HVS Series
Powertron
•
•
•
•
•
•
•
Resistances from 100k to 1T Ohms
Power Rating 0.125 to 1 Watt
Resistance Tolerances to ± 5%
TCR’s to ±50 ppm/K
Non-Magnetic (contact PtAg)
High Value Thick Film Resistance Element
Sizes: 0805 / 1206 / 2512
SPECIFICATIONS
Type
Power Rating ( W )
Working
Voltage
( VAC )
Untrimmed
0805
0.125
600
1206
0.25
1000
Tolerances Available ( % )
Temperature Coefficients Available ( ± ppm/K )
Voltage Coefficient ( ppm / V )
Other specifications available upon request
2512
1.0
3000
Resistance Range
(
W
)
100k - 100M
5%
50
<50ppm/V
5%
100
<250ppm/V
5%
100
<500ppm/V
10%
500
<1000ppm/V
10%
1000
<2000ppm/V
5%
50
<50ppm/V
5%
100
<100ppm/V
5%
100
<250ppm/V
10%
500
<1000ppm/V
10%
1000
<2000ppm/V
1
5%
50
<10ppm/V
5%
100
<25ppm/V
5%
100
<100ppm/V
5%
500
<250ppm/V
5%
1000
<500ppm/V
W @ 70 °C / 0W @ 155 °C
>100M - 1G
>1G - 10G
>10G - 100G
>100G - 1T
Document Number: 64310
Revision: 20-09-10
For technical questions, contact:
powertron@vishaypg.com
www.powertron.de
1
HVS Series
Powertron
SPECIFICATIONS
(continued)
Specification
Temperature Range
Climactic Category
Solderability
Max. Soldering Temperature
Value
-55°C to +155°C
55 / 155 / 56
250°C / 3s (up to 6 month after shipment resp. at storage in Nitrogen)
260°C / 10s
Long Term Stability
Storage 125°C / 1000h
Maximum Voltage / 1000h
Max
DR
<1 GW
±0.5%
±0.5%
1 GW - 10 GW
±1%
±1%
>10 GW
±2%
±2%
Type
Dimensions
L
0.080
+0.006 / -0.002
[ 2.0
+0.15 / -0.05
]
0.126
+0.006 / -0.002
[ 3.2
+0.15 / -0.05
]
0.250
+0.006 / -0.002
[ 6.3
+0.15 / -0.05
]
B
0.050
+0.006 / -0.002
[ 1.25
+0.15 / -0.05
]
0.060
+0.008 / -0.002
[ 1.5
+0.2 / -0.05
]
0.138
+0.008 / -0.002
[ 3.5
+0.2 / -0.05
]
D
0.016
+0.006 / -0.002
[ 0.4
+0.15 / -0.05
]
0.016
+0.006 / -0.002
[ 0.4
+0.15 / -0.05
]
0.024
+0.006 / -0.002
[ 0.6
+0.15 / -0.05
]
C
0.012
+0.008 / -0.004
[ 0.3
+0.2 / -0.1
]
0.012
+0.008 / -0.004
[ 0.3
+0.2 / -0.1
]
0.035
±0.008
[ 0.9
±0.2
]
0805
1206
2512
Power Derating Curve
120
100
Power ( % )
80
60
40
20
0
Packaging:
Bulk or Tape & Reel per IEC 286-3 / EIA 481-1-A
Tape width 8mm / Reel Diameter 180 or 330mm
Minimum quantity Bulk / 100 pieces per value
Minimum quantity Tape & Reel / 1000 pieces per value
0
25
50
75
100
125
150
175
Ambient Temperature (°C)
Ordering Information
Part Number - Resistance - Tolerance - TCR - Packaging
Example: HVS 2512 10GOhms 10% 500ppm Tape
( Note: if no TCR is Specified / The highest value will be supplied )
www.powertron.de
2
For technical questions, contact:
powertron@vishaypg.com
Document Number: 64310
Revision: 20-09-10
Legal Disclaimer Notice
Vishay Precision Group
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of
purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase.
To the maximum extent permitted by applicable law, Vishay Precision Group
disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,
including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications
and performance may vary over time. Statements regarding the suitability of products for certain types of
applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on
Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the
properties described in the product specification is suitable for use in a particular application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by
any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use
in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any
damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel
to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document No.: 63999
Revision: 27-Apr-11
www.vishaypg.com
1
电子竞赛
