EP1300PD-66.600M2,EP1300PD-66.600M2 pdf中文资料,EP1300PD-66.600M2引脚图,EP1300PD-66.600M2电路-Datasheet-电子工程世界

文档预览

EP13

Series

• Programmable Crystal Oscillators

• HCMOS/TTL Output

• +3.3V Supply Voltage

• Tri-State and Power Down Options

• Custom Lead Length & Gull Wing Options

• 14 pin DIP Metal Package

• RoHS Compliant (Pb-free)

EP13

OSCILLATOR

ELECTRICAL SPECIFICATIONS

Frequency Range

Operating Temperature Range

Storage Temperature Range

Supply Voltage (V

)

Input Current

Disable Current (TS Option)

Standby Current (PD Option)

Frequency Tolerance / Stability

Inclusive of all conditions: Calibration Tolerance at 25°C,

Frequency Stability over the Operating Temperature Range,

Supply Voltage Change, Output Load Change, First Year Aging

at 25°C, Shock, and Vibration

Output Voltage Logic High (V

)

Output Voltage Logic Low (V

)

Rise Time / Fall Time

Duty Cycle

Load Drive Capability

Output Control Function

20% to 80% of waveform

at 50% of waveform

at 50% of waveform (<50.000MHz Only)

<50.000MHz

>50.000MHz

Output Control Function Input Voltage

: No Connection or >70% of V

: (TS Option) <20% of V

: (PD Option) <20% of V

Aging (at 25°C)

Start Up Time

RMS Jitter

Peak to Peak Jitter

<12.000MHz

>12.000MHz

<12.000MHz

>12.000MHz

MANUFACTURER

CATEGORY

SERIES

PACKAGE

VOLTAGE

1.000MHz to 106.250MHz

-20°C to 70°C or -40°C to 85°C

-55°C to 125°C

3.3V

±0.3V

28mA Maximum (Unloaded)

16mA Maximum (Pin 1=Ground)

20µA Maximum (Pin 1=Ground)

±100ppm or ±50ppm Maximum

-0.4V

Minimum I

=-8mA

0.4V

Maximum

=+8mA

4 nSeconds Maximum

50 ±10(%) (Standard)

50 ±5(%) (Optional)

30pF Maximum

15pF Maximum

Tri-State

Power Down

Enables Output

Disable Output: High Impedance

Disable Output: Logic Low

±5ppm / year Maximum

10 mSeconds Maximum

50pSec Maximum, 15pSec Typical

13pSec Maximum, 10pSec Typical

500pSec Maximum, 100pSec Typical

100pSec Maximum, 60pSec Typical

CLASS

REV

DATE

ECLIPTEK CORP.

OSCILLATOR

EP13

14 pin DIP

3.3V

OS44

12/05

800-ECLIPTEK www.ecliptek.com for latest revision

Specifications subject to change without notice.

PART NUMBERING GUIDE

EP13 00 ET T TS - 24.000M - CL125

FREQUENCY TOLERANCE / STABILITY

00=±100ppm Maximum

45=±50ppm Maximum

OPERATING TEMP. RANGE

Blank=-20°C to 70°C or ET=-40°C to 85°C

DUTY CYCLE

Blank=50 ±10(%), T=50 ±5(%)

AVAILABLE OPTIONS

Blank=None

CLXXX=Custom Lead Length

G=Full Size Gull Wing

FREQUENCY

OUTPUT CONTROL FUNCTION

TS=Tri-State, PD=Power Down

NOTES

__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

MECHANICAL DIMENSIONS

ALL DIMENSIONS IN MILLIMETERS

Pin 1: Tri-State or Power Down

Pin 7: Ground/Case Ground

Pin 8: Output

Pin 14: Supply Voltage

MARKING SPECIFICATIONS

Line 1: ECLIPTEK

ENVIRONMENTAL/MECHANICAL SPECIFICATIONS

Line 2: EP13 TS

Output Control Function

PD = Power Down

TS = Tri-State Enable High

Characteristic

Fine Leak Test

Gross Leak Test

Mechanical Shock

Vibration

Lead Integrity

Solderability

Temperature Cycling

Resistance to Soldering Heat

Resistance to Solvents

Specification

MIL-STD-883, Method 1014, Condition A

MIL-STD-883, Method 1014, Condition C

MIL-STD-202, Method 213, Condition C

MIL-STD-883, Method 2007, Condition A

MIL-STD-883, Method 2004

MIL-STD-883, Method 2002

MIL-STD-883, Method 1010

MIL-STD-883, Method 210

MIL-STD-883, Method 215

Series Designator

Line 3: XX.XXX M

Frequency in MHz

(5 Digits Maximum + Decimal)

Line 4: XX Y ZZ

Week of Year

Last Digit of Year

Ecliptek Manufacturing Identifier

Note: Pin 1 shall be designated with a dot

MANUFACTURER