Compute Module IO Board V3
The Compute Module IO Board V3 is a development kit for those who wish to make use of the
Raspberry Pi in a more flexible form factor, intended for industrial applications. The IO Board
V3 is made for developing with CM3, CM3L, and CM1. This kit replaced the original Compute
Module IO Board in January 2017.
The Compute Module contains the guts of a Raspberry Pi 3 (the BCM2837 processor and 1GB
RAM). The accompanying IO Board is a simple,
open-source
breakout board that you can plug
a Compute Module into. The board hosts 120 GPIO pins, an HDMI port, a USB port, two
camera ports, and two display ports. Designing the Module into a custom system should be
relatively straightforward as we’ve put all the tricky bits onto the Module itself, and you have the
freedom to add extra components and place parts exactly where your product needs them.
The CM1, CM3, and CM3L are available for purchase in single units, or in batches of hundreds
or thousands.
https://www.raspberrypi.org/products/compute-module-io-board-v3/ 1/17/2017
TI技术论坛