600 Watt resistor designed for various applications including power
transmission, traction, variable speed drives, power supplies, robotics,
motor control and power control devices. Suitable for liquid or air
cooled heat sink systems
•
Power Dissipation
•
Value Range
•
Tolerance Options
•
TCR Options
•
Maximum Voltage
•
Dielectric Strength
•
Special Features
600 watts at max 70°C bottom case temp
R5 to 100K
±5% or ±10%
±150ppm/°C
5000Vdc
12000Vdc
Partial discharge 4Kvrms <10 pc up to 7kV. Please consult with company regarding
application areas. Vibration proof. Very low inductance
RoHS Compliant.
Characteristics
Power rating
Resistance range
Tolerance
Temperature coefficient
Maximum working voltage
600W at 70ºC effective ambient
R5 to 1M
± 1% (F) - ± 10% (K) - ± 5% (J) Std
± 100ppm / ºC (25ºC - 100ºC)
5kV rms
Partial discharge
Voltage proof test
Typical inductance
Parallel capacitance
Capacitance / mass
Short term overload
Thermal resistance
Mounting screw / max. torque
Contacts / max. torque
4kV rms. <10pC
7kV rms.
<100nH measured at 100kHz
40pF
100pF
1kW - 10 sec.
Rth 0.115ºC/W
M4, normal / 1.8Nm
M5, normal / 2Nm
Working temperature range -55ºC to +150ºC
Dielectric strength
Creepage distance
6kV/50Hz test time 10sec.
40mm
Specifications
Short time overload
Humidity 56 days / 40ºC / Steady state 95%
Temperature -55 / +125 / 5 cycling cycles
Shock 40g / 4,000 times
Vibrations 2-500Hz / 10g
Load life Pn 30 min. on / 1,000cyl 30 min. off
1,000W / 10 sec 0.4%
∆R ±0.25%
∆R ±0.20%
∆R ±0.25%
∆R ±0.25%
∆R ±0.40%
ARCOL UK Limited,
Threemilestone Ind. Estate,
Truro, Cornwall TR4 9LG, UK.
T +44 (0) 1872 277431
F +44 (0) 1872 222002
E sales@arcolresistors.com
The information contained herein does not form part of
a contract and is subject to change without notice. Arcol
operate a policy of continual product development therefore,
specifications may change.
www.arcolresistors.com
selected from our range is suitable for the intended
component
application. If in doubt please ask Arcol.
www.arcolresistors.com
Page 1 of 2
2/12.14
For more information and ordering, please consult
It is the responsibility of the customer to ensure that the
FPA600
600W Thick Film Heatsink
Resistors
Derating Curve
Series
FPA600
120
720
Ordering Procedure
Standard resistor: Specify series, watts, ohmic value,
480
360
240
120
Rated power %
80
•
60
High Power Desinty on Heatsink
•
40
Vibration Proof
• Low Profile
20
• Very low inductance
0
0
25
50
75
100
125
150
0
175
Case temperature (°C)
Dimensions
Dimensions (mm)
Rated power (W)
600W Thick Film Heatsink Resistor
100
600
tolerance code. e.g FPA600 10R J
-0.05
ø4.1
+0.2
Other terminal dimensions available, contact ARCOL for more information
Pulse Rating
For pulse duration >7.5 µS and, maximum allowed voltage levels, the maximum peak energy of 0.6J is limited by the average power
rating of 600W. For pulse duration times <7.5 µS it has not been possible to reliably establish maximum energy failure point, although it
is known that the pulse capability is higher than the curve shown in the graph below.
Whilst these parts are designed to operate in high frequency circuits, where dv/dt is faster than 250V/µS, it is recommended that the resistor is tested under worst case application
conditions to ensure that unknown attribute of the application waveform are completely accounted for.
ARCOL UK Limited,
The information contained herein does not form part of
a contract and is subject to change without notice. Arcol
The information contained herein
product development therefore,
operate a policy of continual
does not form part of a contract and
is subject to change without notice. Arcol operate a policy of
specifications may change.
continual product development, therefore, specifications may change.
It is the responsibility of the customer to ensure that the component
It is the responsibility of the customer to ensure that the
selected from our range is suitable for the intended application. If in
