G2 Series
2-Piece Trunk and Distribution Connectors Product Information
Broadband
Products
Connector Specifications
Bandwidth:
5 MHz to 1 GHz
Operating Range:
-40°F to +140°F
Nominal Impedance:
75 ohms
Shielding Effectiveness:
> 130 dB
Return Loss:
30 dB minimum
Insertion Loss:
< 0.12 dB (pin types)
Cable Retention:
Exceeds
cable manufacturers'
maximum pulling
tension specifications
Corning Gilbert introduces the next
generation in 2-piece connector
technology, with patented design
features that provide clear performance
advantages over traditional two
piece connectors.
Only the G2 Series gives installers a
full view of the cable’s center conductor
insertion into the connector seizing
mechanism, eliminating traditional
blind entry installations. A unique
center conductor seizing system
prevents actuator lockup and
preserves connector reusability. With
the patented support sleeve located in
the back nut of the connector, cable
“pull back” is minimized. This eliminates
cable kinking typically associated with
2-piece connector installation.
© 2002 Corning Gilbert Inc. G-1400-594 07/02
1
Materials and Construction
of Connector Components:
Product Features
1
•
Support sleeve located in main
nut assembly reduces “pull back”
during installation
Back nut radius allows smooth
transition of heat shrink tubing
Visible entry of center conductor into
seizing mechanism
(no blind entry)
•
Unique Actuator closing mechanism
preserves reusability
Flush insulator prevents moisture
from collecting or migrating along
the path
Non-rotational design for
installation and disassembly
Brass pins with bright acid tin
plating for excellent RF conductivity
ASTM 6262 aluminum
alloy with gold chromate
conversion coating for
excellent corrosion resistance
and a dry film lubricant to
prevent thread galling.
Contact pins and support
sleeves are brass with bright
acid tin plating providing
excellent RF conductivity.
O-rings are ultraviolet and
ozone resistant EPDM for
maximum durability.
•
•
•
•
•
Ordering Information
2
2.31 [58.37 mm]
.31 [7.9 mm]
.067 [1.7 mm] ¯ Pin
5/8-24 THD
Center Conductor
Cutting Guide
2
General Ordering
Information:
Pin Connector
Splice Connector
CH
SP
EXT
3" Extension Connector
EXT-6
6" Extension Connector
BAFF
"F" Female Connector
AFM
TR
"F" Male Connector
Cable Terminator
CommScope P-3
Times Fiber T-10
.500
.625
.750
.875
CommScope QR
.540
.715
.860
Part Number
G2-500-TYPE
2
-P3-T
G2-625-TYPE
2
-P3-T
G2-750-TYPE
2
-P3-T
G2-875-TYPE
2
-P3-T
Times Fiber TX
.480
.565
.700
Part Number
G2- 480-TYPE -TX-T
2
G2-565-TYPE -TX-T
2
G2-700-TYPE -TX-T
2
Pin length is standard 2.31”
G2-540-TYPE
2
-QR-T
G2-715-TYPE
2
-QR-T
G2-860-TYPE
2
-QR-T
Trilogy MC2
.500
.650
.750
CommScope P-1
G2-500-TYPE -
MC
2
-T
2
G2-650-TYPE -
MC
2
-T
2
G2-750-TYPE -
MC
2
-T
2
G2-500-CH-P3-T
Pin Connector with a 2.31” pin
for .500 P3/T10 cable
.500
.750
G2-500-TYPE -
P1-
T
2
G2-500-TYPE -
P1
-T
2
Corning Gilbert Inc.
Broadband Products
5310 W. Camelback Rd.
Glendale, AZ 85301 U.S.A.
phone:
800 528 5567 (U.S. and Canada)
(01) 623 245 1050 (International)
800 344 6358
(01) 623 931 0684
fax:
website: www.corning.com/corninggilbert
e-mail:
info-gilbert@corning.com
© 2002 Corning Gilbert Inc. G-1400-594 07/02
微控制器 MCU
