JGG.0B.306.CLAD52Z,JGG.0B.306.CLAD52Z pdf中文资料,JGG.0B.306.CLAD52Z引脚图,JGG.0B.306.CLAD52Z电路-Datasheet-电子工程世界

文档预览

unipole & multipole

connectors

No reproduction or use without express permission of editorial or pictorial content, in any manner.

LEMO reserve the right at all times to modify and improve specifications without any notification.

LEMO unipole and multipole connectors

This catalogue gives the complete description of LEMO unipole and multipole type connectors. The LEMO manufacturing

programme has been extended to almost 40 series divided into 7 product families with specific mating and environmental

characteristics. Each series includes a wide variety of plug, socket, coupler and bridge plug models, available in contact

configurations adapted to all round cables, including up to 114 conductors, and a maximum diameter of 30 mm.

Watertight and vacuumtight models are also available. Since LEMO connectors are perfectly screened and designed to

guarantee very low resistance to shell electrical continuity, they are particularly adapted to applications where electro-

magnetic compatibility (EMC) is important.

Table of Contents

3 steps to select the right connector

................................................................................................................................................................................ 3

B Series (indoor, keyed)

Part Numbering system ........................................................................................................................................................................................ 13

Metal Housing models ........................................................................................................................................................................................... 14

Elbow socket models ............................................................................................................................................................................................. 25

Plastic housing models .......................................................................................................................................................................................... 28

Watertight or vacuumtight models ......................................................................................................................................................................... 30

Bridge models ........................................................................................................................................................................................................ 34

Threaded-latching models ..................................................................................................................................................................................... 35

Alignment Key and Polarized Keying System........................................................................................................................................................ 36

K Series (outdoor, keyed)

Alignment Key and Polarized Keying System........................................................................................................................................................ 49

T Series (outdoor, keyed)

Plastic housing models, alignment Key and Polarized Keying System ................................................................................................................. 56

B, K and T Series

Insert configuration, Housings, Insulators, Contacts, Collets, Variant .................................................................................... 57

S Series (indoor, stepped insert)

E Series (outdoor, stepped insert)

S, and E Series

Insert configuration, Housings, Insulators, Contacts, Collets, Variant ...................................................................................... 103

M Series (outdoor, keyed)..............................................................................................................................................................................................

123

F Series (outdoor, keyed)

.............................................................................................................................................................................................. 125

Spare parts

...................................................................................................................................................................................................................... 127

Accessories

Tooling

Panel cut-outs and PCB drilling pattern

....................................................................................................................................................................... 157

Cable assembly

(B, K, T, S and E series)....................................................................................................................................................................... 169

Technical characteristics...............................................................................................................................................................................................

182

Product safety notice

www.lemo.com

Precision modular connectors to suit your application

Over 75000 connectors

Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull

connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in

more than 80 countries with the help of over 40 subsidiaries and distributors.

The modular design of the LEMO range provides over 75000 connectors from miniature ø 3 mm to ø 50 mm, capable of

handling cable diameters up to 30 mm and for up to 114 contacts.

LEMO’s Push-Pull Self-Latching Connection System

This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in most

markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommuni-

cations and military.

This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolute

security against vibration, shock or pull on the cable, and facilitates operation in a very limited space.

The LEMO self-latching system allows the connector

to be mated by simply pushing the plug axially into

the socket.

Once firmly latched, connection cannot be broken by

pulling on the cable or any other component part other

than the outer release sleeve.

When required, the connector is disengaged by a

single axial pull on the outer release sleeve.

This first disengages the latches and then withdraws

the plug from the socket.

LEMO connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (LEMO

connector, cable and your equipment) will be easier because LEMO connectors are recognized.

CE marking

means that the appliance or equipment bearing it complies with the protection requirements of one or

several European safety directives. CE marking

applies to complete products or equipment,

but not to electrome-

chanical components, such as connectors.

LEMO connector specifications conforms the requirements of the RoHS directive (2011/65/EU) of the European Parlia-

ment and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical

and electronic equipment marketed in Europe.

www.lemo.com

UL Recognition

CE marking

RoHS

Step 1: Select connector series

3 steps to select the right connector

Select the appropriate LEMO connector series according to the environmental parameters that will affect your device

or cable such as indoor, outdoor, temperature range, ingress protection of the mated connector and of your device.

Use the table shown on page 4.

Part number coding

Step 2: Select connector size

B, K, T, S or E

Use the section (mm

) or the AWG of your cable wire to select the optimal contact diameter (values vary between

solder, crimp or print contact), see page 8.

Use this optimal contact diameter to determine the right connector size as well as the insert configuration, see page 6.

Part number coding

Step 3: Complete the part number

0, 1, 2, 3, 4, 5 or 6

Now that you know the series, as well as the insulator configuration, complete the part numbering system with the help

of the following table.

Part number coding

B Series (indoor, keyed)

Model

Series

Insert

configuration

Housing

material

Insulator

material

Contact

Collet

Variant

T Series (outdoor, keyed)

K Series (outdoor, keyed)

S Series (indoor, stepped insert)

Note:

Figures in the above table refer to the catalogue pages.

E Series (outdoor, stepped insert)

103

112

119

115

121

www.lemo.com

ADSL介绍: ADSL技术介绍 ADSL介绍很好帮顶了~！~！ Re: ADSL介绍 ...; Smithlee89 RF/无线

刚化的fpga小板的pcb 大家批判互相学习一下: 刚化的fpga小板的pcb 大家批判互相学习一下没有人来看啊 ...; caesar.song PCB设计

一个10W非隔离LED驱动电源的设计: 本文介绍了一款使用 TI 控制芯片 TPS92210 设计的 10W LED 驱动电源. TPS...; qwqwqw2088 电源技术

谁用过YZC-219/300KN(30t)压力传感器: 我们公司买了一个压力传感器，型号是YZC-219/300KN(30t)。有五根线，红线是电...; chenbingjy stm32/stm8

找不到具有OpenAdapter入口函数的Dll，驱动版本显示是nv4_disp.dll: 我最近在学习WDD的一点开发，根据帮助文档说，所有Directo3D要用到的调用函数都是从相...; DAVIS309 嵌入式系统

【翌创ET6001测评】以KEY控制LED: 为了一种GPIO口的输入功能，特为它配置了一个触摸式按键以控制LED的亮灭。其中，将GPIO2...; jinglixixi 国产芯片交流

为OLED屏增加GUI支持7：综合实例

环境：主机:WIN10 开发环境:MDK5.13 MCU:STM32F103 说明：前面的文章已经介绍了本GUI的基本功能，目前有的控件有文本控件，图片控件，以及进度条控件，这是我项目中所需要的，读者可以参考这些代码增加自己所需的控件。本文展示一个综合实例，显示一个完整的界面。文中用到调度框架pt-thread。实现效果：源代码： gui.h:gui头文件 /** ...[详细]
基于飞思卡尔MCU的电子稳定系统(ESC)方案

方案描述：飞思卡尔 MCU 、模拟器件与传感器产品扩展了车载电子稳定程序( ESC ) 的功能，可在困难的驾驶条件下帮助驾驶员有效控制车辆避免伤亡，在发生事故时降低其严重程度。电子稳定程序全面控制和监测车辆底盘系统。从入门级到高端产品，直至符合汽车电子设备委员会(AEC) AEC-Q100技术规格，以及其他严格的汽车工业标准的电子器件，我们的电子稳定程序套件提供世界一流质量的解决方案。 ...[详细]
升降压电源设计的种类

随着电子科技的不断发展，越来越多的电子设备进入我们的生活，要想让这些电子设备为我们服务，就离不开电源的驱动。所以设计一个稳定可靠，抗扰能力较高的电源至关重要。我们在实际应用场合中，经常会出现系统中各个模块供电不统一，或者供电电源的电压时常变化的（比如汽车中的电池电压受温度及发动机影响变化），此时需要一个稳压电源将电压固定在某个输出电压，所以需要一个升降压电路来适应输入电压的上升与跌落。在实际...[详细]
CAN总线测试分析解决方案

本方案针对总线分析和测试，主要有两套方案：一是使用没有英特佩斯的Vehicle Spy 软件和neo VI Fire/RED硬件，这个方案的软件Vehicle Spy的功能非常丰富，如网络监控、节点仿真和模拟、数据分析与采集、K线/UDS /GM LAN诊断、CCP/XCP标定、自动测试等功能，支持J1939，支持ODX、dbc、A2L等；硬件Fire具有6路CAN、4路LIN、4路K线，RE...[详细]
AMD机器人入门套件启动未来智能工厂

宣布推出 Kria KR260 机器人入门，这是 Kria 自适应模块系统（SOM）和组合的成员。 Kria KR260 是一个可扩展且开箱即用的机器人开发平台，通过现有的 Kria K26 自适应 SOM 为生产部署提供了一条无缝路径。凭借原生 ROS 2 支持、机器人应用程序开发的标准框架以及机器人和工业解决方案的预构建接口，新的 SOM 入门套件支持开发用于机器人、和工业通信和...[详细]
环球仪器携多功能贴装平台亮相慕尼黑电子展

环球仪器的标准平台，展现全方位的贴装能力，让厂家轻轻松松面对千变万化的市场需求，直接降低生产成本。（上海，2014年3月19日）环球仪器将在3月18日至20日，参加在上海新国际博览中心举行的慕尼黑上海电子生产设备展，向观众展示环球仪器多功能贴装平台的完备生产能力与及创新技术。环球仪器的专家也在展位现场，随时与参观者一起探讨如何应对目前面对的生产挑战。环球仪器...[详细]
包装机器人有什么特点？包装机器人的八大特点详解

包装机器人是工业机器人的其中一种，随着工业机器人技术发展迅猛，各行各业都有机器人的身影出现，包装机器人使用量在过去5年几乎翻了一番，企业对包装机器人的需求如此之大，那么包装机器人有那些优势特点呢？ 1、适用性强：当企业生产的产品的尺寸、体积、形状及托盘的外形尺寸发生变化时，只需在触摸屏上稍做修改即可，不会影响企业的正常生产。而传统机械式的码垛机更改相当的麻烦甚至是无法实现的。 2、高可靠性：包装...[详细]
600万欧元签下梅西，华为赔了还是赚了？

华为似乎变了。　　3月17日，华为正式签约梅西的消息在科技圈炸开了锅，估计不少人的第一反应都是，“没想到啊没想到，你华为这浓眉大眼的家伙也知道签国际代言人了”;而第二反应就是，“咦，居然还挖三星的墙脚，好污”。　　按理说，中国科技公司找明星合作也算不稀奇了，什么联想范冰冰、OPPO杨幂、小米张杰、美图Angelababy简直多得数不过来。　　华为签约梅西何以...[详细]
[ARM裸机程序][6]ARM GNU汇编程序示例

ARM GNU汇编程序框架 .section .data 初始化的数据 .section .bss 未初始化的数据 .section .text .global _start _start: 汇编代码入口地址汇编程序的示例 //start.s .bass .text .global _start _start: mov r1,#1 mov r2,#2 a...[详细]
中兴Axon 40 Ultra正式发布：无缺全面屏 6400万像素三主摄

5月9日下午消息，中兴手机正式发布全新一代中兴Axon 40 Ultra，这也是成为吴京代言之后的首款旗舰产品。　　中兴Axon 40 Ultra采用骁龙8旗舰芯片，屏幕、影像、性能等方面都有自己的特性，官方号称“为大场面而生”。　　中兴通讯高级副总裁、终端事业部总裁倪飞表示：“中兴手机在科技创新的道路上，始终保持着年轻的斗志和对创新的渴望。Axon也曾以多个全球第一，为行业开辟一...[详细]
外媒：高通呼吁股东抵制博通恶意收购

1月23日清晨，高通公司在致股东的一封信中表示，希望公司股东在3月6日举行高通年会时，拒绝博通的收购要求，否则博通股东将完全取代高通的董事会。在信中，高通对博通的收购行为进行了批评，称博通的收购行为存在监管问题。这意味着，即便博通对高通提出公平报价，也可能不会在未来18个月或更久的时间内为高通公司带来任何价值。信中还表示，博通的“立即向股东支付现金”的说法是“完全不现实的”。博通提议...[详细]
S3C2440裸机------SPI_FLASH编程

1.spi_flash.h #ifndef _SPI_FLASH_H #define _SPI_FLASH_H void SPIFlashReadID(int *pMID, int *pDID); void SPIFlashInit(void); void SPIFlashEraseSector(unsigned int addr); void SPIFlashProgram(unsig...[详细]
一种实现计时器变为倒计时器的设计方案

一般计时器变为倒计时器的设计思路是改变计时器中的计数芯片，或是重新设置芯片的功能等，其实还可以采用将显示器显示的结果“倒”过来显示，从而达到倒计时的目的。 1 方案设计的思路计时器每位显示的结果是递增的数值，如0.1.2.3.4.5.6.7.8.9,而倒计时器所显示的是递减的数值，如9.8.7.6.5.4.3.2.1.0,那只要用合适的逻辑电路完成这个显示结果转换，就可以将计时器变为倒计时器。...[详细]
LTE主导市场高通收益份额达63%

Strategy Analytics发布最新研究报告称，2013年Q2全球蜂窝基带芯片市场与去年同期相比小幅增长5.4%，达44亿美元。据估算，高通在蜂窝基带芯片市场的收益份额达63%，联发科和英特尔分别以13%和7%居其后，展讯和博通分列四、五位。LTE基带芯片占高通Q2总出货量40%以上 ...[详细]
IAR环境下ucosii在STM32上的移植

Ucosii移植到STM32上 1.使用的开发环境是IAR 5.4 STM32芯片为STM32F103ZET6 使用ST官方提供的标准固件库，建立工程，我下载的苦艰苦的版本为STM32F10x_StdPeriph_Lib_V3.5.0，里面的文件分布为：其中，Libraries文件夹里面放的是标准库文件，Project文件夹里面放的是STM32的各个外设的使用范例和一个工程模板，U...[详细]