Panasonic
Place and Play
Bluetooth
®
Low Energy Module
New Product Introduction
New
PAN1740 Series
REACH
COMPLIANT
RoHS
COMPLIANT
Revolutionizing
Bluetooth
Low Energy with a 5mA Current Consumption in Tx or Rx!
A revolution is underway in Bluetooth Low Energy to dramatically shrink power budgets for battery powered applications.
Panasonic’s “nanopower” family of 2nd generation BLE modules reduces transmit and receive current consumption by
more than 66% when compared to the current generation of BLE devices and nearly a 90% reduction from Bluetooth
Classic devices. Most significant is that these current reductions have been achieved without range reduction, without
Tx power reduction and without changes to the Bluetooth specification.
The
PAN1740 Series
is Panasonic’s next generation “nanopower”
Bluetooth
Low Energy module with reduced form factor,
significantly lower power consumption, embedded BLE stack and profile. Panasonic cost engineering lowers component
count and the application BOM. This single mode
Bluetooth
system-on-chip module is optimized for low power and small size.
The power consumption of only 5mA in Tx or Rx mode allows for the use of coin cell batteries and reduces battery requirements
up to 50% when compared to current generation BLE devices . With a fully shielded case, integrated crystal oscillators and
chip antenna, the 9.0 x 9.5 x 1.8 mm footprint of the
PAN1740 Series
makes it one of the smallest BLE modules available.
The
PAN1740 Series
is qualified to the
Bluetooth
4.0 standard – FCC, IC, CE certifications are pending. Panasonic’s designer
friendly Easy-to-Use (ETU) development kits reduce design efforts and critical time to market.
Features
• Bluetooth Smart® Module
• Tx Current @ 0dBm: 5mA
• Small Footprint: 9 x 9.5 x 1.8mm
• High Sensitivity: -93dbm typ.
• Output Power Up to 0dbm
• Embedded BLE Stack and GATT Profile
• Industrial Temperature Range: -40 to 85
o
C
• Two Internal Crystal Oscillators
• Integrated Antenna
Technical Characteristics
Parameter
Receiver Sensitivity
Output Power
Power Supply
Transmit
Receive
Operating Temperature
Website:
us.panasonic.com/industrial
industrial@us.panasonic.com
1-800-344-2112
Applications
• Consumer Electronics
• Wireless Sensors
• Cable Replacement
• Instrumentation
• Heart Rate Monitors
• Blood Glucose Meters
Value
-93 dBm typ.
+0 dBm typ.
2.35 to 3.3 V
4.9 mA
4.9 mA
-40 to +85°C
Condition
Ideal Signal
@ 50 Ohm Antenna Pin
Single Voltage Operation
GFSK
GFSK
Copyright © 2014 Panasonic Corporation of North America.
All Rights Reserved. Specifications are subject to change without notice.
PAN1740 Series NPI, FY13-134-XXX
Block Diagram
(PAN1740)
Crystal
32.768 kHz
DC/DC
V
S
UPPLY
Full Port Multiplexer
UART SPI USB 12C
GP-ADC
Quad-Decoder
Wakeup Timer
Dialog
DA14580
Crystal
16 MHz
Ordering Information
Part Number
ENW-89846A1KF
EVAL_PAN1740
Description
PAN1740
Bluetooth
Low Energy Module, Integrated Antenna
PAN1740 Evaluation Kit, Two USB Development Modules
Additional Information
For more information on the
PAN1740
Bluetooth
Low Energy Module, visit our blog by clicking on the link below. There, you
can download our new whitepaper, entitled “Moving Forward With Bluetooth Low Energy”.
http://www.pidtechinsights.com/2014/03/11/moving-forward-with-bluetooth-low-energy/
Website:
www.panasonic.com/industrial
industrial@us.panasonic.com
1-800-344-2112
Copyright © 2014 Panasonic Corporation of North America.
All Rights Reserved. Specifications are subject to change without notice.
PAN1740 Series NPI, FY13-134-XXX
