Blackhawk
™
USB510W
Wireless JTAG Emulator
TI
Devices: C6000, C5000, C2000, OMAP, DAVINCI, SITARA,
I
TMS470, TMS570, ARM 7/9, ARM Cortex A8/R4/M3, Integra
Compatible Operating Systems:
Windows® 2K, XP, Vista & 7
The Blackhawk USB510W is the first of its kind wireless
JTAG emulator for Texas Instruments DSPs. The USB510W
has an embedded 802.11 wireless transceiver and requires
no hard connection to a PC in order to debug using Code
Composer Studio. The major benefit of this capability is to
completely isolate the PC from the target therefore elimi-
nating the chance for high-voltage damage of test compo-
nents. This protects the target board, PC and emulator
from voltage spikes and the absence of a common ground
plane.
Configuration of the USB510W is accomplished via the USB
port in the same fashion as setting up a wireless router. Or,
the USB510W can be used wirelessly right out of the box
using the default settings suitable for most wifi networks.
And of course, the USB510W can also be used for debug-
ging via the high-speed USB port. The integrated wireless
transceiver chip of the USB510W is capable of supporting
the following wireless protocols and speeds:
802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, & 65 Mbps
802.11ag: 6, 9, 12, 18, 24, 36, 48, & 54 Mbps
802.11b: 1, 2, 5.5, & 11 Mbps
Blackhawk is a recognized leader in providing advanced
JTAG Emulators for Texas Instruments DSPs and the first
company to develop a USB JTAG Emulator for TI TMS320™
DSPs. Our XDS510™-class emulators & controllers provide a
full range of features and benefits with support for a wide-
range of TI DSPs. Blackhawk XDS510-class JTAG Emulators
& Controllers are also compatible with Code Composer Stu-
dio™ Flash-burner utility.
Features
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Wireless 802.11 XDS510™-class Controller
1.8/3.3/5.0 volt device I/O support
Auto-sensing low I/O voltage support
20-pin cTI (compact TI) JTAG Header Connector
Code Composer Studio v3.3 SR2 or later
Bi-Color Status LED (red/green)
Full CCStudio IDE compatibility
Windows® Plug n’ Play Installation
Drivers are provided for Windows® XP, Vista
and Windows 7 including 64-bit support
All driver updates are available for download
free-of-charge from our website
Compatibility with the CCStudio Flashburn
plugin and Blackhawk FlashBurn Utility add-on
Free technical support and web downloads
One Year Warranty
Fully assembled and tested in the US
RoHS Compliant
ABOUT BLACKHAWK
EWA Technologies, Inc. is a major global player in the application of the IEEE
1149.x standards (known as boundary-scan or JTAG) to state-of-the-art products
that will support the design, prototyping and production of the next generation of
complex technology products. EWA Technologies consists of two operating units:
the Blackhawk™ division in Mount Laurel, NJ, and Corelis, Inc. in Cerritos, CA. The
Blackhawk™ division is a leader in providing hardware and software for the rapid
development of digital signal processor-based (DSP) applications for a wide vari-
ety of vertical markets. Blackhawk™ is a Texas Instruments® (TI) DSP Third Party
provider for development hardware, advanced JTAG emulators, Real-Time Oper-
ating Systems, design services and consulting. Blackhawk Emulators are available
from a world wide network of industry resellers and distributors.
System Requirements
▪
PC running Windows® 2000, XP, Vista or 7
▪
CCS v4.2 and later
▪
2.0 GHz or faster Pentium or compatible
▪
USB port
▪
Local CD-ROM drive for installation
▪
1 GB RAM
Part Number: BH-USB-510W
Blackhawk
Emulators
123 Gaither Drive
●
Mt. Laurel, NJ 08054
●
877
-983 -4514
●
www.blackhawk
-dsp.com
877- 983-
www.blackhawk-
©
2011 EWA Technologies, Inc.
Blackhawk is a registered trademark of EWA Technologies, Inc. Other product names used herein are trademarks of their respective companies.
9/2011
