F-219
FFSD–20–S–10.00–01–N
(1.27 mm) .050"
EYE
™
IDC
TIGER
™
FFSD–10–D–02.00–01–N
FFSD SERIES
TIGER EYE FLAT IDC WIRE CABLES
Mates with:
FTS, FTSH, EHF,
SHF, ESHF
TYPE
STRIP
NO. PINS
PER ROW
END
OPTION
OVERALL
LENGTH
01
N
OTHER
OPTION
SPECIFICATIONS
For complete specifications
see www.samtec.com?FFSD
Insulator Material:
PBT
Contact:
BeCu
Plating:
10 µ" (0.25 µm) Au over 50 µ"
(1.27 µm) Ni on contact area;
Sn over 50 µ" (1.27 µm) Ni
on balance
Wire:
30 AWG
Current Rating (FFSD/FTSH):
2.3 A per pin
(2 pins powered)
Operating Temp Range:
-40 °C to +105 °C
Lead Size Accepted:
(0.41 mm) .016" SQ
Insertion Depth:
(2.64 mm) .104" to
(3.17 mm) .125"
RoHS Compliant:
Yes
= Single End
–S
–04, –05,
–06, –08,
–10, –11,
–12, –13,
–15, –17,
–20, –25
(Standard sizes)
= Double End
–D
= Assembled Length
Assembled Length
in INCHES (1/8")
2 inches minimum
–“XX.XX”
= Notch
Polarization
Notch option
(Not available
with -04 position)
–N
RECOGNITIONS
For complete scope of
recognitions see
www.samtec.com/quality
FILE NO. E111594
= Socket Strip
(1.90) .075
01
FFSD
(1.02)
.040
No. of positions x
(1.27) .050 + (4.19) .165
(3.05)
.120
(5.08)
.200
(1.27)
.050
Reverse
–RW
= Wiring
Daisy
–D “XX”
= Chain
–R
= Reverse
Outside
–O
= Reverse
Strain
–SR
= Relief
(Mates only with
ESHF Series)
ALSO AVAILABLE
(MOQ Required)
• Other sizes
(50.8 mm)
2.00
min.
“XX”
±
1/8"
Requires –DXX
3
3
No. of positions x
(1.27) .050 + (8.00) .315
01
(101.60 mm) 4.00 min.
Middle
–M
= Reverse
02
Red wire opposite
position #1.
Requires –DXX
• Strain relief option
3
Not available with
–O, –M, –R or –DXX
Note:
This Series is
non-standard, non-returnable.
1
2
Due to technical progress, all designs, specifications and components are subject to change without notice.
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
WWW.SAMTEC.COM
DIY/开源硬件专区