Product Brief
II-EVB-PIC-2128
™
Serial-to-Ethernet LAN Device Server
Connect One’s AT+i
™
protocol eliminates
the need for any protocol porting or
Connect One’s II-EVB-PIC-2128 evaluation development on the host, and provides all
board is based on Connect One’s iChip
™
Internet networking and security functionality
CO2128
Secure
IP
controller
and in a simple-to-use protocol.
Microchip’s PIC24FJ64GA006 host CPU.
General Description:
II-EVB-PIC-2128
provides
networking
capabilities via the iChip CO2128, which
streams data over TCP or UDP sockets (up to
10 simultaneous active sockets are available),
and manages two listening sockets. A secure
socket (SSL3/TLS1) is fully supported.
Additional features include the ability to send
and receive email messages with or without
attachments, a built-in web server with two
internal websites: one for remote control and
management of the evaluation board, and the
other for the host device; HTTP, FTP, and
TELNET clients.
Software Support:
A set of software drivers and high-level API
functions is available on a CD provided with the
evaluation board. These API functions enable
the PIC host CPU to communicate with the
iChip CO2128.
To develop applications based on the PIC
Host Driver API functions, the following
environment needs to be installed on your PC:
MPLAB IDE 8.0 or higher
MPLAB C30 ‘C’ compiler
MPLAB ICD 2 debugger/programmer
The reference design is intended for
Internet Protocols:
designers of open and flexible internet-
ARP, ICMP, IP, UDP, TCP, DHCP, DNS,
enabled applications.
NTP, SMTP, POP3, MIME, HTTP, FTP and
TELNET
Features and benefits:
Dual core, secure Internet architecture
Security Protocols:
Flexible development environment based
SSL3/TLS1, HTTPS, FTPS, RSA, 3DES,
on the established PIC host architecture
AES-128/256, RC-4, SHA-1 and MD-5
Flexible, low cost, PHY-independent
design
Protocols Accelerated in HW:
Evaluation board can be used for
AES, 3DES and SHA
application development targeting LAN,
cellular, or WiFi applications
Hardware Description:
The Internet engine inside the evaluation
The II-EVB-PIC-2128 package includes the
board is Connect One’s remotely updateable following items:
iChip CO2128 Secure IP Controller.
II-EVB-PIC-2128 motherboard
RS232 male/female cable
RJ45 Cat 5 100BaseT cable
110V or 220V power supply adapter
Resource CD
Product Brief
Publication Number 17-2600-10
Configuration:
The iChip firmware can be easily
configured via the web or via Connect One’s
iChipConfig utility. This Windows-based
utility enables quick configuration of the
iChip CO2128 via a local serial connection.
The iChipConfig utility also enables
packaging of the application’s website.
The PIC firmware can be compiled by
the C30 compiler and programmed by the
ICD 2 debugger available from Microchip.
For more details, visit the Microchip website
at
www.microchip.com.
II-EVB-PIC-2128 Block Diagram
Typical Applications:
Connecting an RS-485 Modbus network to the Internet.
Connecting several sensors to the Internet.
Ordering Information:
II-EVB-PIC-2128-110
: Evaluation board with 110V power supply adapter.
II-EVB-PIC-2128-220
: Evaluation board with 220V power supply adapter.
II-EVB-PIC-2128, iChip, AT+i and Connect One are trademarks of Connect One Ltd.
Specifications are subject to change without notice.
Copyright © Connect One Ltd., March 2008. All rights reserved.
模拟电子
