• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
Available
QUICK REFERENCE DATA
DESCRIPTION
Nominal case size
Ø D x L in inches [mm]
Operating temperature
Rated capacitance
range, C
R
VALUE
0.296 x 1.000 [7.518 x 25.40]
to 0.390 x 2.812 [9.906 x 71.425]
-55 °C to +125 °C
0.68 μF to 680 μF
-10 %, +50 %; -10 %, +75 %
7 WV
DC
to 250 WV
DC
RIPPLE CURRENT MULTIPLIERS
TEMPERATURE
AMBIENT TEMPERATURE
+100 °C
+85 °C
+65 °C
FREQUENCY (Hz)
WV
DC
6 to 60
61 to 250
50 TO 60
0.85
0.83
100 TO 120
1.0
1.0
300 TO 400
1.10
1.15
> 100K
1.15
1.20
MULTIPLIERS
1.5
2.0
2.5
Tolerance on C
R
Rated voltage range,
U
R
Termination
Life validation test
2000 h at +125 °C
LOW TEMPERATURE PERFORMANCE
Axial leads
CAP
< 15 % from initial measurement
ESR
< 1.3 x initial specified limit
DCL
< initial specified limit
CAP
< 10 % from initial measurement
ESR
< 1.2 x initial specified limit
DCL
< 2.0 x initial specified limit
CAPACITANCE:
The maximum allowable capacitance change
with temperature from +25 °C shall be in accordance with the
following:
RATED VOLTAGE
AT +125 °C
5 to 15
20 and up
PERCENT CAPACITANCE
CHANGE AT
-55 °C
-30
-25
+85 °C
+15
+15
+125 °C
+20
+20
Shelf life
500 h at +125 °C
DIMENSIONS
in inches [millimeters]
WITH OUTER INSULATION
CASE CODE
DIAMETER
KD
DE
DU
DL
DR
0.297 ± 0.031 [7.54 ± 0.79]
0.390 ± 0.031 [9.92 ± 0.79]
0.390 ± 0.031 [9.92 ± 0.79]
0.390 ± 0.031 [9.92 ± 0.79]
0.390 ± 0.031 [9.92 ± 0.79]
LENGTH
(1)
(max.)
1.000 [25.40]
1.187 [30.16]
1.500 [38.10]
2.187 [55.56]
2.812 [71.42]
TYPICAL WEIGHT (g)
1.90
3.90
4.90
7.00
8.60
Note
(1)
Style 2. For style 5, increase the maximum length by 0.125" [3.18 mm].
Revison: 20-Jul-16
Document Number: 42048
1
For technical questions, contact:
aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
610D
www.vishay.com
Vishay Sprague
DIMENSIONS AND AVAILABLE FORMS
Style
2
Polyester
Sleeve
0.76 (0.03) Typ.
Vent
D
50.8 ± 3.175
(2.0 ± 0.125)
L
50.8 ± 3.175
(2.0 ± 0.125)
Style
5
Rigid Polyester
Sleeve
Vent
Epoxy
D
50.8 ± 3.175
(2.0 ± 0.125)
L
Lead diameter
No. 20 AWG (0.032" [0.813 mm] Dia.)
50.8 ± 3.175
(2.0 ± 0.125)
PART NUMBER INFORMATION
610D
TYPE
476
CAPACITANCE
F
CAPACITANCE
TOLERANCE
F = -10 % / +50 %
G = -10 % / +75 %
007
DC VOLTAGE
RATING
Expressed in volts.
Zeros are used to
precede the voltage
rating (i.e. 007 = 7 V).
KD
CASE
CODE
See table
Dimensions
2
CASE STYLE
Identifies
the series
name.
Expressed in pF. The
first two digits are
significant figures.
The third is the
number of zeros.
2 = polyester sleeve (std.)
5 = polyester sleeve with
resin end seal (required
for exposure to halogenated
cleaning solvents)
Note
• For lead (Pb)-free / RoHS compliant products add suffix “E3” to part number.
Example: 610D105F200KD2E3
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
Revison: 20-Jul-16
Document Number: 42048
2
For technical questions, contact:
aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
