FHG.0K.303.CLAC50,FHG.0K.303.CLAC50 pdf中文资料,FHG.0K.303.CLAC50引脚图,FHG.0K.303.CLAC50电路-Datasheet-电子工程世界

文档预览

unipole & multipole

connectors

No reproduction or use without express permission of editorial or pictorial content, in any manner.

LEMO reserve the right at all times to modify and improve specifications without any notification.

LEMO unipole and multipole connectors

This catalogue gives the complete description of LEMO unipole and multipole type connectors. The LEMO manufacturing

programme has been extended to almost 40 series divided into 7 product families with specific mating and environmental

characteristics. Each series includes a wide variety of plug, socket, coupler and bridge plug models, available in contact

configurations adapted to all round cables, including up to 114 conductors, and a maximum diameter of 30 mm.

Watertight and vacuumtight models are also available. Since LEMO connectors are perfectly screened and designed to

guarantee very low resistance to shell electrical continuity, they are particularly adapted to applications where electro-

magnetic compatibility (EMC) is important.

Table of Contents

3 steps to select the right connector

................................................................................................................................................................................ 3

B Series (indoor, keyed)

Part Numbering system ........................................................................................................................................................................................ 13

Metal Housing models ........................................................................................................................................................................................... 14

Elbow socket models ............................................................................................................................................................................................. 25

Plastic housing models .......................................................................................................................................................................................... 28

Watertight or vacuumtight models ......................................................................................................................................................................... 30

Bridge models ........................................................................................................................................................................................................ 34

Threaded-latching models ..................................................................................................................................................................................... 35

Alignment Key and Polarized Keying System........................................................................................................................................................ 36

K Series (outdoor, keyed)

Alignment Key and Polarized Keying System........................................................................................................................................................ 49

T Series (outdoor, keyed)

Plastic housing models, alignment Key and Polarized Keying System ................................................................................................................. 56

B, K and T Series

Insert configuration, Housings, Insulators, Contacts, Collets, Variant .................................................................................... 57

S Series (indoor, stepped insert)

E Series (outdoor, stepped insert)

S, and E Series

Insert configuration, Housings, Insulators, Contacts, Collets, Variant ...................................................................................... 103

M Series (outdoor, keyed)..............................................................................................................................................................................................

123

F Series (outdoor, keyed)

.............................................................................................................................................................................................. 125

Spare parts

...................................................................................................................................................................................................................... 127

Accessories

Tooling

Panel cut-outs and PCB drilling pattern

....................................................................................................................................................................... 157

Cable assembly

(B, K, T, S and E series)....................................................................................................................................................................... 169

Technical characteristics...............................................................................................................................................................................................

182

Product safety notice

www.lemo.com

Precision modular connectors to suit your application

Over 75000 connectors

Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull

connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in

more than 80 countries with the help of over 40 subsidiaries and distributors.

The modular design of the LEMO range provides over 75000 connectors from miniature ø 3 mm to ø 50 mm, capable of

handling cable diameters up to 30 mm and for up to 114 contacts.

LEMO’s Push-Pull Self-Latching Connection System

This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in most

markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommuni-

cations and military.

This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolute

security against vibration, shock or pull on the cable, and facilitates operation in a very limited space.

The LEMO self-latching system allows the connector

to be mated by simply pushing the plug axially into

the socket.

Once firmly latched, connection cannot be broken by

pulling on the cable or any other component part other

than the outer release sleeve.

When required, the connector is disengaged by a

single axial pull on the outer release sleeve.

This first disengages the latches and then withdraws

the plug from the socket.

LEMO connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (LEMO

connector, cable and your equipment) will be easier because LEMO connectors are recognized.

CE marking

means that the appliance or equipment bearing it complies with the protection requirements of one or

several European safety directives. CE marking

applies to complete products or equipment,

but not to electrome-

chanical components, such as connectors.

LEMO connector specifications conforms the requirements of the RoHS directive (2011/65/EU) of the European Parlia-

ment and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical

and electronic equipment marketed in Europe.

www.lemo.com

UL Recognition

CE marking

RoHS

Step 1: Select connector series

3 steps to select the right connector

Select the appropriate LEMO connector series according to the environmental parameters that will affect your device

or cable such as indoor, outdoor, temperature range, ingress protection of the mated connector and of your device.

Use the table shown on page 4.

Part number coding

Step 2: Select connector size

B, K, T, S or E

Use the section (mm

) or the AWG of your cable wire to select the optimal contact diameter (values vary between

solder, crimp or print contact), see page 8.

Use this optimal contact diameter to determine the right connector size as well as the insert configuration, see page 6.

Part number coding

Step 3: Complete the part number

0, 1, 2, 3, 4, 5 or 6

Now that you know the series, as well as the insulator configuration, complete the part numbering system with the help

of the following table.

Part number coding

B Series (indoor, keyed)

Model

Series

Insert

configuration

Housing

material

Insulator

material

Contact

Collet

Variant

T Series (outdoor, keyed)

K Series (outdoor, keyed)

S Series (indoor, stepped insert)

Note:

Figures in the above table refer to the catalogue pages.

E Series (outdoor, stepped insert)

103

112

119

115

121

www.lemo.com

串口烧写f240的flash: 不用仿真器，将240的串口和pc的串口相连，怎样将编好的程序下载到 240的flash中，具体步骤是...; kuangql 微控制器 MCU

如何解决小云台电机无法安装滑环问题: 大家好，最近在研究云台电机。买了一个2206型小电机，中心孔只有4.8mm。但是滑环没有这么小的...; crazymumu 工控电子

电子灭蟑螂器: 夏天蟑螂害人,传播疾病.用药成本高且副作用大,能不能用电子的方法来灭蟑螂呢! 本人用基本的电路是可行...; pcyk808686 嵌入式系统

P430颅内出血检测设备的研制策略: P430颅内出血检测设备的研制策略 1 引言在中国有许多因创伤性颅脑损伤的患者急需抢救，但相当一...; dtcxn 医疗电子

【NXP Rapid IoT评测】Hello BLE: NXP Rapid IoT 套件集成了低功耗蓝芽 (BLE) 功能，在 Hello Sensor 帖...; slotg RF/无线

【Follow me第二季第2期】Arduino UNO R4 WiFi 全部任务汇总: 活动链接： https://www.eeworld.com.cn/huodong/digik...; starsphere DigiKey得捷技术专区

EPC推出采用汽车级eGaN技术驱动激光器ToF演示板

EPC宣布推出15V，28A大电流脉冲激光二极管驱动器演示板EPC9144。符合AEC Q101标准的EPC2216的快速转换能力可提供功率脉冲，以驱动激光二极管，VCSEL或LED，速度比同等MOSFET快十倍。 EPC9144附带一个插入器板，一组具有5mm x 5mm方形可拆卸式PCB板，可容纳不同激光器的封装，RF连接器以及一系列用于不同负载实验的封装。可支持安装许多不同的激光器或其他负...[详细]
燃料电池距我们有多远？

摘要：目前，燃料电池是全球能源领域的开发热点。介绍了燃料电池的原理、分类、特点及研发和应用现状，燃料电池作为新的清洁能源应用前景广阔，但目前仍处于研发和示范阶段，距广泛商业化阶段还有相当的距离。关键词：燃料电池；分类；研究；应用现状引言国际能源界预测，本世纪氢能将得到广泛的应用，而燃料电池将成为利用氢能的重要途径。燃料电池是继水力、火力、核能之后的第四代发电装置，它是可以替代内燃机...[详细]
国产彩电厂商纷纷布局列队“吆喝”OLED

进入5月，OLED终于“接棒”成为彩电行业的新热点。　　“首款国产品牌的OLED已经在卖场里出样了。”7日，南京一家卖场负责人告诉记者，在新款电视的上市计划表上，包括TCL、长虹、康佳等都在积极发力，准备推出旗下OLED。“从整个行业来看，各大工厂齐出手，作为目前最高端的产品，OLED的前景不可小觑。” 　　良品率提升彩电商纷纷布局　　OLED一直以来面临的短板是良率不...[详细]
懂你的才是最好的主流车联网系统盘点

“合适的才是最好的，懂你的才是最贴心的。”这句话适用于任何领域，哪怕放在当下竞争激烈的汽车市场也不例外。购买一辆车，有很多种理由，能让你付款的可能只是其中一个。近日，邦哥的朋友准备换车，而在列出诸多条件之后，发现目前市场中有太多产品过于趋同。动力、配置如此，且越来越多车企的“套娃”设计，也让这位朋友心生厌烦。由于这位朋友选择的多为合资车型，车联网系统智能程度较（nan）低...[详细]
【GD32 MCU 移植教程】10、从STM32F030系列移植到GD32E230系列

1. 前言 GD32E230 对比 STM32F030 有着很好的兼容性和更高的性价比，内核和外设都有所增强。本人曾做过产品的 MCU 替换，将基于 STM32F0xx 1.5.0 固件库的应用程序移植到 GD32E230 上，大体上来说工作量不大，移植后的效果也不错，GD32E230 相比 STM32F030 有不少功能的升级，主频也更高，能感觉到国产 MCU 一直在进步。本人将此前的移植经验...[详细]
智能家居须防“不速之客” 黑色产业链浮出水面

12月5日，第四届世界互联网大会发布年度成果文件《乌镇展望》，指出下一代互联网发展、人工智能应用、数字经济转型等新兴议题已经成为治理新热点。 100多元的智能摄像头、300多元的智能电饭锅、1000多元的扫地机器人，并不高昂的价格和方便的体验，让越来越多的人开始尝鲜，享受智能生活的便利。然而，伴随着以智能家居为代表的智能设备融入日常生活，个人隐私泄露、生命财产利益遭威胁等安全警报频频...[详细]
热管理：突破功率密度障碍的 3 种方法

热管理：突破功率密度障碍的 3 种方法几乎每个应用中的半导体数量都在成倍增加，电子工程师面临的诸多设计挑战都归结于需要更高的功率密度。例如下面这几类应用： • 超大规模数据中心：机架式服务器工作使用的功率让人难以置信，这让公用事业公司和电力工程师难以跟上不断增长的电力需求。 • 电动汽车：从内燃机到 800V 电池包的过渡会导致动力总成的半导体组件数量呈指数增加。 • ...[详细]
智能制造浪潮逼近，是挑战更是机遇！

随着新一代信息技术的兴起，物联网、大数据、AI与工业技术加速融合，推动了工厂生产线向数字化转型，并给传统制造业带来巨大的冲击。新一代的制造业，不仅要求高效的生产，还要快速响应市场的需求，同时具有灵活的处理能力，即满足市场个性化定制的需求。为了获得未来的竞争力，制造业正在大力推动机器换人和智能化转型，一场巨大的产业变革正在到来。谈到制造业，人们可能会轻松联想到车间、机器和工人等元素，其实制造是一...[详细]
北京6条地铁线电信3G全覆盖联通移动将跟进

家住丰台区的刘先生昨天发现，在乘坐5号线地铁上班时，自己手机的3G网络信号竟然满格了，还能流畅地上网看视频，“前两天在地铁里上网还检测不到3G网络呢，这也太快了！”刘先生的发现不是个别现象。昨日，北京电信相关负责人发微博，北京电信将在地铁1号、2号、5号、8号、10号线实现3G全覆盖，84个地下站相继竣工，隧道和站台的2G、3G系统已全线投入试运行。 “我点进一个综艺节目视频，只缓冲了3、4秒...[详细]
雷军：Q3小米重返智能手机全球前三，研发逐年增加原因揭秘

11月5日消息，在今日的小米开发者大会上，小米董事长兼CEO雷军援引IDC近日发布的数据称，今年第三季度，小米重返智能手机出货量世界前三。他认为，这背后的支撑是技术，小米的研发投入在逐年增加。他以相机技术为例，今年小米拿了两次DxOMark榜单第一，累计霸榜了111天。雷军还透露，小米的相机部门工程师已从两年前的122人增加到850人，增长了6倍。 ...[详细]
东芝推出高压MOSFET “πMOS VIII”系列

东京—东芝公司（TOKYO：6502）今天宣布推出新系列高压MOSFET “πMOS VIII”系列，并推出了该系列的首款产品“TK9J90E”，并计划于2013年8月投入量产。通过优化芯片设计，可将其单位面积导通电阻（Ron•A）较同类产品降低约24%；而门极电荷（Qg）性能降低约24%，则可将关断时间（toff）改善约28%。主要规格: 扩展阅读：东芝推出用...[详细]
stm32快速学习1——环境的建立

安装keil for arm 下载stm32固件库3.4 解压，勿乱移动解压文件内的文件，因为项目内使用的都是相对路径。进入 STM32F10x_StdPeriph_Lib_V3.4.0\Project\STM32F10x_StdPeriph_Template\MDK-ARM 打开keil文件，修改一下这个项目模板删除左侧的stm32_eval文件夹、doc文件夹、使用的是stm32f103R...[详细]
谱瑞Q2 T-CON受美系NB延迟出货影响营收小幅季减

谱瑞受到美系客户NB新品推出时程延后，从原本的第2季延迟至第3季上市，因此第2季仅靠高速传输产品持续放量，营收应落在小幅季减水位，也因产品组合转佳，毛利率应可提升，上半年力拼去年成绩；法人预期，谱瑞全年营运火力集中在下半年，今年度仍有机会维持成长。谱瑞是中国大陆少数有能力提供DP/eDP T-CON规格产品的IC设计公司，主要从事高速讯号传输介面及显示晶片之研发、设计及销售。今年第1季各产...[详细]
一加5将于6月21发布隔日火速开售

eeworld网消息，6月7日，一加手机正式对外公布一加5将于6月21日上午10:00在北京751 D-PARK 79罐发布，并于发布会第二天6月22日上午10:00 火速开售。同时，一加5发布会门票将于6月8日10点在官网开售（链接：http://www.oneplus.cn/one-piece-5）。一加官方社区也于今日正式开设OnePlus 5 讨论版块，用户可在该版块内沟通交流一加5相关...[详细]
GPIO初始化之PB3/PB4/PA13/PA14/PA15引脚的复用

说明：库文件版本：3.5.0 1.为什么要复用PB3/PB4/PA13/PA14/PA15 在mcu复位的时候这几个引脚被作为jtag的功能。当我们要使用这些引脚作为普通的I/O时必须进行引脚的功能复用。 2.PB3/PB4/PA13/PA14/PA15引脚默认功能参照 PB3-----------------JTDO PB4-----------------JNTRST...[详细]