Complete LSM6DSO pinout for a standard DIL 24 socket
Fully compatible with STEVAL-MKI109V3 motherboards
Changing the resistor settings is also compatible with the STEVAL-MKI109V2
motherboard
WEEE compliant
RoHS compliant
Description
STEVAL-MKI196V1is
an adapter board designed to facilitate the evaluation of MEMS
devices in the
LSM6DSO
product family. The board offers an effective solution for
fast system prototyping and device evaluation directly within the user’s own
application.
The STEVAL-MKI196V1 can be plugged into a standard DIL 24 socket. The adapter
provides the complete LSM6DSO pin-out and comes ready-to-use with the required
decoupling capacitors on the VDD power supply line.
This adapter is supported by the
STEVAL-MKI109V2
and
STEVAL-MKI109V3
with
high performance 32-bit microcontroller functioning as a bridge between the sensor
and a PC, on which it is possible to use the downloadable graphical user interface
(Unico GUI), or dedicated software routines for customized applications.
Product summary
LSM6DSO adapter board
STEVAL-
for a standard DIL24 socket
MKI196V1
iNEMO 6DoF inertial
module, ultra-low power
and high accuracy
ST MEMS adapter
motherboard based on the
STM32F401VET6
compatible with ST MEMS
adapters
ST MEMS adapters
motherboard based on
STM32F103, compatible
with all ST MEMS adapter
boards
LSM6DSO
STEVAL-
MKI109V3
STEVAL-
MKI109V2
DB3714
-
Rev 1
-
August 2018
For further information contact your local STMicroelectronics sales office.
www.st.com
STEVAL-MKI196V1
1
Schematic diagram
Figure 1.
STEVAL-MKI196V1 board schematic
DB3714
-
Rev 1
page 2/4
STEVAL-MKI196V1
Revision history
Table 1.
Document revision history
Date
28-Aug-2018
Version
1
Initial release.
Changes
DB3714
-
Rev 1
page 3/4
STEVAL-MKI196V1
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
嵌入式系统
