86E2B-E20-G15/R59,86E2B-E20-G15/R59 pdf中文资料,86E2B-E20-G15/R59引脚图,86E2B-E20-G15/R59电路-Datasheet-电子工程世界

文档预览

VE S CO

AV R M

AI SIO PL

LA N IA

BL S NT

Features

■

Metal shaft and bushing

■

Consistent, smooth quality feel

■

Up to 4 sections available

■

Rotary switch option designed

■

RoHS compliant versions available*

for “on-off” function control

81/82 - 5/8 ” Square Single-Turn Panel Control

85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch

Potentiometer Speciﬁcations

Initial Electrical Characteristics

Conductive Plastic Element

Cermet Element

Standard Resistance Range

Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm

Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm

Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %

Independent Linearity .................................................................................±5 % ...................................................... ±5 %

Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum

Effective Electrical Angle ............................................................................(Linear tapers) 240 ° ± 5 °...................... (Linear tapers) 240 ° ± 6 °

(Audio tapers) 225 ° ± 5 ° ...................... (Audio tapers) 225 ° ± 6 °

Contact Resistance Variation .....................................................................±1 % ...................................................... ±1 % or 3 ohms (whichever is greater)

Dielectric Withstanding Voltage (MIL-STD-202, Method 301)

Sea Level ..............................................................................................1,500 VAC minimum .............................. 1,500 VAC minimum

70,000 Feet ..........................................................................................500 VAC minimum ................................. 500 VAC minimum

Insulation Resistance (500 VDC) ................................................................1,000 megohms minimum ..................... 1,000 megohms minimum

Power Rating At 70 °C (Voltage Limited By Power Dissipation or 350 VAC, Whichever Is Less)

+70 °C Single Section Assembly .........................................................(Linear tapers) 0.5 watt .......................... (Linear tapers) 2 watts

(Audio tapers) 0.25 watt ........................ (Audio tapers) 1 watt

+70 °C Multiple Section Assembly.......................................................(Linear tapers) 0.5 watt/section ............. (Linear tapers) 1 watt/section

(Audio tapers) 0.25 watt/section ........... (Audio tapers) 0.5 watt/section

+125 °C ................................................................................................0 watt..................................................... 0 watt

Theoretical Resolution ................................................................................Essentially inﬁnite .................................. Essentially inﬁnite

Environmental Characteristics

Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C

Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C

Temperature Coefﬁcient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C

Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G

Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum

Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum

Shock (Single Section) ...............................................................................30 G ....................................................... 30 G

Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum

Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum

Load Life.....................................................................................................1,000 hours ........................................... 1,000 hours

Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum

Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles

Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum

±10 % TRS max. (whichever is greater)

(Audio taper) ±20 % maximum

Contact Resistance Variation @ 50,000 cycles

(Audio taper) ..................................................................................±3 % ...................................................... ±3 %

(Linear taper) .................................................................................±2 % ...................................................... ±2 %

Moisture Resistance (MIL-STD-202, Method 103, Condition B)

Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)

(D, G, S & T tapers) ±20 % maximum

Insulation Resistance (500 VDC) ..........................................................100 megohms minimum ........................ 100 megohms minimum

IP Rating .....................................................................................................IP 40 ...................................................... IP 40

Mechanical Characteristics

Stop Strength

1/4 ” and 1/8 ” diameter shafts ......................................................................................................................................................... 45.19 N-cm (4 lb.-in.)

7/8 ” length shaft ................................................................................................................................................................................. 22.6 N-cm (2 lb.-in.)

Mechanical Angle ...................................................................................................................................................................................................... 300 ° ±5 °

Torque

Starting and Running Torque (Non-Locking Bushings)

Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)

Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)

Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)

Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)

Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)

Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)

Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum

Weight (Single Section).............................................................................................................................................................................. 21 grams maximum

(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum

Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks

Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.

Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean ﬂux.

Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number

Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum

Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.

For dimensional drawings see pages 3 & 4.

For ordering information see page 5.

NOTE: Model 81/82 performance speciﬁcations do not apply to units subjected to printed circuit board cleaning procedures.

1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.

*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.

Speciﬁcations are subject to change without notice.

Customers should verify actual device performance in their speciﬁc applications

81/82 - 5/8 ” Square Single-Turn Panel Control

85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch

Rotary Switch Speciﬁcations

Initial Electrical Characteristics

Contacts:

DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.

DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)

Power Rating (Resistive Load):

DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz

Contact Resistance (0.1 VDC-10 mA) ..................................................................................................................................................... 10 milliohms nominal

Contact Bounce ................................................................................................................................................................................ 5 milliseconds maximum

Dielectric Withstanding Voltage (MIL-STD-202, Method 301)

Sea Level ............................................................................................................................................................................................. 1500 VAC minimum

Insulation Resistance ....................................................................................................................................................................... 1000 megohms minimum

Environmental Characteristics

Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C

Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C

Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G

(Triple Section) .................................................................................................................................................................................................... 5 G

(Quadruple Section) ........................................................................................................................................................................................... 3 G

Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum

Shock (Dual Section) ......................................................................................................................................................................................................... 20 G

Rotational Life ..................................................................................................................................................................................................... 25,000 cycles

Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)

Moisture Resistance (MIL-STD-202, Method 106, Condition B)

Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum

Insulation Resistance (After 24 Hours @ Room Temperature) (500 VDC) .................................................................................... 100 megohms minimum

Switch Housing Material ................................................................................................................. High temperature, ﬂame retardant, thermosetting plastic

Mechanical Characteristics

Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)

Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)

Detent ..................................................................................................................................................................................................... CW or CCW standard

Actuation Angle ...................................................................................................................................................................................................................25 °

Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay

Terminal Styles .................................................................................................................................................................................................. Solder lug only

Standard Orientation ..............................................................................................................................................................In-line with control terminals

Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard

Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum

NOTE: Model 81/82 performance speciﬁcations do not apply to units subjected to printed circuit board cleaning procedures.

1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.

Speciﬁcations are subject to change without notice.

Customers should verify actual device performance in their speciﬁc applications

81/82 - 5/8 ” Square Single-Turn Panel Control

Product Dimensions

"A" Bushing

3/8 " (9.53 mm) Dia. Plain - Single Shaft

12.7,15.88,19.05,22.23± .79

(1/2, 5/8, 7/8,

1/32)

STANDARD

3/8-32 UNEF

6.35

.03

DIA.

(1/4

1/32)

1.19 WIDE X

SHAFT SLOT

(.047)

1.60+.38/-.00

DEEP

(.063+.015/-.000)

7.92

MIN.

.25

(.312)

° ±5 °

X (.010)

9.53

.13

CHAMFER

(.375

.005)

PILOT DIA.

5.49 OPTIONAL FLAT 16.00 LONG OR 1.52 FROM

(.63)

(.216)

(.06)

17.46

"A" BUSHING END FOR SHAFTS UNDER

(11/16)

"B" Bushing

3/8 " (9.53 mm) Dia. Plain - Single Shaft

15.88

.79

(5/8

1/32)

STANDARD

1.19

SHAFT SLOT

WIDE X

(.047)

1.60 + .38/- .00 DEEP

(.063 +.015/-.000)

6.32

.03

DIA.

(.249

.001)

.25

° ±5 °

CHAMFER (.010)

"C" Bushing

1/4 " (6.35 mm) Dia. Plain - Single Shaft

9.53,12.7,15.88,19.05,22.23

.79

(3/8, 1/2, 5/8, 3/4, 7/8,

1/32)

STANDARD

3.162

.025

DIA.

(.1245

.001)

.79

SHAFT SLOT

WIDE X

(.031)

.79

.25 DEEP

(.031

.010)

.25

° ±5 °

CHAMFER (.010)

9.50

.38

(.375

±.015)

12.70

.13

(.500

.005)

6.35

.13

(.250

.005)

1/4-32 UNEF

3/8-32 UNEF

11.13

(.438)

MIN.

9.53

.13

(.375

.005)

PILOT DIA.

4.45

(.175)

MIN.

6.35

.05

(.250

.002)

PILOT DIA.

2.39

.13 OPTIONAL FLAT 6.35 LONG OR 1.52 FROM

(.094

. 005)

(.250)

14.30 (.06)

"C" BUSHING END FOR SHAFTS UNDER

(9/16)

"E" Bushing

1/4 " (6.35 mm) Dia. Locking - Single Shaft

12.7

.13

(.500

.005)

15.88

.79

(5/8

1/32)

STANDARD

3.18

.03

DIA.

(.125

.001)

10.80

(.425)

MIN.

6.35

.05

(.250

.002)

PILOT DIA.

SHAFT SLOT .78 WIDE X

.78

.03 (.031)

(.031

.001) DEEP

.25

° ±5 °

X (.010)

CHAMFER

"A" Bushing

3/8 " (9.53 mm) Dia. Plain - Concentric Shaft

28.58

.79

(1-1/8

1/32)

STANDARD

9.53

(.375)

6.32

.03

DIA.

(.249

±.001)

3.162

.025

DIA.

(.1245

.001)

"C" Bushing

1/4 " (6.35 mm) Dia. Plain - Concentric Shaft

25.40

.79

1/32)

STANDARD

6.35

(.25)

1.98

.03

DIA.

(.078

.001)

19.05

.79

(3/4

1/32)

STANDARD

15.88

.79

(5/8

1/32)

STANDARD

1/4-32 UNEF

3/8-32 UNEF

1.98

.03

DIA.

TRIPLE CONCENTRIC (.078

.001)

(SPECIAL ORDER)

1/4-32 UNEF

3.162

.025

DIA.

(.1245

.001)

7.47

OUTER SHAFT

DIA. OPERATES SECTION #1 INNER SHAFT

(.249)

3.18

DIA. OPERATES SECTION #2, #3, & #4 ("G" STYLE)

(.125)

OUTER SHAFT 3.18 DIA. OPERATES SECTION #1 INNER SHAFT

(.125)

.078

(1.95) DIA. OPERATES SECTION #2, #3, & #4 ("G" STYLE)

"S" Bushing

10 mm Dia. Locking - Single Shaft

22.00 ± 0.79

(.866 ± .031)

STANDARD

SHAFT SLOT

1.01 ± 0.10

(.040 ± .004)

1.80 ± 0.25

DEEP

WIDE X

(.071 ± .010)

12.50 ± 0.38

(.492 ± .015)

DIMENSIONS:

(INCHES)

CCW

M10 x 0.75-6g

MIN.

10.92

(.430)

6.000 +0.000/-0.075

DIA.

(.236 +.000/-.003)

.25

° ±5 °

CHAMFER (.010)

9.90

PILOT DIA.

(.390)

POTENTIOMETER

Speciﬁcations are subject to change without notice.

Customers should verify actual device performance in their speciﬁc applications

81/82 - 5/8 ” Square Single-Turn Panel Control

Product Dimensions

Dual Unit - PC Pins & J-Hook

26.04

.79

(1.025

.031)

Triple Unit - PC Pins & J-Hook

36.20

1.19

(1.425

.047)

Quad Unit - PC Pins & J-Hook

46.36

1.19

(1.825

.047)

10.16

.38

(.400

.015)

10.16

.38

TYP.

(.400

.015)

10.16

.38

TYP.

(.400

.015)

Model 81/82

Single Unit - PC Pins & J-Hook

15.88

.38

(.625

.015)

11.94

(.470)

9.58

.38

(.377

.015)

15.88

.38

(.625

.015)

Model 81

Suggested PC Board Layout - PC Pins

(Single-Shaft Style Bottom View)

5.08

.13

(.200

.005)

1.14

DIA.

(.045)

Shaft Flat Orientation*

120

° ±

CCW END

15.88

.41

(.625

.016)

1 2 3

FLATTED SHAFT

12.7

(.50)

5.97

.38

(.235

.015)

5.08

.38

(.200

.015)

5.33

.76

(.210

.03)

10.16

.13

(.400

.005)

5.08

.13

(.200

.005)

° ±5 °

3.81

MAX. 3 PLCS.

(.150)

.81

DIA.

(.032)

5.08

.38

(.200

.015)

Terminal outlines shown as solid lines represent PC Pins, available

on Model 81. Dashed line terminal outline represents "J" Hook,

available on Model 82.

Note: For units with dual concentric shaft styles, a

2.54 (.100) spacer is added between the module(s) driven

by the outer shaft and those driven by the inner shaft.

For G, K, or V shafts, add the spacer between

modules 1 and 2. For L or M shafts, add the spacer

between modules 2 and 3. For N or P shafts, add the

spacer between modules 3 and 4.

SLOTTED SHAFT

*EXCLUDES MODELS 83 AND 84

DIMENSIONS:

(INCHES)

Speciﬁcations are subject to change without notice.

Customers should verify actual device performance in their speciﬁc applications

85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch

Product Dimensions

Primary Potentiometer Module

Model 85/86

14.53

(.572)

Secondary Potentiometer Module

Model 85/86

10.16

(.400)

15.88

(.625)

15.88

(.625)

Shaft Flat Orientation*

° ±

9.58

.38

(.377

.015)

120

° ±

CCW END

12.7

(.50)

FLATTED SHAFT

1.60

5.08 (.063)

(.200)

5.08

(.200)

5.08

(.200) 8.56

(.337)

5.97

(.235)

8.56

(.337)

SLOTTED SHAFT

*EXCLUDES MODELS 83 AND 84

Switch Module

Model 85/86

REAR

PLATE

COVER

2.77

(.109)

1.35

(.053)

2.29

(.090)

TYP.

6 PLACES

Assembly Sequence

Model 85/86

Secondary Potentiometer Module

15.88

(.625)

REF.

18.42

(.725)

2.41

1.14

(.095)L X (.045)W

SLOT TYP. 6 PLACES

2.92

(.115)

9.53

(.375)

REAR

COVER

PLATE

SWITCH

MODULE

PRIMARY

POTENTIOMETER

MODULE

NOTE: Switch terminals shown in vertical position.

DPST (NO/NC)

(TYPES 50, 51, 56, 57)

DPST (NC/NC)

(TYPES 54, 55, 60, 61)

DPST (NO/NO)

(TYPES 52, 53, 58, 59)

DPDT (NC/NC)

(TYPES 70, 71, 72, 73)

Switch contacts shown in detent position.

Locating Lug Options - All Model 80 Series

.46

(.018)

7.75

(.305)

E = 2.36

.76

(.093

.03)

H & J = 1.98

.41

(.078

.016)

13.49

(.531)

9.53

(.375)

11.10

(.437)

.79

.41

(.031

.016)

2.31

(.091)

3.18

(.125)

2.36

(.093)

3.18

(.125)

DIMENSIONS:

NOTE: "D" OPTION - NO A/R LUG. OTHER LOCATING LUG OPTIONS AVAILABLE. FOR DETAILS CONSULT FACTORY.

(INCHES)

.XX

.38

(.015)

ANGLE

5 %

.127

TOLERANCES EXCEPT AS SHOWN: DECIMAL .XXX

(.005)

Speciﬁcations are subject to change without notice.

Customers should verify actual device performance in their speciﬁc applications

【FPGA入门到实战】数字信号处理中浮点数的定点化；源码&答疑: 【FPGA入门到实战】数字信号处理中浮点数的定点化；学员对视频里的知识点不理解的可以在论坛里提...; 尤老师 FPGA/CPLD

DP1拆机图解: 转载自水木，用的是Spartan 3 DP1拆机图解这是什么东东沙发不错，竟然用的是Spart...; 凯哥 FPGA/CPLD

LM393比较器的正反馈通路上接一个39PF的电容有什么用: 本帖最后由 yushengjiexy 于 2014-10-15 12:43 编辑谢谢啦 L...; yushengjiexy 模拟电子

一种用NFC控制的智能水表的设计方案: 介绍一项国家发明授权专利一种一卡通智能控制水表。该专利由郑州乐缘电子科技有限公司申请，并于2...; fish001 微控制器 MCU

DSP的硬件和软件架构问题: DSP的硬件和软件以及系统设计称为DSP的三大部分，我觉得这部分内容还是比较有用的。说...; fish001 DSP 与 ARM 处理器

【米尔瑞芯微RK3568 工业开发板】迷之RTC: ## 前题回顾【米尔瑞芯微RK3568 工业开发板】开箱！【米尔瑞芯微RK3568 ...; 黑屋白巫工控电子

再也不怕忘带钥匙了 10款必看的智能门锁

智能门锁对于很多朋友来说可能还是新鲜玩意儿，同时可能也存在一些不确定性，所以未能迅速成为主流产品。不过，随着产品的不断完善、对智能家居平台的广泛兼容，部分智能门锁还是值得一试的。相对来说，它们更方便，使用形式也更多样化，你和家人不必担心忘带钥匙而无法进入家门。下面，一起来看看目前市场中口碑最好的10款智能门锁。 1. Kwikset Kevo 参考价格：约1500元 ...[详细]
深纺织A重组拟收购TCL集团旗下半导体显示业务

今日晚间，深纺织A和TCL集团发布公告确认，深纺织A拟以发行股份和/或支付现金的方式，购买TCL集团和/或其他方持有的半导体显示业务相关的股权/业务/资产，双方已于10月17日就此签署《重组框架协议》。值得一提的是，深纺织A称，此次重组完成后可能会导致公司实际控制权发生变更。公告显示，双方此次重组的标的资产为TCL集团的半导体显示业务相关资产，标的资产的控股股东为TCL集团。此...[详细]
LCD驱动程序（一）

LCD显示原理：在JZ2440上，想要让LCD显示，需要几个部分1、LCD硬件 2、开发板上的LCD控制器 3、SDRAM内存存放数据FramBuffer 4、可能还需要一个调色板（实际上是一块内存，里面数据可以组成各种颜色）显示原理：在开发板上操作LCD控制器，使得开发板向SDRAM内存里去除数据发送通过LCD数据引脚发送到LCD屏上。具体硬件操作步骤： 1、LCD引脚的连接，根据L...[详细]
如何为温度传感器选择正确的热敏电阻

当面对数以千计的热敏电阻类型时，选型可能会造成相当大的困难。在这篇技术文章中，我将为您介绍选择热敏电阻时需牢记的一些重要参数，尤其是当要在两种常用的用于温度传感的热敏电阻类型（负温度系数NTC热敏电阻或硅基线性热敏电阻）之间做出决定时。NTC热敏电阻由于价格低廉而广泛使用，但在极端温度下提供精度较低。硅基线性热敏电阻可在更宽温度范围内提供更佳性能和更高精度，但通常其价格较高。下文中我们将会介绍，...[详细]
资深工程师讲解：EMC设计之接地技巧

　　几乎每次的培训和交流都会有人问到“老师，有没有一种通用的接地方法可以参考啊？”答案是肯定的：“没有”。那咋办呢，我们总不能像中国的厨师一样，教徒弟炒菜时，用到的配料都是“少许”“颜色微黄”“微焦”等感觉性词语吧，当然不是。为了更好的明了接地的技巧方法，下文中将不再讲究任何的文字技巧，而是一针见血的道出接地问题的本质来。　　接地方式←接地目的←接地的功能，所以采取哪种接地方式，要看地是哪类地...[详细]
采用NuMicro M05132读写接触式IC卡接口电路

　　电路原理：本系统采用NuMicro M05132位微控制器实现与IC卡的接口，负责卡时钟和数据的存储与读取，预留了其他种类IC卡所需要的RST、FUS、PGM等信号，IC卡的插入与拨出是通过IC卡适配插座上的开关来识别，其硬件接口电路图如图所示。N u M i c r o M051系列为ARM C o r t e x - M 0 内核的32位微控制器。Cortex-M0是ARM最新的32...[详细]
PLC和电气的知识要点图解介绍

近些年来，随着Plc的开发，现在plc已经应用到工业自动化控制领域，比如化工厂，大型物流公司、农业灌溉、服装厂各种机器控制都是plc系统。再加上现在人机界面和远程通信能力的发展，使得远程无人自动化控制变得更加简单 Plc采用易于理解的图形语言界面，和面向对象的简单指令编写程序，并且程序里面的符号和平时书本上面表面的符号是一样的，这就更加容易理解，使得学习plc的人更加容易上手，不懂程序的人操...[详细]
国产特斯拉的势头强劲，供应链厂商迎来发展机遇

据悉，2019 年 12 月比亚迪新能源汽车销量出现明显下滑。2019 年全年销售汽车 46.14 万辆，同比下滑 11.39%，相比公司年初制定的 65 万辆销售目标，完成率仅 7 成。从数据可以看出，国内汽车市场景气度下行以及国产特斯拉的强势崛起重创比亚迪的电动车业务，国产特斯拉 Model3 的超预期降价和批量交付，使得所有与特斯拉相关的国内外供应商都备受业界关注。目前，国产特...[详细]
国产首台12英寸晶圆探针台研制成功，摆脱日本垄断

近日，中科院长春光机所旗下长春光华微电子设备工程中心有限公司（光华微电子）宣布研制成功国内首台商用 12 英寸全自动晶圆探针台。公司成立以来，一直致力于高端生产设备的研制工作，在光学、精密机械和计算机控制等方面建立了较强的技术优势。本次研发成功的晶圆探针台产品，是半导体行业重要的检测装备之一，可将参数特性不符合要求的芯片记录下来，在进入后序工序前予以剔除，从而大幅度降低器件的制造成本...[详细]
四川攀枝花100MW/500MWh全钒液流储能电站示范应用项目开工

12月28日上午，国家电投集团四川攀枝花100MW/500MWh全钒液流储能电站示范应用项目开工仪式在钒钛高新区举行，这是攀枝花市贯彻落实党的二十大精神、遵循国家双碳战略谋划、深入实施省委决策部署、保障能源安全取得的又一重要实践成果，标志着攀枝花打造钒电之都、构 ... ...[详细]
ESCORT推出新款联网驾驶员警报系统

据外媒报道，雷达、激光探测和驾驶员感知技术公司ESCORT推出了联网驾驶员警报系统ESCORT MAX 3，具备高级功能，并可访问ESCORT驾驶社区。MAX 3具有较远的检测范围和增强的过滤能力，可识别和验证道路威胁，并及时发送关于警察行动、红灯、超速摄像头位置、道路危险和事故的警报。（图片来源：ESCORT）新的MAX 3以现有的ESCORT产品，如MAX 2和iX为基础，搭载...[详细]
青年汽车的“水氢发动机”究竟是什么原理？

准确的叫法应该是水解制氢铝合金。 5月23日，南阳日报的一则《水氢发动机在南阳下线，市委书记点赞！》报道发出后，旋即引发舆论争议。文章称，“水氢发动机在我市正式下线啦，这意味着车载水可以实时制取氢气，车辆只需加水即可行驶。” 文中所指的水氢发动机系浙江青年汽车集团（下称“青年汽车”）所有。对于这项技术，多位专家向媒体表示，水氢发动机有炒作嫌疑，在技术实现上并不科学。 5月24日下午，青年汽车...[详细]
这款眼镜可以迷惑人脸识别技术

如今住在市区，很多地方都已纳入了摄像头的监控范围。虽然对人们人身财产安全有利，但从另一方面来看，个人隐私的泄露也是不可避免。随着人脸识别技术的进一步发展，人们在公共区域的隐私也岌岌可危，不仅是政府当局的摄像头，一些私人企业也能在自己的摄像头内收集到清晰的人脸图像。下面就随家用电子小编一起来了解一下相关内容吧。这款眼镜可以迷惑人脸识别技术如今住在市区，很多地方都已纳入了摄像头的监控范...[详细]
工业级无人机公司云圣智能完成近1.8亿元B轮融资

近日，超低空、天地一体运营商——云圣智能正式宣布完成近1.8亿元人民币B轮融资。本轮融资由中亿明源基金（苏州工业园区）领投，中小企业发展基金（深圳南山有限合伙）跟投，原股东洪泰基金、蓝驰创投继续超额追加投资，万世资本担任本轮融资的独家财务顾问。云圣智能创办于2017年3月，是一家以人工智能为核心，以四维实景地图、工业无人机、全自动机场、物联网云平台为载体，融合多元载荷，为行业级用户提供“机、网...[详细]
诺基亚CEO：没选Android不后悔现在已是挑战者

昨天，诺基亚CEO埃洛普与一批记者参加了圆桌会议。在会上讨论了一个问题：没有选择Android来替代Symbian系统，埃洛普后悔吗？　　对此，埃洛普的回答是：“我对自己作的决定很满意。几年前，我们担心的问题是一家硬件制造商最终会统治Android，这是一个很大的风险。我们当时怀疑谁会统治它，我们拥有资源、拥有垂直整合，但我们作决定太晚了，这是事实，我们尊重这个事实。当时已经有许多其它企...[详细]