Blackhawk
™
USB560v2
TI
Devices:
C6000, C5000, C2000, OMAP, DAVINCI, SITARA,
I
TMS470, TMS570, ARM 7/9, ARM Cortex A8/R4/M3 and more
Compatible Operating Systems:
Windows® (2000/XP/Vista/7) and
Linux (RedHat/Fedora/Ubuntu/SUSE, etc.) 32 and 64-bit editions
System Trace
for TI Devices
Part Number: BH-USB-560v2
T
he
Blackhawk USB560v2 System Trace Emulator (USB560v2) is
based on the Texas Instruments XDS560v2 JTAG emulator reference
design (XDS560v2). The XDS560v2 design is the next‐generation of
the high‐performance XDS560‐class technology first made available
by Blackhawk with the USB560/LAN560 and XDS560 Trace.
The USB560v2 design includes a bus‐powered, high‐speed USB 2.0
host interface, bi‐color state and activity LEDs and a flexible ribbon‐
ized coax JTAG cable. The compact and portable USB560v2 adds
support for IEEE1149.7 and the system trace module (STM), an inter‐
face on the TI heterogeneous multi‐core (ARM + DSP) devices.
All Blackhawk XDS560v2 models support STM.
The JTAG cable comes with a native MIPI 60 connection and the unit
ships with three (3) pin converters for connection to target boards
with 14‐pin TI, 20‐pin compact TI and 20‐pin ARM headers.
Blackhawk provides a comprehensive debug interface utility, Bh560v2Config, that users can use to search for, setup and test the
USBS560v2. The testing capability of the utility includes both host and target interface options. The Bh560v2Config utility works with
all Blackhawk XDS560v2 models via USB and Ethernet on Windows an Linux platforms.
Blackhawk Advanced JTAG Emulators are available from a world wide next work of industry resellers and distributors.
Standard Features of the Blackhawk USB560v2
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Supports Code Composer Studio v4.2 or later and all Ctools enabled devices
Flexible 8.0 inch JTAG cable with native 60‐pin MIPI HSPT Target Connection
Includes 20‐pin compact TI (cTI), 14‐pin standard TI and 20‐pin ARM Adapters
Supports JTAG 1149.1 and 1149.7
Auto‐Adaptive T‐clock (TCLK) up to 50MHz
Auto Sensing Target voltage range from 1.2v to 4.1v
JTAG Debug Isolation, JTAG loop‐back Modes and Boot Mode EMU0 & EMU1
Supports 1‐4 pin System Trace with 128 Mbytes of System Trace Buffer
Up to 100MHz export clock compliant to MIPI STP
Auto compensating calibration for edge jitter, channel skew and duty cycle
Adaptive receiver for setup/hold times up to 1.5ns
High‐Speed USB 2.0 port @ 480Mbit/sec
Supports Mobile Industry Processor Interface (MIPI)
Supports System Trace Protocol (STP) and High‐speed Parallel Trace (HSPT)
Two (2) bi‐color status, state and activity LEDs
Items Included in the Box
1. USB560v2 System Trace Emulator Pod
with System Trace Coax JTAG Cable
2. Pin Converters (3): TI14, cTI20, and
ARM20 targets
3. USB Cable
4. Quick Start Guide
5. CDROM
6. Warranty and Product Registration
Information
ABOUT BLACKHAWK
EWA Technologies, Inc. is a major global player in
the application of the IEEE 1149.x standards (known
as boundary‐scan or JTAG) to state‐of‐the‐art prod‐
ucts that will support the design, prototyping and
production of the next generation of complex tech‐
nology products. EWA Technologies consists of two
operating units: the Blackhawk™ division in Mount
Laurel, NJ, and Corelis, Inc. in Cerritos, CA. The
Blackhawk™ division is a leader in providing hard‐
ware and software for the rapid development of
digital signal processor‐based (DSP) applications for
a wide variety of vertical markets. Blackhawk™ is a
Texas Instruments® (TI) DSP Third Party provider for
development hardware, advanced JTAG emulators,
Real‐Time Operating Systems, design services and
consulting.
©
2012 EWA Technologies, Inc.
04/2012
JTAG
Emulators
AND DEVELOPMENT TOOLS
AND DEVELOPMENT TOOLS
FOR TEXAS INSTRUMENTS DSP
S
123 Gaither Drive
●
Mt. Laurel, NJ 08054
●
877
-983 -4514
●
www.blackhawk
-dsp.com
877- 983-
www.blackhawk-
Blackhawk is a registered trademark of EWA Technologies, Inc. Other product names used herein are trademarks of their respective companies.
开关电源学习小组
