Cyclone V Device Datasheet
December 2013
CV-51002-3.7
CV-51002-3.7
Datasheet
This datasheet describes the electrical characteristics, switching characteristics,
configuration specifications, and I/O timing for Cyclone
®
V devices.
Cyclone V devices are offered in commercial and industrial grades. Commercial
devices are offered in –C6 (fastest), –C7, and –C8 speed grades. Industrial devices are
offered in the –I7 speed grade. Automotive devices are offered in the –A7 speed
grade.
f
For more information about the densities and packages of devices in the Cyclone V
family, refer to the
Cyclone V Device Overview.
Electrical Characteristics
The following sections describe the electrical characteristics of Cyclone V devices.
Operating Conditions
Cyclone V devices are rated according to a set of defined parameters. To maintain the
highest possible performance and reliability of the Cyclone V devices, you must
consider the operating requirements described in this datasheet.
101 Innovation Drive
San Jose, CA 95134
www.altera.com
© 2013 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS,
QUARTUS and STRATIX words and logos are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark
Office and in other countries. All other words and logos identified as trademarks or service marks are the property of their
respective holders as described at
www.altera.com/common/legal.html.
Altera warrants performance of its semiconductor
products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use
of any information, product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are
advised to obtain the latest version of device specifications before relying on any published information and before placing orders
for products or services.
ISO
9001:2008
Registered
December 2013 Altera Corporation
Feedback Subscribe
Page 2
Electrical Characteristics
Absolute Maximum Ratings
Absolute maximum ratings define the maximum operating conditions for Cyclone V
devices. The values are based on experiments conducted with the devices and
theoretical modeling of breakdown and damage mechanisms.
The functional operation of the device is not implied for these conditions.
c
Conditions other than those listed in
Table 1
may cause permanent damage to the
device. Additionally, device operation at the absolute maximum ratings for extended
periods of time may have adverse effects on the device.
Table 1
lists the Cyclone V absolute maximum ratings.
Table 1. Absolute Maximum Ratings for Cyclone V Devices
Symbol
V
CC
V
CCPGM
V
CC_AUX
V
CCBAT
V
CCPD
V
CCIO
V
CCA_FPLL
V
CCH_GXB
V
CCE_GXB
V
CCL_GXB
V
I
V
CC_HPS
V
CCPD_HPS
V
CCIO_HPS
V
CCPLL_HPS
I
OUT
T
J
T
STG
Description
Core voltage and periphery circuitry power supply
Configuration pins power supply
Auxiliary supply
Battery back-up power supply for design security volatile key register
I/O pre-driver power supply
I/O power supply
PLL analog power supply
Transceiver high voltage power
Transceiver power
Transceiver clock network power
DC input voltage
HPS core voltage and periphery circuitry power supply
HPS I/O pre-driver power supply
HPS I/O power supply
HPS PLL analog power supply
DC output current per pin
Operating junction temperature
Storage temperature (No bias)
Minimum
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–25
–55
–65
Maximum
1.43
3.90
3.25
3.90
3.90
3.90
3.25
3.25
1.50
1.50
3.80
1.43
3.90
3.90
3.25
3.25
40
125
150
Unit
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
mA
°C
°C
V
CCRSTCLK_HPS
HPS reset and clock input pins power supply
Cyclone V Device Datasheet
December 2013
Altera Corporation
Electrical Characteristics
Page 3
Maximum Allowed Overshoot and Undershoot Voltage
During transitions, input signals may overshoot to the voltage listed in
Table 2
and
undershoot to -2.0 V for input currents less than 100 mA and periods shorter than
20 ns.
The maximum allowed overshoot duration is specified as a percentage of high time
over the lifetime of the device. A DC signal is equivalent to 100% duty cycle.
For example, a signal that overshoots to 4.00 V can only be at 4.00 V for ~15% over the
lifetime of the device; for a device lifetime of 10 years, this amounts to 1.5 years.
Table 2
lists the maximum allowed input overshoot voltage and the duration of the
overshoot voltage as a percentage of device lifetime.
Table 2. Maximum Allowed Overshoot During Transitions for Cyclone V Devices
Symbol
Description
Condition (V)
3.8
3.85
3.9
3.95
4
4.05
4.1
4.15
Vi (AC)
AC input voltage
4.2
4.25
4.3
4.35
4.4
4.45
4.5
4.55
4.6
Overshoot Duration as % of High Time
100
68
45
28
15
13
11
9
8
7
5.4
3.2
1.9
1.1
0.6
0.4
0.2
Unit
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
December 2013 Altera Corporation
Cyclone V Device Datasheet
Page 4
Electrical Characteristics
Recommended Operating Conditions
Recommended operating conditions are the functional operation limits for the AC
and DC parameters for Cyclone V devices.
Table 3
lists the steady-state voltage values expected from Cyclone V devices. Power
supply ramps must all be strictly monotonic, without plateaus.
Table 3. Recommended Operating Conditions for Cyclone V Devices (Part 1 of 2)
Symbol
Description
Core voltage, periphery circuitry power supply,
transceiver physical coding sublayer (PCS)
power supply, and transceiver PCI Express
®
(PCIe
®
) hard IP digital power supply
Auxiliary supply
I/O pre-driver (3.3 V) power supply
V
CCPD
(1)
I/O pre-driver (3.0 V) power supply
I/O pre-driver (2.5 V) power supply
I/O buffers (3.3 V) power supply
I/O buffers (3.0 V) power supply
I/O buffers (2.5 V) power supply
V
CCIO
I/O buffers (1.8 V) power supply
I/O buffers (1.5 V) power supply
I/O buffers (1.35 V) power supply
I/O buffers (1.25 V) power supply
I/O buffers (1.2 V) power supply
Configuration pins (3.3 V) power supply
V
CCPGM
Configuration pins (3.0 V) power supply
Configuration pins (2.5 V) power supply
Configuration pins (1.8 V) power supply
V
CCA_FPLL
(2)
V
CCBAT
V
I
V
O
T
J
(3)
Condition
Minimum
Typical
Maximum
Unit
V
CC
V
CC_AUX
—
1.07
1.1
1.13
V
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Commercial
Industrial
Automotive
2.375
3.135
2.85
2.375
3.135
2.85
2.375
1.71
1.425
1.283
1.19
1.14
3.135
2.85
2.375
1.71
2.375
1.2
–0.5
0
0
–40
–40
2.5
3.3
3.0
2.5
3.3
3.0
2.5
1.8
1.5
1.35
1.25
1.2
3.3
3.0
2.5
1.8
2.5
—
—
—
—
—
—
2.625
3.465
3.15
2.625
3.465
3.15
2.625
1.89
1.575
1.418
1.31
1.26
3.465
3.15
2.625
1.89
2.625
3.0
3.6
V
CCIO
85
100
125
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
°C
°C
°C
PLL analog voltage regulator power supply
Battery back-up power supply
(For design security volatile key register)
DC input voltage
Output voltage
Operating junction temperature
Cyclone V Device Datasheet
December 2013
Altera Corporation
Electrical Characteristics
Page 5
Table 3. Recommended Operating Conditions for Cyclone V Devices (Part 2 of 2)
Symbol
t
RAMP
(4)
Description
Power supply ramp time
Condition
Standard POR
Fast POR
Minimum
200 µs
200 µs
Typical
—
—
Maximum
100 ms
4 ms
Unit
—
—
Notes to
Table 3:
(1) V
CCPD
must be 2.5 V when V
CCIO
is 2.5, 1.8, 1.5, 1.35, 1.25 or 1.2 V. V
CCPD
must be 3.0 V when V
CCIO
is 3.0 V. V
CCPD
must be 3.3 V when V
CCIO
is 3.3 V.
(2) PLL digital voltage is regulated from V
CCA_FPLL
.
(3) If you do not use the design security feature in Cyclone V devices, connect V
CCBAT
to a 1.5-V, 2.5-V, or 3.0-V power supply. The power-on reset
(POR) circuitry monitors V
CCBAT
. Cyclone V devices do not exit POR if V
CCBAT
is not powered up.
(4) This is also applicable to HPS power supply. For HPS power supply, refer to t
RAMP
specifications for standard POR when HPS_PORSEL = 0 and
t
RAMP
specifications for fast POR when HPS_PORSEL = 1.
Table 4
lists the transceiver power supply recommended operating conditions for
Cyclone V GX, GT, SX, and ST devices.
Table 4. Transceiver Power Supply Operating Conditions for Cyclone V GX, GT, SX, and ST Devices
Symbol
V
CCH_GXBL
V
CCE_GXBL
(1), (2)
V
CCL_GXBL
(1), (2)
Notes to
Table 4:
(1) Altera recommends increasing the V
CCE_GXBL
and V
CCL_GXBL
typical value from 1.1 V to 1.2 V for Cyclone V GT FPGA systems which require full
compliance to the PCIe Gen2 transmit jitter specification. For more information about the maximum full duplex channels recommended in
Cyclone V GT and ST devices under this condition, refer to the
Transceiver Protocol Configurations in Cyclone V Devices
chapter.
(2) Altera recommends increasing the V
CCE_GXBL
and V
CCL_GXBL
typical value from 1.1 V to 1.2 V for full compliance to CPRI transmit jitter
specification at 4.9152 Gbps (Cyclone V GT and ST devices) and 6.144Gbps (Cyclone V GT devices only). For more information about the
maximum full duplex channels recommended in Cyclone V GT devices for CPRI 6.144 Gbps, refer to the
Transceiver Protocol Configurations
in Cyclone V Devices
chapter.
Description
Transceiver high voltage power (left side)
Transmitter and receiver power (left side)
Clock network power (left side)
Minimum
2.375
1.07/1.17
1.07/1.17
Typical
2.5
1.1/1.2
1.1/1.2
Maximum
2.625
1.13/1.23
1.13/1.23
Unit
V
V
V
Table 5
lists the steady-state voltage values expected from Cyclone V
system-on-a-chip (SoC) devices with ARM
®
-based hard processor system (HPS).
Power supply ramps must all be strictly monotonic, without plateaus.
Table 5. HPS Power Supply Operating Conditions for Cyclone V SE, SX, and ST Devices
(1)
(Part 1 of 2)
Symbol
V
CC_HPS
Description
HPS core voltage and periphery circuitry power
supply
HPS I/O pre-driver (3.3 V) power supply
V
CCPD_HPS
(2)
HPS I/O pre-driver (3.0 V) power supply
HPS I/O pre-driver (2.5 V) power supply
HPS I/O buffers (3.3 V) power supply
HPS I/O buffers (3.0 V) power supply
HPS I/O buffers (2.5 V) power supply
V
CCIO_HPS
HPS I/O buffers (1.8 V) power supply
HPS I/O buffers (1.5 V) power supply
HPS I/O buffers (1.35 V) power supply
HPS I/O buffers (1.2 V) power supply
(3)
Minimum
1.07
3.135
2.85
2.375
3.135
2.85
2.375
1.71
1.425
1.283
1.14
Typical
1.1
3.3
3.0
2.5
3.3
3.0
2.5
1.8
1.5
1.35
1.2
Maximum
1.13
3.465
3.15
2.625
3.465
3.15
2.625
1.89
1.575
1.418
1.26
Unit
V
V
V
V
V
V
V
V
V
V
V
December 2013 Altera Corporation
Cyclone V Device Datasheet
