3432-D002,3432-D002 pdf中文资料,3432-D002引脚图,3432-D002电路-Datasheet-电子工程世界

文档预览

™

Three-Wall Condo Header

.100 × .100 Right Angle

• Stacked pins conserve space on the circuit board allowing

higher density packaging

• Pin quantity to 128 gives design flexibility with latching

• “HDI’’ alternative

• Three-wall fits in VME board stacking criteria

• Accepts standard IDC sockets

• Mates with standard flat cable harnesses

• Optional high temperature insulator suitable for “no lead”

soldering operations

• High temperature option suitable for reflow soldering using

“paste in hole” techniques

• RoHS Compliant. See the Regulatory Information

Appendix (RIA) in the “RoHS compliance” section of

www.3Mconnectors.com for compliance information

(RIA E1 & C1 apply)

Date Modified: October 15, 2013

TS-0773-H

Sheet 1 of 3

3000 Series

Physical

Insulation:

Flammability: UL 94V-0

Material: Glass Filled Polyester (PBT), Glass Filled Polyester (PCT) - High Temp Option

Color: Gray (PBT), Black (PCT)

Contact:

Underplating: 100 μ” [ 2.54 μm ] Nickel - Overall

Wiping Area: 30 μ” [ 0.76 μm ] Gold

Solder Tails: 200 μ” [ 5.08 μm ] Tin Lead or Matte Tin (See Ordering Information)

Plating:

Material: Copper Alloy

Marking:

3M Logo, Part Identification Number and Orientation Triangle

Electrical

Current Rating:

2 A (EIA 364-70)

Insulation Resistance:

>1 × 10

at 500 V

Withstanding Voltage:

1,000 V

RMS

at Sea Level

Environmental

Temperature Rating:

-55°C to +105°C

Process Rating:

260°C (High Temp. PCT insulator) single pass (per J-STD-020C)

Moisture Sensitivity Level:

1 (per J-STD-020C) High Temp. (PCT) versions only

UL File No.: E68080

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnectors.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

PBT gray insulator, maximum insulator temperature 191°C (solder

wave process only)

™

Three-Wall Condo Header

.100 × .100 Right Angle

-D00X

Header without Latch

Ejector

-D20X

Header with Short Ejector/Latch for

3M Sockets without Strain Relief

3000 Series

-D30X

Header with Long Ejector/Latch for

3M Sockets with Strain Relief

.08 [2.0]

.68

[17.3]

.424 ± .010

[10.77]

1.18 Ref [30.0]

.573 ± .010

[14.55]

1.28 Ref

[32.5]

.37 Ref [9.4]

.46 Ref

[11.7]

.100

2.54

.020

0.51

REF.

.28

7.1

.590

14.99

POSITION #1

.100

2.54

REF.

.100

2.54

REF.

Position 1

Orientation

Triangle

Notch B

(See Table 1)

Notch C

(See Table 1 & Note 1)

.16 [4.1]

.020 [0.51]

Notch A

(See Table 1 & Note 1)

.24 [6.1]

.025 Sq Typ

[0.64]

.89

[22.61]

.51

[13.0]

.100 [2.54]

REF.

Dim E

.035 [0.89]

2X ø.100

[2.54]

.20 [5.1]

TS-0773-H

Sheet 2 of 4

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnectors.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

™

Three-Wall Condo Header

.100 × .100 Right Angle

Quantity

100

120

128

3000 Series

Table 2

Number Suffix

-XX02

-XX03

Table 1

3M Part

Number

3793

3314

3408

3428

3627

3429

3440

3431

3432

3433

3372

3764

Dimensions

1.26 (32.1)

1.46 (37.2)

1.56 (39.7)

1.76 (44.8)

1.96 (49.8)

2.06 (52.4)

2.26 (57.4)

2.46 (62.6)

2.76 (70.2)

3.26 (82.9)

3.76 (95.6)

3.96 (100.7)

0.865 (21.97)

1.065 (27.05)

1.165 (29.59)

1.365 (34.67)

1.565 (39.75)

1.665 (42.29)

1.865 (47.37)

2.065 (52.45)

2.365 (60.07)

2.865 (72.77)

3.365 (85.47)

3.565 (90.55)

0.71 (18.0)

0.91 (23.1)

1.01 (25.6)

1.21 (30.7)

1.41 (35.8)

1.51 (38.3)

1.71 (43.4)

1.91 (48.5)

2.21 (56.1)

2.71 (68.8)

3.21 (81.5)

3.41 (86.6)

Polarizing

Notches

ABC

Contact Tail

Dim E ± .010

0.112 [2.84]

0.155 [3.94]

.232

[5.89]

.029 Typ

[0.74]

ø .116

[2.95]

.100 Typ

[2.54]

Position 1

.100 Typ

[2.54]

ø.040

.003

[ 1.02 ]

(After Plating)

Recommended Hole Pattern

Notes:

1. Notches A & C will accomodate 3M Polarizing Key (3M Part Number 3518 or N3518).

2. 112 [2.84] tail length suitable for .062 [1.57] thick pc board.

3. Contact your 3M sales representative for custom requirements.

4. Use of snap-in style latch/ejectors in either short (X3XXX-D502XX) or X3XXX-D602XX) styles, installed or shipped

separately (-5 & -6 snap-in latches are dimensionally and functionally equivalent to -2 & -3 roll pin latches)

5. Mounting hardware: From solder side of pc board use #4-*24 thread cutting screw (3M Part 3341-5) and .116 dia. mounting hole. See Illustrations on

page 4.

Inch

(mm)

If ordering Snap-In style latches separately, please use the below chart

Tolerance Unless Noted

Short Latch

High Temp (PBT)

High Temp (PPA)

3505-30

N3505-30B

Long Latch

3505-31

N3505-31B

Color

Gray

Black

Inch

.00

.000

.01

.005

[ ] Dimensions for

Reference only

Ordering Information

X3XXX - DXXXXX

N = High Temp Black (PCT) (RB Plating Req’d)

Blank = Std. Temp Gray (PBT) (Blank or UB Pltg. Req’d.)

3M Part Number

Latch/Ejector System

0 = No Latch/Ejector Installed

2 = Short, Roll Pin Latch/Ejectors

3 = Long, Roll Pin Latch/Ejectors

Tail

02 = Solder Tail for .062 [1.57] Thick Board

03 = Solder Tail for .094 to .125 [2.39 to 3.18] Thick Board

RB = 30μ” [0.76μm] Gold with Matte Tin Tails (App. E1 & C1 Apply)

Blank or UB = 30μ” [0.76μm] Gold with Tin Lead Tails (App. E3 & C2 Apply)

TS-0773-H

Sheet 3 of 4

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnectors.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

™

Three-Wall Condo Header

.100 × .100 Right Angle

Polarizing Post

.318

[8.08]

.100 Dia

[2.54]

Note: Insert Post into one mounting hardware hole on

bottom of header. Set post to protrude .115” [2.92]

3000 Series

3 2 0 1 -4

3 2 0 1 -5

LCP

PBT

B la c k

G ra y

Polarizing Keys

Dim A

N3518

3518

LCP

PBT

Blac k

Gray

.02

Breakaway Tab

.34 Ref

[8.6]

.15

[3.8]

.09

[2.3]

Note: #2216 B/A Scotchweld can be used to adhere keys.

Mounting Hardware

3341-5

(Installed from bottom of board)

3341-6

(Must be inserted prior to latch on

vertical headers)

.31

[7.9]

.50

[12.7]

Panhead Thread Cutting Screw:

#4-24 X 5/16”

Type: USA Std BT, Federal BG

Hex Head Bolt, Nut and Washer

Bolt - #2-56 X 1/2”

3341-5 & 6

Material - Stainless Steel

TS-0773-H

Sheet 4 of 4

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnectors.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M is a trademark of 3M Company.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness

is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated

with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order

shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.

3M MAKES NO OTHER WARRANTIES

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

If this product is defective within the

warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.

Except

where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of

the legal theory asserted.

3M Electronics Solutions Division

6801 River Place Blvd.

Austin, TX 78726-9000

U.S.A.

1-800-225-5373

www.3Mconnectors.com

Please recycle. Printed in USA.

RIA-2217B-E