Model G450N50W4
Flange Mount Termination
450 Watts, 50
Ω
Description
The G450N50W4 is high performance Aluminum Nitride (AlN) flange
mount termination intended as a cost competitive alternative to Beryllium
Oxide (BeO). The termination is also RoHS compliant!
General Specifications
Resistive Element
Substrate
Mounting Flange
Operating Temperature
Thick Film
AlN Ceramic
Nickel Plated Copper
-50 to +150°C (see de rating chart)
Features:
•
RoHS Compliant
•
450 Watts
•
DC – 1.7 GHz
•
AlN Ceramic
•
Non-Nichrome Resistive
Element
•
Low VSWR
•
100% Tested
Tolerance is
±0.010”,
unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400.
All dimensions in inches.
Electrical Specifications
Resistance Value:
Power:
Frequency Range:
Return Loss
50 Ohms,
±
2%
450 Watts
DC – 1.7GHz
>20dB
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance.
Specifications subject to change.
Outline Drawing
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
1 of 2
USA/Canada:
Toll Free:
Europe
:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model G450N50W4
Typical Performance:
G450N50W4 Return Loss
XY Plot 1
0.00
-5.00
-10.00
Return Loss (dB)
-15.00
-20.00
-25.00
-30.00
-35.00
-40.00
-45.00
-50.00
0.25
0.50
0.75
1.00
1.25
Freq (GHz)
1.50
1.75
2.00
Power De-rating:
Mounting Footprint and Procedure:
*Actual performance could be limited by the solder properties of the
application
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
