MCX Crimp Type Straight Connectors for Flexible Cable – 75 Ohm
1. Identify connector parts. (2 piece parts–except bulkhead)
2. Strip cable to dimensions shown. Do not nick braid
or center conductor. A wire stripper of correct size
is recommended for this step. Twist stranded center
conductor into tight bundle and tin (optional). Slide crimp
sleeve onto cable as shown.
3. Flare braid and slide cable into body making certain
that the cable dielectric bottoms against center contact.
Solder: Solder center conductor to contact through the
side access ports and hole in center contact. Use a
minimum amount of solder for a full fillet joint. .015 (0.38)
diameter solder is recommended. Crimp: Crimp Contact
Attachment: Crimp contact using 141-0000-924 dieset in
144-0000-900 tool frame.
4. Arrange braid uniformly around crimp stem. Slide crimp
sleeve over braid and access ports. Crimp securely using
recommended hex size and crimp tool.
Cable Group
RG-179
RG-179 DS
RG-179
RG-179 DS
RG-179
RG-179 DS
BELDEN 735A
Part No.
133-8433-001
133-8434-001
133-8333-001
133-8334-001
133-8333-401
133-8334-401
133-8445-001
Crimp Hex
.128 (3.25)
.151 (3.83)
.128 (3.25)
.151 (3.83)
.128 (3.25)
.151 (3.83)
.151 (3.83)
229
Cinch Connectivity Solutions Waseca
299 Johnson Avenue SW, Suite 100
Waseca, MN 56093 USA
© 2017 Cinch Connectors, Inc.
+1 507.833.8822
inquiry@cinch.com
cinch.com
ccsjai 02.17