85R3C-R19-A24/R72,85R3C-R19-A24/R72 pdf中文资料,85R3C-R19-A24/R72引脚图,85R3C-R19-A24/R72电路-Datasheet-电子工程世界

文档预览

VE S CO

AV R M

AI SIO PL

LA N IA

BL S NT

Features

■

Metal shaft and bushing

■

Consistent, smooth quality feel

■

Up to 4 sections available

■

Rotary switch option designed

■

RoHS compliant versions available*

for “on-off” function control

81/82 - 5/8 ” Square Single-Turn Panel Control

85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch

Potentiometer Speciﬁcations

Initial Electrical Characteristics

Conductive Plastic Element

Cermet Element

Standard Resistance Range

Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm

Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm

Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %

Independent Linearity .................................................................................±5 % ...................................................... ±5 %

Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum

Effective Electrical Angle ............................................................................(Linear tapers) 240 ° ± 5 °...................... (Linear tapers) 240 ° ± 6 °

(Audio tapers) 225 ° ± 5 ° ...................... (Audio tapers) 225 ° ± 6 °

Contact Resistance Variation .....................................................................±1 % ...................................................... ±1 % or 3 ohms (whichever is greater)

Dielectric Withstanding Voltage (MIL-STD-202, Method 301)

Sea Level ..............................................................................................1,500 VAC minimum .............................. 1,500 VAC minimum

70,000 Feet ..........................................................................................500 VAC minimum ................................. 500 VAC minimum

Insulation Resistance (500 VDC) ................................................................1,000 megohms minimum ..................... 1,000 megohms minimum

Power Rating At 70 °C (Voltage Limited By Power Dissipation or 350 VAC, Whichever Is Less)

+70 °C Single Section Assembly .........................................................(Linear tapers) 0.5 watt .......................... (Linear tapers) 2 watts

(Audio tapers) 0.25 watt ........................ (Audio tapers) 1 watt

+70 °C Multiple Section Assembly.......................................................(Linear tapers) 0.5 watt/section ............. (Linear tapers) 1 watt/section

(Audio tapers) 0.25 watt/section ........... (Audio tapers) 0.5 watt/section

+125 °C ................................................................................................0 watt..................................................... 0 watt

Theoretical Resolution ................................................................................Essentially inﬁnite .................................. Essentially inﬁnite

Environmental Characteristics

Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C

Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C

Temperature Coefﬁcient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C

Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G

Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum

Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum

Shock (Single Section) ...............................................................................30 G ....................................................... 30 G

Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum

Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum

Load Life.....................................................................................................1,000 hours ........................................... 1,000 hours

Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum

Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles

Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum

±10 % TRS max. (whichever is greater)

(Audio taper) ±20 % maximum

Contact Resistance Variation @ 50,000 cycles

(Audio taper) ..................................................................................±3 % ...................................................... ±3 %

(Linear taper) .................................................................................±2 % ...................................................... ±2 %

Moisture Resistance (MIL-STD-202, Method 103, Condition B)

Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)

(D, G, S & T tapers) ±20 % maximum

Insulation Resistance (500 VDC) ..........................................................100 megohms minimum ........................ 100 megohms minimum

IP Rating .....................................................................................................IP 40 ...................................................... IP 40

Mechanical Characteristics

Stop Strength

1/4 ” and 1/8 ” diameter shafts ......................................................................................................................................................... 45.19 N-cm (4 lb.-in.)

7/8 ” length shaft ................................................................................................................................................................................. 22.6 N-cm (2 lb.-in.)

Mechanical Angle ...................................................................................................................................................................................................... 300 ° ±5 °

Torque

Starting and Running Torque (Non-Locking Bushings)

Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)

Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)

Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)

Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)

Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)

Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)

Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum

Weight (Single Section).............................................................................................................................................................................. 21 grams maximum

(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum

Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks

Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.

Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean ﬂux.

Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number

Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum

Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.

For dimensional drawings see pages 3 & 4.

For ordering information see page 5.

NOTE: Model 81/82 performance speciﬁcations do not apply to units subjected to printed circuit board cleaning procedures.

1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.

*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.

Speciﬁcations are subject to change without notice.

Customers should verify actual device performance in their speciﬁc applications

81/82 - 5/8 ” Square Single-Turn Panel Control

85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch

Rotary Switch Speciﬁcations

Initial Electrical Characteristics

Contacts:

DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.

DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)

Power Rating (Resistive Load):

DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz

Contact Resistance (0.1 VDC-10 mA) ..................................................................................................................................................... 10 milliohms nominal

Contact Bounce ................................................................................................................................................................................ 5 milliseconds maximum

Dielectric Withstanding Voltage (MIL-STD-202, Method 301)

Sea Level ............................................................................................................................................................................................. 1500 VAC minimum

Insulation Resistance ....................................................................................................................................................................... 1000 megohms minimum

Environmental Characteristics

Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C

Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C

Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G

(Triple Section) .................................................................................................................................................................................................... 5 G

(Quadruple Section) ........................................................................................................................................................................................... 3 G

Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum

Shock (Dual Section) ......................................................................................................................................................................................................... 20 G

Rotational Life ..................................................................................................................................................................................................... 25,000 cycles

Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)

Moisture Resistance (MIL-STD-202, Method 106, Condition B)

Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum

Insulation Resistance (After 24 Hours @ Room Temperature) (500 VDC) .................................................................................... 100 megohms minimum

Switch Housing Material ................................................................................................................. High temperature, ﬂame retardant, thermosetting plastic

Mechanical Characteristics

Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)

Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)

Detent ..................................................................................................................................................................................................... CW or CCW standard

Actuation Angle ...................................................................................................................................................................................................................25 °

Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay

Terminal Styles .................................................................................................................................................................................................. Solder lug only

Standard Orientation ..............................................................................................................................................................In-line with control terminals

Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard

Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum

NOTE: Model 81/82 performance speciﬁcations do not apply to units subjected to printed circuit board cleaning procedures.

1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.

Speciﬁcations are subject to change without notice.

Customers should verify actual device performance in their speciﬁc applications

81/82 - 5/8 ” Square Single-Turn Panel Control

Product Dimensions

"A" Bushing

3/8 " (9.53 mm) Dia. Plain - Single Shaft

12.7,15.88,19.05,22.23± .79

(1/2, 5/8, 7/8,

1/32)

STANDARD

3/8-32 UNEF

6.35

.03

DIA.

(1/4

1/32)

1.19 WIDE X

SHAFT SLOT

(.047)

1.60+.38/-.00

DEEP

(.063+.015/-.000)

7.92

MIN.

.25

(.312)

° ±5 °

X (.010)

9.53

.13

CHAMFER

(.375

.005)

PILOT DIA.

5.49 OPTIONAL FLAT 16.00 LONG OR 1.52 FROM

(.63)

(.216)

(.06)

17.46

"A" BUSHING END FOR SHAFTS UNDER

(11/16)

"B" Bushing

3/8 " (9.53 mm) Dia. Plain - Single Shaft

15.88

.79

(5/8

1/32)

STANDARD

1.19

SHAFT SLOT

WIDE X

(.047)

1.60 + .38/- .00 DEEP

(.063 +.015/-.000)

6.32

.03

DIA.

(.249

.001)

.25

° ±5 °

CHAMFER (.010)

"C" Bushing

1/4 " (6.35 mm) Dia. Plain - Single Shaft

9.53,12.7,15.88,19.05,22.23

.79

(3/8, 1/2, 5/8, 3/4, 7/8,

1/32)

STANDARD

3.162

.025

DIA.

(.1245

.001)

.79

SHAFT SLOT

WIDE X

(.031)

.79

.25 DEEP

(.031

.010)

.25

° ±5 °

CHAMFER (.010)

9.50

.38

(.375

±.015)

12.70

.13

(.500

.005)

6.35

.13

(.250

.005)

1/4-32 UNEF

3/8-32 UNEF

11.13

(.438)

MIN.

9.53

.13

(.375

.005)

PILOT DIA.

4.45

(.175)

MIN.

6.35

.05

(.250

.002)

PILOT DIA.

2.39

.13 OPTIONAL FLAT 6.35 LONG OR 1.52 FROM

(.094

. 005)

(.250)

14.30 (.06)

"C" BUSHING END FOR SHAFTS UNDER

(9/16)

"E" Bushing

1/4 " (6.35 mm) Dia. Locking - Single Shaft

12.7

.13

(.500

.005)

15.88

.79

(5/8

1/32)

STANDARD

3.18

.03

DIA.

(.125

.001)

10.80

(.425)

MIN.

6.35

.05

(.250

.002)

PILOT DIA.

SHAFT SLOT .78 WIDE X

.78

.03 (.031)

(.031

.001) DEEP

.25

° ±5 °

X (.010)

CHAMFER

"A" Bushing

3/8 " (9.53 mm) Dia. Plain - Concentric Shaft

28.58

.79

(1-1/8

1/32)

STANDARD

9.53

(.375)

6.32

.03

DIA.

(.249

±.001)

3.162

.025

DIA.

(.1245

.001)

"C" Bushing

1/4 " (6.35 mm) Dia. Plain - Concentric Shaft

25.40

.79

1/32)

STANDARD

6.35

(.25)

1.98

.03

DIA.

(.078

.001)

19.05

.79

(3/4

1/32)

STANDARD

15.88

.79

(5/8

1/32)

STANDARD

1/4-32 UNEF

3/8-32 UNEF

1.98

.03

DIA.

TRIPLE CONCENTRIC (.078

.001)

(SPECIAL ORDER)

1/4-32 UNEF

3.162

.025

DIA.

(.1245

.001)

7.47

OUTER SHAFT

DIA. OPERATES SECTION #1 INNER SHAFT

(.249)

3.18

DIA. OPERATES SECTION #2, #3, & #4 ("G" STYLE)

(.125)

OUTER SHAFT 3.18 DIA. OPERATES SECTION #1 INNER SHAFT

(.125)

.078

(1.95) DIA. OPERATES SECTION #2, #3, & #4 ("G" STYLE)

"S" Bushing

10 mm Dia. Locking - Single Shaft

22.00 ± 0.79

(.866 ± .031)

STANDARD

SHAFT SLOT

1.01 ± 0.10

(.040 ± .004)

1.80 ± 0.25

DEEP

WIDE X

(.071 ± .010)

12.50 ± 0.38

(.492 ± .015)

DIMENSIONS:

(INCHES)

CCW

M10 x 0.75-6g

MIN.

10.92

(.430)

6.000 +0.000/-0.075

DIA.

(.236 +.000/-.003)

.25

° ±5 °

CHAMFER (.010)

9.90

PILOT DIA.

(.390)

POTENTIOMETER

Speciﬁcations are subject to change without notice.

Customers should verify actual device performance in their speciﬁc applications

81/82 - 5/8 ” Square Single-Turn Panel Control

Product Dimensions

Dual Unit - PC Pins & J-Hook

26.04

.79

(1.025

.031)

Triple Unit - PC Pins & J-Hook

36.20

1.19

(1.425

.047)

Quad Unit - PC Pins & J-Hook

46.36

1.19

(1.825

.047)

10.16

.38

(.400

.015)

10.16

.38

TYP.

(.400

.015)

10.16

.38

TYP.

(.400

.015)

Model 81/82

Single Unit - PC Pins & J-Hook

15.88

.38

(.625

.015)

11.94

(.470)

9.58

.38

(.377

.015)

15.88

.38

(.625

.015)

Model 81

Suggested PC Board Layout - PC Pins

(Single-Shaft Style Bottom View)

5.08

.13

(.200

.005)

1.14

DIA.

(.045)

Shaft Flat Orientation*

120

° ±

CCW END

15.88

.41

(.625

.016)

1 2 3

FLATTED SHAFT

12.7

(.50)

5.97

.38

(.235

.015)

5.08

.38

(.200

.015)

5.33

.76

(.210

.03)

10.16

.13

(.400

.005)

5.08

.13

(.200

.005)

° ±5 °

3.81

MAX. 3 PLCS.

(.150)

.81

DIA.

(.032)

5.08

.38

(.200

.015)

Terminal outlines shown as solid lines represent PC Pins, available

on Model 81. Dashed line terminal outline represents "J" Hook,

available on Model 82.

Note: For units with dual concentric shaft styles, a

2.54 (.100) spacer is added between the module(s) driven

by the outer shaft and those driven by the inner shaft.

For G, K, or V shafts, add the spacer between

modules 1 and 2. For L or M shafts, add the spacer

between modules 2 and 3. For N or P shafts, add the

spacer between modules 3 and 4.

SLOTTED SHAFT

*EXCLUDES MODELS 83 AND 84

DIMENSIONS:

(INCHES)

Speciﬁcations are subject to change without notice.

Customers should verify actual device performance in their speciﬁc applications

85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch

Product Dimensions

Primary Potentiometer Module

Model 85/86

14.53

(.572)

Secondary Potentiometer Module

Model 85/86

10.16

(.400)

15.88

(.625)

15.88

(.625)

Shaft Flat Orientation*

° ±

9.58

.38

(.377

.015)

120

° ±

CCW END

12.7

(.50)

FLATTED SHAFT

1.60

5.08 (.063)

(.200)

5.08

(.200)

5.08

(.200) 8.56

(.337)

5.97

(.235)

8.56

(.337)

SLOTTED SHAFT

*EXCLUDES MODELS 83 AND 84

Switch Module

Model 85/86

REAR

PLATE

COVER

2.77

(.109)

1.35

(.053)

2.29

(.090)

TYP.

6 PLACES

Assembly Sequence

Model 85/86

Secondary Potentiometer Module

15.88

(.625)

REF.

18.42

(.725)

2.41

1.14

(.095)L X (.045)W

SLOT TYP. 6 PLACES

2.92

(.115)

9.53

(.375)

REAR

COVER

PLATE

SWITCH

MODULE

PRIMARY

POTENTIOMETER

MODULE

NOTE: Switch terminals shown in vertical position.

DPST (NO/NC)

(TYPES 50, 51, 56, 57)

DPST (NC/NC)

(TYPES 54, 55, 60, 61)

DPST (NO/NO)

(TYPES 52, 53, 58, 59)

DPDT (NC/NC)

(TYPES 70, 71, 72, 73)

Switch contacts shown in detent position.

Locating Lug Options - All Model 80 Series

.46

(.018)

7.75

(.305)

E = 2.36

.76

(.093

.03)

H & J = 1.98

.41

(.078

.016)

13.49

(.531)

9.53

(.375)

11.10

(.437)

.79

.41

(.031

.016)

2.31

(.091)

3.18

(.125)

2.36

(.093)

3.18

(.125)

DIMENSIONS:

NOTE: "D" OPTION - NO A/R LUG. OTHER LOCATING LUG OPTIONS AVAILABLE. FOR DETAILS CONSULT FACTORY.

(INCHES)

.XX

.38

(.015)

ANGLE

5 %

.127

TOLERANCES EXCEPT AS SHOWN: DECIMAL .XXX

(.005)

Speciﬁcations are subject to change without notice.

Customers should verify actual device performance in their speciﬁc applications

51单片机35个实验教程+源程序代码: 51单片机实验教程+源程序代码，初学者必备，从入门到提高。有注释有讲解，好不好看了就知道. 51...; 86539325 51单片机

keil编译出错: SNAKE.C(205): error C249: \'DATA\': SEGMENT TOO LA...; 245016767 嵌入式系统

深圳新浩斯招人: 现在招人还真不容易啊。。。在eeworld借个版面，看看能不能招到人吧~~ 熟手要求 1.精通C/...; Jamie 嵌入式系统

如何将机器上拷贝下来的文件放在WINCE EMULATOR上执行？: 大家好，本人近日从FANUC 注塑机的CF卡中将该机的系统文件，应用软件全部通过USB转接口的办法 ...; 卖蛋筒 WindowsCE

ADA4870arrz使用: 求助！我用ADA4870 在做放大的电路，输入1.5MHZ 1V的正弦波，输出的信号为什么只是抬升了...; rainnnn 模拟电子

求助: 这是写usb驱动，？？？？？？的一行该怎么写 int installDev() { DevD...; kwyxp 嵌入式系统

是德科技为多发射器信号仿真推出经济高效的参考解决方案

新闻要点：仿真真实动态的雷达对抗发射机信号环境，同时仿真数千台发射机和每秒多达数百万的脉冲在多变的信号环境下进行到达角（AoA）测量，发现并分类实时雷达对抗发射信号利用 Signal Studio软件，快速、轻松建立复杂AoA信号情景 2016 年 3 月 18 日，北京――是德科技公司（NYSE: KEYS）近日宣布，推出一款经济高效的参考解决方案――多发射机场景仿真...[详细]
封闭全国，意大利新冠肺炎病例激增！

北京时间10日消息，意大利总理孔蒂周一宣布，将此前对伦巴第大区及北部14个省的封城措施扩大至整个国家，因为意大利新冠肺炎病例激增。意大利的新冠肺炎死亡病例周一激增97例，至463例。全国确诊病例激增1807例，累计确诊病例总数达到至少9172例，这是自2月21日意大利首次发现确诊病例以来的最大单日增幅。在周一的电视讲话中，孔蒂表示，意大利的风俗习惯必须改变，防止病毒传播的最好办法是人们呆在家...[详细]
视觉 AI 解决方案技术讲解之 3D 视觉

广告摘要声明广告从手机解锁、支付消费到工厂的生产应用，3D 视觉已经深入到生活的方方面面。那到底什么是3D 视觉。它在仙工智能视觉 AI 解决方案中又扮演着什么角色？一文带你看懂 3D 视觉！ 01.3D视觉与2D视觉的技术差异 3D 视觉与 2D视觉技术的最大区别在于处理的数据类型不同。在 3D 视觉领域，被处理的对象通常是依靠 3D 传感器采集到的三维点云数据，而 2D 视觉技术主要...[详细]
段寄存器的引用

段寄存器是因为对内存的分段管理而设置的。16位CPU有四个段寄存器，所以，其程序可同时访问四个不同含义的段。段寄存器及其偏移量的引用关系如图所示。段寄存器CS指向存放程序的内存段，IP是用来存放下条待执行的指令在该段的偏移量，把它们合在一起可在该内存段内取到下次要执行的指令。段寄存器SS指向用于堆栈的内存段，SP是用来指向该堆栈的栈顶，把它们合在一起可访问栈顶单元。另外，当偏移量用到了指...[详细]
【维科杯】柴孚机器人总经理淘才江参评“维科杯·OFweek 2023中国机器人行业年度风云人物奖”

维科杯· OFweek 2023中国机器人行业年度评选（简称OFweek Robot Awards 2023），是由中国高科技行业门户OFweek维科网及旗下权威的机器人专业媒体-OFweek维科网·机器人共同举办。该评选是中国机器人行业内的一大品牌盛会，亦是高科技行业具有专业性、影响力的评选之一。此次活动旨在为机器人行业的产品、技术和企业搭建品牌传播展示平台，并借助OFweek平台资源及...[详细]
大陆启动新一波扶持计划台半导体首当其冲

中国大陆半导体产业将更形壮大。大陆政府即将于今年下半年，启动另一波大规模的半导体产业扶持计划，预计投资金额将高达人民币1,200亿元，超越过去10年总投资金额，藉此帮助规模较大且拥有技术实力的本土IC企业持续扩张，恐将冲击台湾半导体产业，特别是对二线半导体业者的影响，将更为显著。　　拓墣产业研究所所长杨胜帆表示，中国大陆政府对半导体产业的支持，主要系透过产业基金的方式来实现；产业发展基金...[详细]
ASML光刻设备技术服务基地签约落户无锡

5月14日，阿斯麦（ASML）与无锡高新区举行了阿斯麦光刻设备技术服务（无锡）基地签约仪式。据悉，阿斯麦（ASML）光刻设备技术服务（无锡）基地涵盖两大业务板块，包括：拥有近200人规模专业团队的技术中心，从事光刻设备的维护、升级等技术服务；供应链服务中心，为客户提供高效的供应链服务，为设备安装，升级及生产运营等所需的物料提供更高水准的物流支持。无锡高新区在线消息显示，此次双方携手升级打...[详细]
Intersil推出针对应用处理器、GPU等的最小尺寸和最高效率PMIC

高度集成的ISL91211为智能手机、IoT设备以及其他在空间和功率上受限的系统提供91%的效率，并缩小解决方案尺寸达40% 全球领先的半导体解决方案供应商瑞萨电子株式会社（TSE: 6723）子公司Intersil今天宣布，推出一款用于应用处理器、GPU、FPGA和高性能系统电源的高度集成且可编程电源管理IC（PMIC）-- ISL91211，在1.1V输出电压下效率可达91%。该新型P...[详细]
工业机器人厂商是如何在汽车产业中取得成功的

作为生产车间的必需品，工业机器人与国家制造业发展息息相关。伴随中国经济纵深发展，国产工业机器人厂商也如雨后春笋般破土而出。庞大的汽车工业，就是国内工业机器人厂商的成长沃土。埃夫特、瑞松科技、江苏北人等专注于汽车及零部件制造领域的本土工业机器人厂商从幕后走向台前，希望借力资本市场，拓展更大发展空间，不过，市场沃土仍需尖端技术“开垦”。中国工业机器人厂商毕竟“迟到”了几十年，技术水平还难...[详细]
意法半导体推出全新MDmesh MOSFET，提高功率密度和能效

2022 年 5 月 18日，中国 – 意法半导体的 STPOWER MDmesh M9和DM9硅基N沟道超结多漏极功率MOSFET晶体管非常适用于设计数据中心服务器、5G基础设施、平板电视机的开关式电源 (SMPS)。首批上市的两款器件是 650V STP65N045M9和600V STP60N043DM9 。两款产品的单位面积导通电阻(RDS(on))都非常低，可以极大程度提高功率密...[详细]
MORAI将展示逼真的自动驾驶仿真器MORAI SIM Drive

据外媒报道，韩国全栈自动驾驶汽车仿真技术开发商MORAI宣布将在2022年新加坡通讯展览会（CommunicAsia 2022）展示其逼真的自动驾驶汽车驾驶仿真器MORAI SIM Drive。图片来源：MORAI MORAI为自动驾驶汽车和自动驾驶系统构建仿真工具和解决方案。MORAI SIM Drive可以验证自动驾驶汽车，并提供与现实世界相同的仿真环境、传感器和车辆模型。凭...[详细]
国产车如何在竞争中破局？“智能化”才是逆袭的关键？

这个国庆假期，你是开什么车出行的？不出意外的话，身边应该有不少朋友开上新能源汽车了吧？乘联会数据显示，9月份中国新能源汽车渗透率有望达到37.9%。那么，国产新能源厂商是怎么做到3年时间里逆袭的？智能化应该是其中的一个重要原因，随着时间的推移，它甚至有可能成为国产车实现逆袭的一个关键原因。为什么这么说呢？今天就通过3个问题来聊聊！ 1，什么是智能化？在很多...[详细]
韩国自中国进口动力电池总额不断增加

韩国产业通商资源部近日发布的动力电池进出口数据显示，韩国2023年1月至8月动力电池进口总额约62亿美元，韩国三大动力电池企业自中国的进口额占韩国总进口额的77%。根据韩国产业通商资源部的统计数据，韩国动力电池进口额从2021年的36亿美元增至2022年的60亿美元， ... ...[详细]
汽车芯片与零部件供不应求：订单排到2023年下半年

据DIGITIMES报道，在供应链的最新消息中，汽车的微控制单元和微处理器芯片需求依旧高涨，包括OSAT和封装材料在内的相关核心零部件供应商，至2023年已有明确的订单，但具体市场需求情况尚不明朗。得益于智能电车的快速发展，以IGBT模块、功率集成模块和功率mosfet为主的功率半导体价值也在不断攀升，例如意法半导体提供的MCU芯片获得了大量车企的钟爱。据最新的供应链消息，部分领先的OSA...[详细]
联发科市场研究部门延揽前台积大将

亚洲手机芯片龙头联发科（2454）昨（16）日宣布成立市场研究部门，并任命曾于晶圆代工龙头台积电任职超过17年的王硕仁担任该部门总经理，为公司长期策略献策。在短期营运基本面部分，虽然大陆十一长假前的备货潮已至，但目前看来，手机客户端拉货力道平平，联发科内部也看淡本月的业绩成长动能，法人预期，联发科9月营收可能与8月持平或略低，整体第3季营收仍可望超越财测高标。近期频频扩增外籍营销团队的联...[详细]