STK600-LCD160
Getting Started Guide
Introduction
The STK600-LCD160 is a breakout board for a 160 segment LCD display. It is used
together with the STK600 and an ATmega MCU w/ LCD driving capabilities.
LCD to STK600 connection
The STK600-LCD160 is connected to the STK600 through a set of 10-pin ribbon cables.
The ATmega devices that only supports 100 segments can also be used, but with a
reduced set of segments on the LCD. The STK600-LCD160 should then be connected to
the STK600 through the four rightmost headers.
a) 160 segments mode
b) 100 segments mode
