INDUCTANCE TOLERANCE IS MEASURED AT 0.3 NANO HENRY
表面贴装
YES
端子面层
Matte Tin (Sn) - with Nickel (Ni) barrier
端子位置
DUAL ENDED
端子形状
WRAPAROUND
测试频率
100 MHz
容差
8.333%
文档预览
Notice for TAIYO YUDEN Products
[ For High Quality and/or Reliability Equipment
(Automotive / Industrial Equipment) ]
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■
Product information in this catalog is as of October 2017. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual product specification sheets.
■
Please contact TAIYO YUDEN for further details of product specifications as the individual product specification
sheets are available.
■
Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
■
The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment), medical
equipment classified as Class I or II by IMDRF, industrial equipment, and automotive interior applications, etc.
Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which
may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment,
medical equipment classified as Class III by IMDRF).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control
equipment, undersea equipment, military equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,
in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN.
Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
■
Information contained in this catalog is intended to convey examples of typical performances and/or applications
of our products and is not intended to make any warranty with respect to the intellectual property rights or any
other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.
■
Please note that the scope of warranty for our products is limited to the delivered our products themselves and
TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.
Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in
accordance with such agreement.
■
The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafter
“TAIYO
YUDEN’official sales channel” Please note that the contents of this
s
).
catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’official sales
s
channel.
■
Caution for Export
Some of our products listed in this catalog may require specific procedures for export according to
“U.S.
Export
Administration Regulations”
,
“Foreign
Exchange and Foreign Trade Control Law”of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.
1
8
MULTILAYER CHIP INDUCTORS FOR HIGH FREQUENCY APPLICATIONS(HK SERIES)
MULTILAYER CHIP INDUCTORS FOR HIGH FREQUENCY APPLICATIONS (HK SERIES)
REFLOW
■PART
NUMBER
*Operating Temp. :
-55½125℃
AEC-Q200
H
K △
①
1
0
②
0
5
△
1
0 N
③
J － T
④
⑤
V
⑥
△＝Blank space
①Series name
Code
HK△
Series name
Multilayer chip inductor for high frequency
②Dimensions（L×W）
Code
1005
Type（inch）
1005（0402）
Dimensions
（L×W）［mm½
1.0×0.5
③Nominal inductance
Code
（example）
3N9
10N
R10
R12
※R＝Decimal point
※N＝0.0（nH type）
④Inductance tolerance
Code
J
S
⑤Packaging
Code
－T
⑥Internal code
Code
V
Nominal inductance［nH½
3.9
10.0
100
120
INDUCTORS INDUCTORS FOR HIGH FREQUENCY APPLICATIONS
Inductance tolerance
±5％
±0.3nH
Packaging
Taping
／
Internal code
MLCI for Industrial and Automotive
■STANDARD
EXTERNAL DIMENSIONS / STANDARD QUANTITY
Type
HK 1005
（0402）
L
1.0±0.05
（0.039±0.002）
W
0.5±0.05
（0.020±0.002）
T
0.5±0.05
（0.020±0.002）
e
0.25±0.10
（0.010±0.004）
Standard quantity [
pcs]
Paper tape
Embossed tape
10000
－
Unit：mm（inch）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
1
8
67
■PART
NUMBER
・ All the Multilayer Chip Inductors of the catalog lineup are RoHS compliant.
Note)
・ The exchange of individual specifications is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
・ *1: Automotive（AEC-Q200 Qualified) products
＜ ：AEC-Q200 qualified＞
All the Multilayer Chip Inductors of *1 marks are tested based on the test conditions and methods defined in AEC-Q200 by family item.
125℃ products： AEC-Q200 Grade1(we conduct the evaluation at the test condition of Grade1.)
85℃ products： AEC-Q200 Grade3 (we conduct the evaluation at the test condition of Grade3.)
Please consult with TAIYO YUDEN’s official sales channel for the details of the product specification and AEC-Q200 test results, etc.,
and please review and approve TAIYO YUDEN's product specification before ordering.
・ *2: Industrial products and Medical products
●HK
1005
Part number
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1005
1N0S-TV
1N2S-TV
1N5S-TV
1N8S-TV
2N0S-TV
2N2S-TV
2N4S-TV
2N7S-TV
3N0S-TV
3N3S-TV
3N6S-TV
3N9S-TV
4N3S-TV
4N7S-TV
5N1S-TV
5N6S-TV
6N2S-TV
6N8J-TV
7N5J-TV
8N2J-TV
9N1J-TV
10NJ-TV
12NJ-TV
15NJ-TV
18NJ-TV
22NJ-TV
27NJ-TV
33NJ-TV
39NJ-TV
47NJ-TV
56NJ-TV
68NJ-TV
82NJ-TV
R10J-TV
R12J-TV
R15J-TV
R18J-TV
R22J-TV
R27J-TV
Nominal
inductance
［nH½
1.0
1.2
1.5
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
Inductance
tolerance
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±0.3nH
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
Q
（min.）
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Self-resonant
DC Resistance Rated current
LQ Measuring Q（Typical）frequency［MH½½ frequency ［MH½½
［Ω½
［mA½（max.）
frequency
-55½ -55½
［MHz½
（typ.） （max.） （typ.）
100 300 500 800 1000 （min.）
+125℃ +85℃
100
11 25 34 43
52
10000 > 13000 0.08
0.04
300
900
100
11 25 35 44
52
10000 > 13000 0.09
0.04
300
900
100
11 24 33 44
48
6000
> 13000 0.10
0.05
300
850
100
11 23 30 36
42
6000
11000 0.12
0.06
300
700
100
11 21 27 34
39
6000
10500 0.12
0.06
300
700
100
10 18 25 31
36
6000
10000 0.13
0.07
300
700
100
10 18 24 31
35
6000
9500 0.13
0.07
300
650
100
10 18 24 31
34
6000
9000 0.13
0.08
300
650
100
10 18 24 31
35
6000
8500 0.16
0.09
300
600
100
10 18 24 31
35
6000
8000 0.16
0.10
300
550
100
10 18 24 31
35
5000
7500 0.20
0.11
300
500
100
10 18 24 31
35
4000
7000 0.21
0.12
300
500
100
10 18 24 31
35
4000
6500 0.20
0.12
300
500
100
10 18 24 31
34
4000
6000 0.21
0.12
300
500
100
10 18 24 31
34
4000
5800 0.21
0.13
300
450
100
10 18 24 30
35
4000
5700 0.23
0.15
300
430
100
10 18 24 30
34
3900
5600 0.25
0.16
300
430
100
10 18 23 29
32
3900
5500 0.25
0.17
300
430
100
10 18 23 29
32
3700
5200 0.25
0.18
300
400
31
3600
4900 0.28
0.21
300
380
100
10 18 23 29
100
10 18 23 29
31
3400
4500 0.30
0.22
300
360
100
10 18 23 29
31
3200
4300 0.31
0.23
300
340
100
11 18 23 29
31
2700
3900 0.40
0.28
300
330
100
11 18 23 28
30
2300
3500 0.46
0.31
300
320
100
11 18 23 28
30
2100
3100 0.55
0.35
300
310
100
11 17 22 26
27
1900
2800 0.60
0.42
300
300
100
11 17 21 25
26
1600
2300 0.70
0.47
300
300
100
11 16 20 23
22
1300
1900 0.80
0.50
200
250
100
11 16 20 23
21
1200
1700 0.90
0.52
200
250
100
11 16 19 21
18
1000
1500 1.00
0.58
200
230
100
11 16 18 18
16
750
1300 1.00
0.61
200
220
100
11 15 17 18
11
750
1200 1.20
0.70
180
200
100
10 14 16 15
6
600
1100 1.30
0.81
150
200
100
10 14 14 12
－
600
1000 1.50
0.94
150
200
100
10 12 10 －
－
600
800
1.60
1.10
150
200
100
12 17 17 －
－
550
920
3.20
2.57
140
200
100
12 16 － －
－
500
810
3.70
2.97
130
200
100
12 16 － －
－
450
700
4.20
3.29
120
200
100
12 14 － －
－
400
600
4.80
3.92
110
200
Thickness
［mm½
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
Note
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
,*2
INDUCTORS INDUCTORS FOR HIGH FREQUENCY APPLICATIONS
／
68
※）The rated current is either the DC value at which the internal L value is decreased within 5% with the application of DC bias,
or the value of current at which the temperature of the element is increased within 20℃.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
1
8
Multilayer chip inductors
Multilayer chip inductors for high frequency, Multilayer chip bead inductors
Multilayer common mode choke coils（MC series F type）
Metal Multilayer Chip Power Inductors (MCOIL
TM
MC series)
■PACKAGING
①Minimum Quantity
●Tape
& Reel Packaging
Type
CK1608（0603）
CK2125（0805）
CKS2125（0805）
CKP1608（0603）
CKP2012（0805）
CKP2016（0806）
CKP2520（1008）
NM2012（0805）
NM2520（1008）
LK1005（0402）
LK1608（0603）
LK2125（0805）
HK0603（0201）
HK1005（0402）
HK1608（0603）
HK2125（0805）
HKQ0402（01005）
HKQ0603W（0201）
HKQ0603S（0201）
HKQ0603U（0201）
AQ105（0402）
BK0402（01005）
BK0603（0201）
BK1005（0402）
BKH0603（0201）
BKH1005（0402）
BK1608（0603）
BK2125（0805）
BK2010（0804）
BK3216（1206）
BKP0402（01005）
BKP0603（0201）
BKP1005（0402）
BKP1608（0603）
BKP2125（0805）
MCF0605（0202）
MCF0806（0302）
MCF1210（0504）
MCF2010（0804）
MCFK1608(0603)
MCFE1608（0603）
MCKK1608（0603）
MCHK2012(0806)
MCKK2012（0805）
Thickness
mm（inch）
0.8 （0.031）
0.85（0.033）
1.25（0.049）
0.85（0.033）
1.25（0.049）
0.8 （0.031）
0.9 （0.035）
0.9 （0.035）
0.7 （0.028）
0.9 （0.035）
1.1 （0.043）
0.9 （0.035）
0.9 （0.035）
1.1 （0.043）
0.5 （0.020）
0.8 （0.031）
0.85（0.033）
1.25（0.049）
0.3 （0.012）
0.5 （0.020）
0.8 （0.031）
0.85（0.033）
1.0 （0.039）
0.2 （0.008）
0.3 （0.012）
0.3 （0.012）
0.3 （0.012）
0.5 （0.020）
0.2 （0.008）
0.3 （0.012）
0.5 （0.020）
0.3 （0.012）
0.5 （0.020）
0.8 （0.031）
0.85（0.033）
1.25（0.049）
0.45（0.018）
0.8 （0.031）
0.2 （0.008）
0.3 （0.012）
0.5 （0.020）
0.8 （0.031）
0.85（0.033）
0.3 （0.012）
0.4 （0.016）
0.55（0.022）
0.45（0.018）
0.6 (0.024)
0.65（0.026）
1.0（0.039）
0.8 (0.031)
1.0（0.039）
Standard Quantity ［pcs½
Paper Tape
Embossed Tape
4000
－
4000
－
－
2000
4000
－
－
2000
4000
－
－
3000
－
3000
－
3000
－
3000
－
2000
－
3000
－
3000
－
2000
10000
－
4000
－
4000
－
－
2000
15000
－
10000
－
4000
－
－
4000
－
3000
20000
40000
15000
－
15000
－
15000
－
10000
－
20000
－
15000
－
10000
－
15000
－
10000
－
4000
－
4000
－
－
2000
4000
－
－
4000
20000
－
15000
－
10000
－
4000
－
4000
－
15000
－
－
10000
－
5000
－
4000
4000
－
4000
－
3000
4000
－
-
3000
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_mlci_pack_e-E06R01
②Taping material
●Card
board carrier tape
Top tape
Base tape
Sprocket hole
Bottom tape
Chip Filled
Chip cavity
CK
CKP
CK
CKS
LK
LK
LK
HK
HK
HK
HKQ
HKQ
AQ
1608
1608
2125
2125
1005
1608
2125
0603
1005
1608
0402
0603
105
BK
BK
BK
BK
BK
BK
BKP
BKP
BKP
BKP
BKP
BKH
BKH
MCF
MC
MC
0402
0603
1005
1608
2125
2010
0402
0603
1005
1608
2125
0603
1005
0605
1608
2012
Chip
●Embossed
Tape
Top tape
Sprocket hole
Base tape
Chip cavity
CK
CKS
CKP
CKP
CKP
NM
NM
LK
HKQ
HK
2125
2125
2012
2016
2520
2012
2520
2125
0402
2125
BK
BK
MCF
MCF
MCF
MC
MC
2125
3216
0806
1210
2010
1608
2012
Chip Filled
Chip
③Taping Dimensions
●Paper
tape (8mm wide)
Sprocket hole
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
1.75±0.1
(0.069±0.004）
Unit：mm（inch）
T
3.5±0.05
(0.138±0.002)
4.0±0.1
(0.157±0.004)
2.0±0.05
(0.079±0.002)
A
B
F
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
移动便携
