SERIES 621 / 622 D-SUBMINIATURES
0.318 FOOTPRINT RIGHT ANGLE
The Edac Series 621 (Plug) and 622 (Receptacle) D-
Subminiature connectors are one of the most well-known
connector families in the world. These series feature the
standard 0.318 (8.08mm) footprint in the popular D-shell
sizes of 9, 15, 25, 37 and 50 contacts, and can be ordered
with optional ferrite filtering. They will mate with all other
industry-standard D-Sub connectors that are based on EIA
RS232, EIA RS449, and MIL-C-24308 standards. All con-
nectors feature a metal shell for EMI/RFI shielding and
have up to four prong board locks for superior retention to
the printed circuit board. Indents on the plug shell provide
grounding and additional mating retention. Grounding fea-
tures include top or bottom ground plates. All units are a
right angle design with printed circuit contacts.
SPECIFICATIONS
•
•
•
•
•
•
0.109 (2.77mm) contact x 0.112 (2.82mm) row spacing
Ferrite Attenuation: 20dB MIN@30Mhz, 30dB MIN@50MHz
Contact Material: plug brass; receptacle phosphor bronze
Contact Plating: Gold over nickel for the mating area
Shell Material: Nickel-plated steel
Operating Temperature: -55° to +125°
C
•
•
•
•
Current Rating: 5 amperes
Contact Resistance: 10 milliohms maximum
Dielectric Withstanding Voltage: 1000 V AC rms @0asl
Insulation Resistance: 5000 megohms minimum
This series is available worldwide through our
global distribution network. Factory standard
package is 25 pieces per carton.
ORDERING CODE
SAMPLE PART NUMBER:
621-025-260-010
•
•
•
•
621 = Series Number :
Plug with 0.318" footprint. For Receptacle use series 622.
025 = Number of contacts :
025 = 25 pins. Available in 9, 15, 25 or 37 pins (stamped contacts) or with 50
pins (machined contacts)
260 = Contact Style :
260 = gold flash (euro class 3). Other standard plating options include 560 for 10u
gold plate (euro class 2), 660 for 30u gold plate (euro class 1) and 668 for ferrite filtered contacts.
0 = Modification Code :
0 = standard part. A code of 9 indicates that this is a custom product. Edac can
custom manufacture D-Subs to meet any design criteria. This includes unique contact plating, special con-
tact lengths, board mount options, or panel mount hardware, as well as extended body options and alternate
plastics or metals.
1 = Board Mounting Options:
1 = 0.120 (3.05mm) diameter through-hole top ground; 3 = two-prong board
locks for 0.120 (3.05mm) diameter PCB hole (standard for ferrite versions); 4 = four-prong board locks for
0.120 (3.05mm) diameter PCB hole; 9 = surface mount right angle contacts.
0 = Panel Mounting Options :
0 = 4-40 UNC fixed standoff (not available with ferrite option); 1 = 0.125
(3.18mm) diameter through-hole; 2 = 4-40 UNC threaded insert; 3 = 4-40 UNC threaded standoff; 5 = 4-40
UNC threaded standoff and lock washer (not available with ferrite option).
•
•
Copyright © 2004 Edac Inc. All rights reserved
www.edac.net
Sheet D-621A
测试/测量
