conforms to EN61204-3 EN55011 Group 1 Class B and based on FCC Class A

Models with indication monitor: Conforms to EN55011 Group1 Class A, Conforms to EN55011 Group1 Class B

*11

Standard models: Conforms to EN55011 Group1 Class B

Conforms to EN61204-3 high severity levels

UL 508 (Listing; Class 2 Output: Per UL1310)

UL 60950-1 (Recognition), UL 62368-1

CSA C22.2 No.107.1 (cUL) (Class 2 Output: Per CSA C22.2 No. 223)

CSA C22.2 No.60950-1 (cUR), No.62368-1

EN 50178, EN 60950-1, EN 62368-1

EAC mark, RCM mark

With indication monitor: UL 508 (Listing, Class2 Output: Per 1310)

CSA C22.2 No.107.1 (cUL) (Class2 Output: Per CSA C22.2 No.223)

EN 62477-1

EAC mark, RCM mark, KOSHA S Mark

*10

F47-0706 (With 200-VAC input)

330 g max.

Standard model:

Yes (selectable)

460 ms typical

290 ms typical

33 ms typical

154 ms typical

90 mV max.

0.5% max. (at 85- to 264-VAC input, 100% load)

Overload protection

Overvoltage protection

*2, *4

Output voltage indication

Output current indication

Peak-hold current indication

Additional

functions

Maintenance forecast monitor indication

Maintenance forecast monitor output

Total run time monitor indication

Total run time monitor output

Undervoltage alarm indication

Undervoltage alarm output terminals

Parallel operation

Series operation

Operating ambient temperature

Storage temperature

Operating ambient humidity

105% to 160% of rated load current (101% to 110% of rated load current for the S8VS-09024@@@S-@), inverted L voltage drop, intermittent, automatic reset

Dielectric strength

Insulation resistance

Vibration resistance

Shock resistance

Output indicator

Other

Conducted

Emissions

Radiated

Emissions

EMS

EMI

Approved standards

*11

SEMI

*11

Weight

*1.

Do not use an inverter output for the Power Supply. Inverters with an output frequency of 50/60 Hz are available, but the rise in the internal temperature of the Power Supply may result in

ignition or burning.

*2.

For a cold start at 25°C. Refer to

Engineering Data

on page 18 for details.

*3.

If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than +15% of the voltage adjustment range (by more than +10% for 240-W models with indication monitor).

When adjusting the output voltage, confirm the actual output voltage from the Power Supply and be sure that the load is not damaged.

*4.

To reset the protection, turn OFF the input power for three minutes or longer and then turn it back ON.

*5.

Displayed on 7-segment LED. (character height: 8 mm)

*6.

Resolution of output voltage indication: 0.1 V, Precision of output voltage indication:

±2%

(percentage of output voltage value,

±1

digit)

*7.

Resolution of output current indication: 0.1 A; Precision of output current indication:

±5%

F.S.

±1

digit max. (specified by rated output voltage)

*8.

Resolution of peak-hold current indication: 0.1 A; Precision of peak-hold current indication:

±5%

F.S.

±1

digit max. (specified by rated output voltage);

Signal width required for peak-hold current: 20 ms

*9.

A Type and B Type: Sinking, AP Type and BP Type: Sourcing, BE Type: No alarm output.

*10.

S8VS-06024A, S8VS-09024A/AP, S8VS-12024A/AP, S8VS-18024A/AP, and S8VS-24024A/AP only

*11.

The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).

S8VS

Power ratings

Item

Efficiency

Voltage

Frequency

Current

Input

Power factor

Harmonic current regulation

Leakage current

Inrush current

With 100-VAC input

With 200-VAC input

With 100-VAC input

With 200-VAC input

With 100-VAC input

With 200-VAC input

Type

With 100-VAC input

With 200-VAC input

83% typical

84% typical

50/60 Hz (47 to 450 Hz)

2.3 A max., 1.9 A typical

1.4 A max., 1.0 A typical

---

Conforms to EN61000-3-2

0.5 mA max.

1.0 mA max.

17.5 A max., 14 A typical

35 A max., 28 A typical

Standard

83% typical

85% typical

90 W

Maintenance forecast monitor

Total run time monitor

100 to 240 VAC (allowable range: 85 to 264 VAC or 80 to 370 VDC

*11)

2.3 A max., 1.9 A typical

1.4 A max., 1.2 A typical

Voltage adjustment range

Ripple noise voltage (at rated I/O)

Input variation influence

Load variation influence (rated input voltage)

Output

Temperature variation influence

Startup time

(at rated I/O)

Output hold time

(at rated I/O)

With 100-VAC input

With 200-VAC input

With 100-VAC input

With 200-VAC input

−10%

to 15% (with V. ADJ) (The voltage cannot be adjusted for the S8VS-09024@@@S-@.)

250 mV max.

1.5% max. (with rated input, 0 to 100% load)

0.05%/°C max.

460 ms typical

300 ms typical

28 ms typical

132 ms typical

Yes

Yes (selectable)

Yes (transistor output), 30 VDC max., 50 mA max.

Yes (selectable)

Yes (transistor output), 30 VDC max., 50 mA max.

660 ms typical

420 ms typical

28 ms typical

136 ms typical

150 mV max.

0.5% max. (at 85- to 264-VAC input, 100% load)

Overload protection

Overvoltage protection

*2, *4

Output voltage indication

Output current indication

Peak-hold current indication

Additional

functions

Maintenance forecast monitor indication

Maintenance forecast monitor output

Total run time monitor indication

Total run time monitor output

Undervoltage alarm indication

Undervoltage alarm output terminals

Parallel operation

Series operation

Operating ambient temperature

Storage temperature

Operating ambient humidity

105% to 160% of rated load current (101% to 110% of rated load current for the S8VS-09024@@@S-@), inverted L voltage drop, intermittent, automatic reset

No (However, backup operation is possible. An external diode is required.)

Yes for up to 2 Power Supplies (with external diode)

Refer to the derating curve in . (with no icing or condensation)

−25

to 65°C

25% to 85% (Storage humidity: 25% to 90%)

3.0 kVAC for 1 min. (between all inputs and outputs/ alarm outputs; detection current: 20 mA)

2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA)

1.0 kVAC for 1 min. (between all outputs/ alarm outputs and PE terminals; detection current for standard models: 30 mA, detection

current for models with indication monitor: 20 mA)

500 VAC for 1 min. (between all outputs and alarm outputs; detection current: 20 mA)

100 MΩ min. (between all outputs/ alarm outputs and all inputs/ PE terminals) at 500 VDC

10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions

10 to 150 Hz, 0.35-mm single amplitude (5 G max.) for 80 min each in X, Y, and Z directions

150 m/s

, 3 times each in ±X, ±Y, and ±Z directions

Yes (color: green)

Conducted

Emissions

Radiated

Emissions

Models with indication monitor: Conforms to EN55011 Group1 Class A and based on FCC Class A, Conforms to EN55011 Group1

Class B

*11

Standard models: Conforms to EN61204-3 EN55011 Group 1 Class B and based on FCC Class A

Models with indication monitor: Conforms to EN55011 Group1 Class A, Conforms to EN55011 Group1 Class B

*11

Standard models: Conforms to EN55011 Group1 Class B

Conforms to EN61204-3 high severity levels

UL 508 (Listing)

(S8VS-09024S-@ only): UL 508 (Listing, Class2 Output: Per 1310)

UL 60950-1 (Recognition), UL 62368-1

CSA C22.2 No.107.1 (cUL)

(S8VS-09024S-@ only): CSA C22.2 No.107.1 (cUL) (Class2 Output: Per CSA C22.2 No.223)

CSA C22.2 No.60950-1 (cUR), No.62368-1

EN 50178, EN 60950-1, EN 62368-1

EAC mark, RCM mark

With indication monitor: UL 508 (Listing)

(S8VS-09024@@S-@ only): UL 508 (Listing, Class2 Output: Per 1310)

CSA C22.2 No.107.1

(S8VS-09024@@S-@ only): CSA C22.2 No.107.1 (cUL) (Class2 Output: Per CSA C22.2 No.223)

EN 62477-1

EAC mark, RCM mark, KOSHA S Mark

*10

F47-0706 (With 200-VAC input)

490 g max.

Standard model:

Dielectric strength

Insulation resistance

Vibration resistance

Shock resistance

Output indicator

Other

EMI

EMS

Approved standards

*11

SEMI

*11

Weight

*1.

Do not use an inverter output for the Power Supply. Inverters with an output frequency of 50/60 Hz are available, but the rise in the internal temperature of the Power Supply may result in

ignition or burning.

*2.

For a cold start at 25°C. Refer to

Engineering Data

on page 18 for details.

*3.

If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than +15% of the voltage adjustment range (by more than +10% for 240-W models with indication monitor).

When adjusting the output voltage, confirm the actual output voltage from the Power Supply and be sure that the load is not damaged.

*4.

To reset the protection, turn OFF the input power for three minutes or longer and then turn it back ON.

*5.

Displayed on 7-segment LED. (character height: 8 mm)

*6.

Resolution of output voltage indication: 0.1 V, Precision of output voltage indication:

±2%

(percentage of output voltage value,

±1

digit)

*7.

Resolution of output current indication: 0.1 A; Precision of output current indication:

±5%

F.S.

±1

digit max. (specified by rated output voltage)

*8.

Resolution of peak-hold current indication: 0.1 A; Precision of peak-hold current indication:

±5%

F.S.

±1

digit max. (specified by rated output voltage);

Signal width required for peak-hold current: 20 ms

*9.

A Type and B Type: Sinking, AP Type and BP Type: Sourcing, BE Type: No alarm output.

*10.

S8VS-06024A, S8VS-09024A/AP, S8VS-12024A/AP, S8VS-18024A/AP, and S8VS-24024A/AP only

*11.

The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).