Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■
Product information in this catalog is as of October 2018. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual product specification sheets.
■
Please contact TAIYO YUDEN for further details of product specifications as the individual product specification
sheets are available.
■
Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
■
The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment including,
without limitation, mobile phone, and PC) and medical equipment classified as Class I or II by IMDRF. Please be
sure to contact TAIYO YUDEN for further information before using the products for any equipment which may
directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment,
disaster prevention equipment, medical equipment classified as Class III by IMDRF, highly public information
network equipment including, without limitation, telephone exchange, and base station).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control
equipment, undersea equipment, military equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,
in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN.
Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
■
Information contained in this catalog is intended to convey examples of typical performances and/or applications
of our products and is not intended to make any warranty with respect to the intellectual property rights or any
other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.
■
Please note that the scope of warranty for our products is limited to the delivered our products themselves and
TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.
Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in
accordance with such agreement.
■
The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafter
“TAIYO
YUDEN’official sales channel” Please note that the contents of this
s
).
catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’official sales
s
channel.
■
Caution for Export
Some of our products listed in this catalog may require specific procedures for export according to
“U.S.
Export
Administration Regulations”
,
“Foreign
Exchange and Foreign Trade Control Law”of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.
・Mounting and soldering conditions should be checked beforehand.
・Applicable soldering process to these products is reflow soldering
W
Type
A
L
1608
0.55
T
C
MF1608
0.55
2012
0.60
e
2016
0.60
2518
0.60
A
B
A
3218
0.85
3225
0.85
only.
B
0.7
0.7
1.0
1.0
1.5
1.7
1.7
C
0.9
1.0
1.45
1.8
2.0
2.0
2.7
Unit：mm
Type
LB
1608
L
1.6±0.1
（0.063±0.004）
1.6±0.2
（0.063±0.008）
2.0±0.2
（0.079±0.008）
2.0±0.2
（0.079±0.008）
2.5±0.2
（0.098±0.008）
3.2±0.2
（0.126±0.008）
3.2±0.2
（0.126±0.008）
W
0.8±0.1
（0.031±0.004）
0.8±0.2
（0.031±0.008）
1.25±0.2
（0.049±0.008）
1.6±0.2
（0.063±0.008）
1.8±0.2
（0.071±0.008）
1.8±0.2
（0.071±0.008）
2.5±0.2
（0.098±0.008）
T
0.8±0.1
（0.031±0.004）
0.8±0.2
（0.031±0.008）
1.25±0.2
（0.049±0.008）
1.6±0.2
（0.063±0.008）
1.8±0.2
（0.071±0.008）
1.8±0.2
（0.071±0.008）
2.5±0.2
（0.098±0.008）
e
0.35±0.15
（0.014±0.006）
0.45±0.15
（0.016±0.006）
0.5±0.2
（0.020±0.008）
0.5±0.2
（0.020±0.008）
0.5±0.2
（0.020±0.008）
0.6±0.2
（0.024±0.008）
0.6±0.3
（0.024±0.012）
Standard quantity［pcs½
Paper tape
Embossed tape
4000
－
－
－
－
－
－
－
3000
3000
2000
2000
2000
1000
Unit：mm（inch）
LBMF1608
LB
LB
LB
LB
LB
LB
LB
LB
LB
2012
C2012
R2012
2016
C2016
2518
C2518
R2518
3218
LB C3225
i_wound_LB_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
1
9
89
■PARTS
NUMBER
●1608（0603）type
Parts number
LB
LB
LB
LB
LB
1608T1R0M
1608T2R2M
1608T4R7M
1608T8R2M
1608T100M
Parts number
LBMF1608T1R0M
LBMF1608T2R2M
LBMF1608T3R3M
LBMF1608T4R7M
LBMF1608T100[]
LBMF1608T220[]
LBMF1608T470[]
●2012（0805）type
Parts number
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
2012T1R0M
2012T2R2M
2012T3R3M
2012T4R7M
2012T6R8M
2012T100[]
2012T100[]R
2012T150[]
2012T220[]
2012T470[]
2012T680[]
2012T101[]
Parts number
LB
LB
LB
LB
LB
LB
C2012T1R0M
C2012T2R2M
C2012T4R7M
C2012T100[]
C2012T220[]
C2012T470[]
Parts number
LB
LB
LB
LB
LB
LB
LB
R2012T1R0M
R2012T2R2M
R2012T4R7M
R2012T100[]
R2012T220[]
R2012T470[]
R2012T101[]
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
［μH½
1.0
2.2
3.3
4.7
6.8
10
10
15
22
47
68
100
Nominal inductance
［μH½
1.0
2.2
4.7
10
22
47
Nominal inductance
［μH½
1.0
2.2
4.7
10
22
47
100
Inductance tolerance
±20％
±20％
±20％
±20％
±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
Inductance tolerance
±20％
±20％
±20％
±10％，±20％
±10％，±20％
±10％，±20％
Inductance tolerance
±20％
±20％
±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
Self-resonant frequency
［MH½½（min.）
100
80
55
45
38
32
32
28
16
11
10
8
Self-resonant frequency
［MH½½（min.）
100
70
45
40
16
11
Self-resonant frequency
［MH½½（min.）
100
80
45
32
16
11
8
DC Resistance
［Ω½（±30％）
0.15
0.23
0.30
0.40
0.47
0.70
0.50
1.3
1.7
3.7
6.0
7.0
DC Resistance
［Ω½（±30％）
0.19
0.33
0.50
1.2
3.7
5.8
DC Resistance
［Ω½（±30％）
0.07
0.13
0.24
0.36
1.0
1.7
4.0
Rated current
［mA½（max.）
405
260
235
190
135
120
120
100
80
60
50
45
Rated current
［mA½（max.）
620
430
295
200
130
90
Rated current
［mA½（max.）
400
260
200
150
100
75
50
Measuring frequency
［MHz½
7.96
7.96
7.96
7.96
7.96
2.52
2.52
2.52
2.52
2.52
2.52
0.796
Measuring frequency
［MHz½
7.96
7.96
7.96
2.52
2.52
2.52
Measuring frequency
［MHz½
7.96
7.96
7.96
2.52
2.52
2.52
0.796
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
［μH½
1.0
2.2
4.7
8.2
10
Nominal inductance
［μH½
1.0
2.2
3.3
4.7
10
22
47
Inductance tolerance
±20％
±20％
±20％
±20％
±20％
Inductance tolerance
±20％
±20％
±20％
±20％
±10％，±20％
±10％，±20％
±10％，±20％
Self-resonant frequency
［MH½½（min.）
100
80
45
32
32
Self-resonant frequency
［MH½½（min.）
100
80
60
45
32
16
11
DC Resistance
［Ω½（±30％）
0.17
0.33
0.55
0.70
0.70
DC Resistance
［Ω½（±30％）
0.09
0.17
0.22
0.24
0.36
1.0
2.5
Rated current
［mA½（max.）
160
115
70
60
60
Rated current
［mA½（max.）
230
160
130
110
80
50
35
Measuring frequency
［MHz½
7.96
7.96
7.96
2.52
2.52
Measuring frequency
［MHz½
7.96
7.96
7.96
7.96
2.52
2.52
2.52
INDUCTORS STANDARD INDUCTORS
／
90
●2016（0806）type
Parts number
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
・ []
EHS
Nominal inductance
［μH½
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
tolerance code（K or M）
Inductance tolerance
±20％
±20％
±20％
±20％
±20％
±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
Self-resonant frequency
［MH½½（min.）
100
80
70
55
45
38
32
28
16
14
11
10
8
DC Resistance
［Ω½（±30％）
0.09
0.11
0.13
0.20
0.25
0.35
0.50
0.70
1.0
1.7
2.4
3.0
4.5
Rated current
［mA½（max.）
490
380
375
285
225
200
155
130
105
85
70
55
40
Measuring frequency
［MHz½
7.96
7.96
7.96
7.96
7.96
7.96
2.52
2.52
2.52
2.52
2.52
2.52
0.796
RoHS
2016T1R0M
2016T1R5M
RoHS
2016T2R2M
RoHS
RoHS
2016T3R3M
2016T4R7M
RoHS
2016T6R8M
RoHS
2016T100[]
RoHS
2016T150[]
RoHS
2016T220[]
RoHS
2016T330[]
RoHS
2016T470[]
RoHS
2016T680[]
RoHS
2016T101[]
RoHS
Please specify the Inductance
LB/LBC series
Rated Current : The maximum DC value having inductance decrease within 10 % and temperature increase within 20 degC by the application of DC bias.
LBR series
Rated Current : The maximum DC value having inductance decrease within 20 % and temperature increase within 20 degC by the application of DC bias.
i_wound_LB_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
1
9
■PARTS
NUMBER
Parts number
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
C2016T1R0M
C2016T1R5M
C2016T2R2M
C2016T3R3M
C2016T4R7M
C2016T6R8M
C2016T100[]
C2016T150[]
C2016T220[]
C2016T330[]
C2016T470[]
C2016T680[]
C2016T101[]
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
［μH½
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
Inductance tolerance
±20％
±20％
±20％
±20％
±20％
±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
Self-resonant frequency
［MH½½（min.）
100
80
70
55
45
38
32
28
16
14
11
10
8
DC Resistance
［Ω½（±30％）
0.10
0.15
0.20
0.27
0.37
0.59
0.82
1.2
1.8
2.8
4.3
7.0
8.0
Rated current
［mA½（max.）
690
600
520
410
355
290
245
200
165
135
110
95
75
Measuring frequency
［MHz½
7.96
7.96
7.96
7.96
7.96
7.96
2.52
2.52
2.52
2.52
2.52
2.52
0.796
●2518（1007）type
Parts number
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
2518T1R0M
2518T1R5M
2518T2R2M
2518T3R3M
2518T4R7M
2518T4R7MR
2518T6R8M
2518T100[]
2518T150[]
2518T220[]
2518T330[]
2518T470[]
2518T680[]
2518T101[]
2518T151[]
2518T221[]
2518T331[]
2518T471[]
2518T681[]
2518T102[]
Parts number
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
C2518T1R0M
C2518T1R0MR
C2518T1R5M
C2518T2R2M
C2518T3R3M
C2518T4R7M
C2518T6R8M
C2518T100[]
C2518T150[]
C2518T220[]
C2518T330[]
C2518T470[]
C2518T680[]
C2518T101[]
C2518T151[]
C2518T221[]
C2518T331[]
C2518T471[]
C2518T681[]
Parts number
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
EHS
Nominal inductance
［μH½
1.0
1.5
2.2
3.3
4.7
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
Nominal inductance
［μH½
1.0
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
Nominal inductance
［μH½
1.0
2.2
4.7
10
22
47
100
tolerance code（K or M）
Inductance tolerance
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
Inductance tolerance
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
Inductance tolerance
±20％
±20％
±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
Self-resonant frequency
［MH½½（min.）
100
80
68
54
46
46
38
30
23
19
15
12
9.5
9.0
7.0
5.5
4.5
3.5
3.0
2.4
Self-resonant frequency
［MH½½（min.）
100
100
80
68
54
41
38
30
23
19
15
12
9.5
9.0
7.0
5.5
4.5
3.5
3.0
Self-resonant frequency
［MH½½（min.）
100
68
45
30
19
11
9
DC Resistance
［Ω½（±30％）
0.06
0.07
0.09
0.11
0.13
0.10
0.15
0.25
0.32
0.50
0.70
0.95
1.5
2.1
3.2
4.5
7.0
10
17
24
DC Resistance
［Ω½（±30％）
0.08
0.07
0.11
0.13
0.16
0.20
0.30
0.36
0.65
0.77
1.5
1.9
2.8
3.7
6.1
8.4
12.3
22
28
DC Resistance
［Ω½（±30％）
0.045
0.07
0.10
0.19
0.44
0.84
1.89
Rated current
［mA½（max.）
665
405
340
280
240
235
195
165
145
115
95
85
70
60
45
40
30
25
20
15
Rated current
［mA½（max.）
775
890
730
630
560
510
420
375
285
250
185
165
140
125
95
80
65
50
45
Rated current
［mA½（max.）
960
480
345
235
175
120
80
Measuring frequency
［MHz½
7.96
7.96
7.96
7.96
7.96
7.96
7.96
2.52
2.52
2.52
2.52
2.52
2.52
0.796
0.796
0.796
0.796
0.796
0.796
0.252
Measuring frequency
［MHz½
7.96
7.96
7.96
7.96
7.96
7.96
7.96
2.52
2.52
2.52
2.52
2.52
2.52
0.796
0.796
0.796
0.796
0.796
0.796
Measuring frequency
［MHz½
7.96
7.96
7.96
2.52
2.52
2.52
0.796
INDUCTORS STANDARD INDUCTORS
／
LB R2518T1R0M
RoHS
LB R2518T2R2M
RoHS
LB R2518T4R7M
RoHS
LB R2518T100[]
RoHS
LB R2518T220[]
RoHS
LB R2518T470[]
RoHS
LB R2518T101[]
RoHS
・ [] Please specify the Inductance
LB/LBC series
Rated Current : The maximum DC value having inductance decrease within 10 % and temperature increase within 20 degC by the application of DC bias.
LBR series
Rated Current : The maximum DC value having inductance decrease within 20 % and temperature increase within 20 degC by the application of DC bias.
i_wound_LB_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
1
9
91
■PARTS
NUMBER
●3218（1207）type
Parts number
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
LB
3218T1R0M
3218T1R5M
3218T2R2M
3218T3R3M
3218T4R7M
3218T6R8M
3218T100[]
3218T150[]
3218T220[]
3218T330[]
3218T470[]
3218T680[]
3218T101[]
3218T151[]
3218T221[]
3218T331[]
3218T471[]
3218T681[]
3218T102[]
EHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
Nominal inductance
［μH½
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
Inductance tolerance
±20％
±20％
±20％
±20％
±20％
±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
Self-resonant frequency
［MH½½（min.）
100
80
68
54
41
40
30
25
19
15
12
11
8.0
7.0
5.0
4.0
3.5
3.0
2.4
DC Resistance
［Ω½（±30％）
0.06
0.07
0.09
0.11
0.13
0.17
0.25
0.32
0.49
0.75
0.92
1.49
2.4
3.2
5.4
7.0
14
17
27
Rated current
［mA½（max.）
1,075
860
775
560
550
380
340
300
255
215
205
145
140
105
80
65
54
45
39
Measuring frequency
［MHz½
7.96
7.96
7.96
7.96
7.96
7.96
2.52
2.52
2.52
2.52
2.52
2.52
0.796
0.796
0.796
0.796
0.796
0.796
0.252
INDUCTORS STANDARD INDUCTORS
／
92
●3225（1210）type
Parts number
EHS
Nominal inductance
［μH½
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
tolerance code（K or M）
Inductance tolerance
±20％
±20％
±20％
±20％
±20％
±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
±10％，±20％
Self-resonant frequency
［MH½½（min.）
250
220
190
160
70
50
23
20
17
13
10
8
6
DC Resistance
［Ω½（±30％）
0.055
0.060
0.080
0.095
0.100
0.120
0.133
0.195
0.27
0.41
0.67
1.0
1.4
Rated current
［mA½（max.）
1,100
1,000
930
820
680
620
540
420
330
300
220
190
150
Measuring frequency
［MHz½
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
LB C3225T1R0MR
RoHS
LB C3225T1R5MR
RoHS
LB C3225T2R2MR
RoHS
LB C3225T3R3MR
RoHS
LB C3225T4R7MR
RoHS
LB C3225T6R8MR
RoHS
LB C3225T100[]R
RoHS
LB C3225T150[]R
RoHS
LB C3225T220[]R
RoHS
LB C3225T330[]R
RoHS
LB C3225T470[]R
RoHS
LB C3225T680[]R
RoHS
LB C3225T101[]R
RoHS
・ [] Please specify the Inductance
LB/LBC series
Rated Current : The maximum DC value having inductance decrease within 10 % and temperature increase within 20 degC by the application of DC bias.
i_wound_LB_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
