Aluminum Electrolytic Capacitors
This Series is no longer available for
purchase in the country of Japan.
Radial Lead Type
SU-A (Bi-polar)
Features
● Endurance : 85 ℃ 2000 h
● RoHS compliant
series
Specifications
Category temp. range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor（tan δ)
–40 ℃ to +85 ℃
6.3 V to 50 V
2.2 μF to 6800 μF
±20 % (120 Hz / +20℃)
I ≦ 0.03 CV + 3 (μA) After 5 minutes
Please see the attached characteristics list
After 2000 h application of DC working voltage (1000 h for each polarity) at +85 ℃ ± 2 ℃,
when the capacitors are restored to 20 ℃, the capacitors shall meet the following limits.
Endurance
Capacitance change
Dissipation factor（tan δ)
DC leakage current
Within ±20 % of the initial value
≦ 150 % of the initial limit
Within the initial limit
After storage for 1000 h at +85 ℃ ± 2 ℃ with no voltage applied and then being
Shelf life
stabilized at +20 ℃, capacitors shall meet the limits specified in endurance.
(With voltage treatment)
Frequency correction factor for ripple current
Freq.(Hz)
Capacitance (μF)
2.2 to 6800
50, 60
0.70
120
1.00
1k
1.30
10 k to
1.70
Dimensions
Sleeve
Pressure relief
ø6.3≦
ød±0.05
ø8
ø10 ≦
L*
* L ≦ 16：L±1.0
L ≧ 20：L±2.0
14min.
3min.
øD±0.5
F±0.5
øD±0.5
Unit：mm
øD
ød
F
5.0
0.5
2.0
6.3
0.5
2.5
8.0
0.6
3.5
10.0
0.6
5.0
12.5
0.6
5.0
16.0
0.8
7.5
18.0
0.8
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
28-Feb-20
Aluminum Electrolytic Capacitors (Radial Lead Type)
Characteristics list
Case size
Rated
voltage
(V)
SU-A (Bi-polar) series
Endurance : 85 ℃ 2000 h (1000 h for each polarity)
Capacitance
(±20 %)
(μF)
(½½)
Specification
Ripple
current
Lead
dia.
(ød)
Lead length
(mm)
Min. Packaging
Q'ty (PCS)
Lead space
Straight
Taping
½B
Taping
½i
Part No.
øD
L
*1
tan δ
*2
(mA rms)
Strai-
ght
leads
Taping
6.3
10
16
25
35
330
470
1000
2200
3300
4700
6800
47
100
220
330
470
1000
2200
3300
4700
10
22
33
47
220
330
470
1000
2200
3300
10
22
33
47
100
220
330
470
1000
2200
10
22
33
47
100
220
330
470
8.0
10.0
10.0
12.5
16.0
16.0
18.0
5.0
6.3
8.0
10.0
10.0
12.5
16.0
16.0
18.0
5.0
5.0
5.0
6.3
10.0
10.0
10.0
12.5
16.0
18.0
5.0
5.0
6.3
6.3
8.0
10.0
12.5
12.5
16.0
18.0
5.0
6.3
8.0
8.0
10.0
12.5
12.5
12.5
11.5
12.5
20.0
25.0
25.0
31.5
35.5
11.0
11.2
11.5
16.0
16.0
20.0
25.0
31.5
35.5
11.0
11.0
11.0
11.2
12.5
16.0
20.0
25.0
31.5
35.5
11.0
11.0
11.2
11.2
11.5
16.0
20.0
20.0
25.0
35.5
11.0
11.2
11.5
11.5
16.0
20.0
20.0
25.0
250
310
430
660
760
1170
1450
90
130
200
280
340
470
690
1090
1200
40
60
80
100
260
330
380
560
750
900
45
60
90
110
180
320
350
430
680
900
43
80
100
120
230
360
450
590
0.30
0.30
0.30
0.32
0.34
0.36
0.40
0.25
0.25
0.25
0.25
0.25
0.25
0.27
0.29
0.31
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.22
0.24
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.17
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.5
0.5
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.8
0.8
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.8
0.8
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
3.5
5.0
5.0
5.0
7.5
7.5
7.5
2.0
2.5
3.5
5.0
5.0
5.0
7.5
7.5
7.5
2.0
2.0
2.0
2.5
5.0
5.0
5.0
5.0
7.5
7.5
2.0
2.0
2.5
2.5
3.5
5.0
5.0
5.0
7.5
7.5
2.0
2.5
3.5
3.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
―
―
5.0
5.0
5.0
5.0
5.0
5.0
7.5
―
―
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
―
―
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
―
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
―
―
―
―
―
―
―
2.5
2.5
―
―
―
―
―
―
―
2.5
2.5
2.5
2.5
―
―
―
―
―
―
2.5
2.5
2.5
2.5
―
―
―
―
―
―
2.5
2.5
―
―
―
―
―
―
ECEA0JN331U(
ECEA0JN471X(
ECEA0JN102U(
ECEA0JN222U(
ECEA0JN332U(
ECEA0JN472U
ECEA0JN682U
ECEA1AN470U(
ECEA1AN101X(
ECEA1AN221U(
ECEA1AN331U(
ECEA1AN471U(
ECEA1AN102X(
ECEA1AN222U(
ECEA1AN332U
ECEA1AN472U
ECEA1CN100U(
ECEA1CN220U(
ECEA1CN330U(
ECEA1CN470U(
ECEA1CN221X(
ECEA1CN331U(
ECEA1CN471U(
ECEA1CN102U(
ECEA1CN222U
ECEA1CN332U
ECEA1EN100U(
ECEA1EN220X(
ECEA1EN330U(
ECEA1EN470U(
ECEA1EN101U(
ECEA1EN221U(
ECEA1EN331U(
ECEA1EN471U(
ECEA1EN102U(
ECEA1EN222U
ECEA1VN100U(
ECEA1VN220U(
ECEA1VN330U(
ECEA1VN470U(
ECEA1VN101U(
ECEA1VN221U(
ECEA1VN331U(
ECEA1VN471U(
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
200
200
200
200
100
100
50
200
200
200
200
200
200
100
100
50
200
200
200
200
200
200
200
200
100
50
200
200
200
200
200
200
200
200
100
50
200
200
200
200
200
200
200
200
1000
500
500
500
250
―
―
2000
2000
1000
500
500
500
250
―
―
2000
2000
2000
2000
500
500
500
500
―
―
2000
2000
2000
2000
1000
500
500
500
250
―
2000
2000
1000
1000
500
500
500
500
*1: Ripple current (120 Hz / +85 ℃)
*2: tan δ (120 Hz / +20 ℃)
・ When requesting taped product, please put the letter “B” or “i” between the "( )".
Lead wire pitch ½B=5 mm, 7.5 mm, i=2.5 mm.
・ Please refer to the page of “Taping dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
28-Feb-20
Aluminum Electrolytic Capacitors (Radial Lead Type)
Characteristics list
Case size
Rated
voltage
(V)
SU-A (Bi-polar) series
Endurance : 85 ℃ 2000 h (1000 h for each polarity)
Capacitance
(±20 %)
(μF)
(½½)
Specification
Ripple
current
Lead
dia.
(ød)
Lead length
(mm)
Min. Packaging
Q'ty (PCS)
Lead space
Straight
Taping
½B
Taping
½i
Part No.
øD
L
*1
tan δ
*2
(mA rms)
Strai-
ght
leads
Taping
50
2.2
3.3
4.7
10
22
33
47
100
220
330
470
5.0
5.0
5.0
6.3
8.0
8.0
10.0
10.0
12.5
16.0
16.0
11.0
11.0
11.0
11.2
11.5
11.5
12.5
20.0
25.0
25.0
31.5
18
25
30
50
90
110
140
250
360
450
590
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.8
0.8
2.0
2.0
2.0
2.5
3.5
3.5
5.0
5.0
5.0
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
―
2.5
2.5
2.5
2.5
―
―
―
―
―
―
―
ECEA1HN2R2U(
ECEA1HN3R3U(
ECEA1HN4R7U(
ECEA1HN100U(
ECEA1HN220U(
ECEA1HN330U(
ECEA1HN470U(
ECEA1HN101U(
ECEA1HN221U(
ECEA1HN331U(
ECEA1HN471U
)
)
)
)
)
)
)
)
)
)
200
200
200
200
200
200
200
200
200
100
100
2000
2000
2000
2000
1000
1000
500
500
500
250
―
*1: Ripple current (120 Hz / +85 ℃)
*2: tan δ (120 Hz / +20 ℃)
・ When requesting taped product, please put the letter “B” or “i” between the "( )".
Lead wire pitch ½B=5 mm, 7.5 mm, i=2.5 mm.
・ Please refer to the page of “Taping dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
28-Feb-20
Guidelines and precautions regarding the
technical information and use of our products
described in this online catalog.
■ If you want to use our products described in this online catalog for applications requiring
special qualities or reliability, or for applications where the failure or malfunction of the
products may directly jeopardize human life or potentially cause personal injury
(e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion
equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety
equipment), it is necessary to verify whether the specifications of our products fit to such
applications. Please ensure that you will ask and check with our inquiry desk as to whether
the specifications of our products fit to such applications use before you use our products.
■ The quality and performance of our products as described in this online catalog only apply
to our products when used in isolation. Therefore, please ensure you evaluate and verify
our products under the specific circumstances in which our products are assembled in your
own products and in which our products will actually be used.
■ If you use our products in equipment that requires a high degree of reliability, regardless
of the application, it is recommended that you set up protection circuits and redundancy
circuits in order to ensure safety of your equipment.
■ The products and product specifications described in this online catalog are subject to
change for improvement without prior notice. Therefore, please be sure to request and
confirm the latest product specifications which explain the specifications of our products in
detail, before you finalize the design of your applications, purchase, or use our products.
■ The technical information in this online catalog provides examples of our products'
typical operations and application circuits. We do not guarantee the non-infringement of
third party's intellectual property rights and we do not grant any license, right, or interest
in our intellectual property.
■ If any of our products, product specifications and/or technical information in this online
catalog is to be exported or provided to non-residents, the laws and regulations of the
exporting country, especially with regard to security and export control, shall be observed.
<Regarding the Certificate of Compliance with
the EU RoHS Directive/REACH Regulations>
■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies
depending on the part number or series of our products.
■ When you use the inventory of our products for which it is unclear whether those products
are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the
website inquiry form and contact us.
We do not take any responsibility for the use of our products outside the scope of the
specifications, descriptions, guidelines and precautions described in this online catalog.
28-Feb-20
Notices / Items to be observed
Notices
■ Applicable laws and regulations
・This product complies with the RoHS Directive (Restriction of the use of certain hazardous substances in
electrical and electronic equipment (DIRECTIVE 2011/65/EU and（EU)2015/863)).
・ No Ozone Depleting Chemicals(ODC's), controlled under the Montreal Protocol Agreement, are used in
producing this product.
We do not use PBBs or PBDEs as brominated flame retardants.
・ Export procedure which followed export related regulations, such as foreign exchange and a foreign trade
method, on the occasion of export of this product.
・ These products are not dangerous goods on the transportation as identified by UN(United Nations) numbers
or UN classification.
・ This capacitor is designed to be used for electronics circuits such as audio/visual equipment, home
appliances, computers and other office equipment, optical equipment, measuring equipment.
・ An advanced specification must be signed individually for high-reliability use that might threaten
human life or property due to a malfunction of the capacitor.
・ The technical information in this specification provides examples of our products' typical operations and application
circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant
any license, right, or interest in our intellectual property.
■ Limited applications
■ Intellectual property rights and licenses
Items to be observed
■ For specification
・ This specification guarantees the quality and performance of the product as individual components.
The durability differs depending on the environment and the conditions of usage.
Before use, check and evaluate their compatibility with actual conditions when installed in the products.
When safety requirements cannot be satisfied in your technical examination, inform us immediately.
・ Do not use the products beyond the specifications described in this document.
Install the following systems for a failsafe design to ensure safety if these products are to be used in
equipment where a defect in these products may cause the loss of human life or other signification damage,
such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment,
electric heating appliances, combustion/ gas equipment, rotating rotating equipment, and disaster/crime
prevention equipment.
(1) The system is equipped with a protection circuit and protection device.
(2) The system is equipped with a redundant circuit or other system to prevent an unsafe status in the event
of a single fault.
・ Before using the products, carefully check the effects on their quality and performance, and determined
whether or not they can be used. These products are designed and manufactured for general-purpose and
standard use in general electronic equipment. These products are not intended for use in the following special
conditions.
(1) In liquid, such as Water, Oil, Chemicals, or Organic solvent.
(2) In direct sunlight, outdoors, or in dust.
(3) In vapor, such as dew condensation water of resistive element, or water leakage, salty air, or air with a
high concentration corrosive gas, such as Cl
2
, H
2
S, NH
3
, SO
2
, or NOx.
(4) In an environment where strong static electricity or electromagnetic waves exist.
(5) Mounting or placing heat-generating components or inflammables, such as vinyl-coated wires, near
these products.
(6) Sealing or coating of these products or a printed circuit board on which these products are mounted,
with resin and other material.
(7) Using resolvent, water or water-soluble cleaner for flux cleaning agent after soldering. (In particular,
when using water or a water-soluble cleaning agent, be careful not to leave water residues)
(8) Using in the atmosphere where strays acid or alkaline.
(9) Using in the atmosphere where there are excessive vibration and shock.
(10) Using in the atmosphere where there are low pressure or decompression.
・ Please arrange circuit design for preventing impulse or transitional voltage.
Do not apply voltage, which exceeds the full rated voltage when the capacitors receive impulse voltage,
instantaneous high voltage, high pulse voltage etc.
・ Our products there is a product are using an electrolyte solution. Therefore, misuse can result in rapid
deterioration of characteristics and functions of each product. Electrolyte leakage damages printed circuit and
affects performance, characteristics, and functions of customer system.
13-Dec-19
■ Upon application to products where safety is regarded as important
■ Conditions of use
