812 serial Connector
Amphenol
Part Number: 842812-xxxx-xxxx
-
812 serial IDC Socket connector can
be used where quick connect and
disconnect capability are required,
Termination is fast and simple by
means of IDC technology, Available in
size from 10 to 64 contacts with or
without mild-in center polarizing key,
Strain relief may be added to reduce
strain on cable when removing
connector.
A. FEATURES & BENEFITS :
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
MIL-C-83503, BT224, IEC603-13 and BS9525-F0023 compatible.
.100”x .100”( 2.54mm x 2.54mm ) grid.
One step mass termination with no wire preparation.
Double depth slots for polarization ( except 10 & 14 contact sizes ).
The mold-in CPK ( center polarizing key ) option is available.
The accessories of optional CPK, polarizing plug and strain relief are available.
Selective gold plated contacts.
Various copper alloy options for contact material.
Ribbed cover for correct cable alignment.
Open-end cover for feed-through and daisy-chain application.
CEC ( Close Entry Cover ) to shield the cable end exposure and to prevent any wrong direction
entry.
UL and CSA Approved.
Standard color grey only.
Various packaging options for ease of termination and handling.
Mate with 0.025”square pins male header and Amphenol header of 816, 821 & 822 series
B. SPECIFICATIONS
Physical Characteristics
Insulation Material : glass reinforced polyester, UL flammability rating 94V-0.
Contact Material : Beryllium Copper or Phoshphor Bronze.
Contact Area Plating : Gold over Nickel.
Wire Accomodation : AWG 26 and AWG 28 stranded, or AWG 28 and AWG 30 solid.
Contact Spacing : .100”( 2.54mm ) grid terminates to .050”( 1.27mm ) flat ribbon cable.
Electrical Characteristics
Current Rating : 1 Amp.
Contact Resistance : 50 mΩ Max.
Dielectric Withstanding Voltage : 500Vdc Min. at sea level.
812 series
Insulation Resistance : 5,000 MΩ Min. at 500Vdc.
Mechanical Characteristics
a. 500 cycles for 30 microinches gold plated.
b. 250 cycles for 15 microinches gold plated.
c. 50 cycles for gold flash.
Mating Force : 8 oz max. per contact.
Unmating Force : 2 oz min. per contact.
Contact-Body Retention Force : 8 oz min. per contact.
Environmental Characteristics
Humidity : 95% relative humidity at 40
°C
for 96 hours.
Operating Temperature : -55
°C
to +105
°C
C. APPLICATIONS
♦
♦
♦
♦
♦
D.
OA Equipment
Computer, Peripheral
Testing Equipment
Switching System
Industrial Control
ORDERING INFORMATION
Durability :
Amphenol
812 series
Table I
No. of
Position
10
14
16
20
26
30
34
36
40
50
60
64
Strain Relief 842-800-1206
Grey
Black
-030
-050
-031
-051
-032
-052
-033
-053
-034
-054
-040
-060
-035
-055
-041
-061
-036
-056
-037
-057
-038
-058
-039
-059
DIM A
in ± .004
mm ± .10
0.68
[17.27]
0.88
[22.35]
0.98
[24.89]
1.18
[29.97]
1.48
[37.59]
1.68
[42.67]
1.88
[47.75]
1.98
[50.29]
2.18
[55.37]
2.68
[68.07]
3.18
[80.77]
3.38
[85.85]
Amphenol
DIM B
in ± .004
mm ± .10
0.40
[10.16]
0.60
[15.24]
0.70
[17.78]
0.90
[22.86]
1.20
[30.48]
1.40
[35.56]
1.60
[40.64]
1.70
[43.18]
1.90
[48.26]
2.40
[60.96]
2.90
[73.66]
3.10
[78.74]
Table II - Options Code
02 -
03 -
04 -
05 -
06 -
09 -
12 -
13 -
22 -
33 -
34 -
35 -
43 -
44 -
45 -
Black, No CPK, Open Cover Packed separately (obsoleted)
Grey, No CPK, Close Cover Packed separately
Grey, Mold-in CPK, Close Cover Packed separately
Black, No CPK, Close Cover Packed separately (obsoleted)
Black, Mold-in CPK, Close Cover Packed separately (obsoleted)
Black, No CPK, Open Cover, Pre-latch (obsoleted)
Grey, No CPK, Open Cover Packed separately
Grey, Mold-in CPK, Open Cover Packed separately
Grey, No CPK, Open Cover, Pre-latch
Grey, Mold-in CPK, Open Cover, Pre-latch
Grey, Mold-in CPK, Close Entry Cover on even side
Grey, Mold-in CPK, Close Entry Cover on odd side
Grey, No CPK, Close Entry Cover on odd side
Grey, No CPK, Close Entry Cover on even side
Black, Mold-in CPK, Open Cover, Pre-latch (obsoleted)
Optional black color socket is dis-continued. Only standard grey is available.
812 series
Amphenol
Table III - Plating Code
34 - 30 microinches ( 0.76 microns ) min. gold in mating
area, 100 to 200 microinches ( 2.54 to 5.08 microns )
90/10 tin lead plated in termination area. and 50
microinches ( 1.27 microns ) min. nickel underplated
allover.
18 - 15 microinches ( 0.38 microns ) min. gold in mating
area, 100 to 200 microinches ( 2.54 to 5.08 microns )
90/10 tin lead plated in termination area. and 50
microinches ( 1.27 microns ) min. nickel underplated
allover.
AA - Gold Flash in mating area, 100 to 200 microinches
( 2.54 to 5.08 microns ) 90/10 tin lead plated in
termination area. and 50 microinches ( 1.27 microns )
min. nickel underplated allover.
Title :
Amphenol
812 series connector
Part Number :
812 series
电源技术
