AS85049/141
90°
Lipped Low Profile Heat Shrink Boot
B
AS85049
Basic
Part Number
H Dia
Dash
Number
Table I
Material
Table II
See Note 2
Drain Holes
Omit for None
M85049/141
-
10
H
Adhesive
C
D
P
Injection Vent-Ports
Omit for None
C
= Adhesive Lined
U
= No Adhesive
Table III
P
Optional Ø.120 (3.05)
Drain Holes
JW
(4 Places, 90° Apart and on Top)
H
R
J Dia
S
As Recovered
with Drain Holes
J Dia
See
Note 2
.120 Ref
(3.05)
T
HW
H Dia
Optional
Ø.120 (3.05)
Vent Port
As Supplied
Optional
Ø.180 (4.57)
Injection Port
RR
PP
H
As Recovered
with Injection-Vent Port
See
Note 2
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
Mil-Spec Backshells
U.S. CAGE Code 06324
Rev. 8.29.14
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
B-152
E-Mail: sales@glenair.com
AS85049/141
90°
Lipped Low Profile Heat Shrink Boot
TABLE I: Dash Number and Dimensions (Continued Below)
H Dia
J Dia Min
J Dia Max
J Dia
P
R
Max
(As Supplied)
(As Supplied)
Max
(As Recovered) (As Recovered)
(As Recovered) Material A, B, H
Material G
(As Recovered)
±10%
Ref
0.450 (11.4)
0.590 (15.0)
0.740 (18.8)
0.900 (22.9)
1.160 (29.5)
1.340 (34.0)
1.620 (41.1)
1.850 (47.0)
2.350 (59.7)
2.640 (67.1)
0.880 (22.4)
1.010 (25.7)
1.160 (29.5)
1.340 (34.0)
1.470 (37.3)
1.720 (43.7)
1.970 (50.0)
2.470 (62.7)
2.730 (69.3)
3.220 (81.8)
0.550 (14.0)
0.630 (16.0)
0.720 (18.3)
0.840 (21.3)
0.910 (23.1)
1.070 (27.2)
1.240 (31.5)
1.540 (39.1)
1.700 (43.2)
2.010 (51.1)
0.250 (6.4)
0.300 (7.6)
0.330 (8.4)
0.390 (9.9)
0.430 (10.9)
0.480 (12.2)
0.570 (14.5)
0.710 (18.0)
0.790 (20.1)
0.910 (23.1)
4.140 (105.2)
4.880 (124.0)
5.760 (146.3)
6.780 (172.2)
7.290 (185.2)
8.410 (213.6)
8.840 (224.5)
8.950 (227.3)
9.190 (233.4)
9.330 (237.0)
0.730 (18.5)
0.780 (19.8)
0.820 (20.8)
0.860 (21.8)
0.960 (24.4)
1.080 (27.4)
1.160 (29.5)
1.310 (33.3)
1.380 (35.1)
1.750 (44.5)
Dash
No.
09
10
11
12
13
14
15
16
17
18
H Dia
Min
(As Supplied)
0.880 (22.4)
1.010 (25.7)
1.160 (29.5)
1.340 (34.0)
1.470 (37.3)
1.720 (43.7)
1.970 (50.0)
2.470 (62.7)
2.730 (69.3)
3.220 (81.8)
B
TABLE I: Dash Number and Dimensions (Continued from Above)
T
HW
JW
S
PP
RR
Dash
(As Recovered) (As Recovered)
Max
(As Recovered) (As Recovered) (As Recovered)
No.
Ref
±20%
(As Recovered)
±10%
±10%
±10%
09
10
11
12
13
14
15
16
17
18
0.040 (1.0)
0.040 (1.0)
0.040 (1.0)
0.040 (1.0)
0.070 (1.8)
0.070 (1.8)
0.070 (1.8)
0.080 (2.0)
0.080 (2.0)
0.080 (2.0)
0.060 (1.5)
0.060 (1.5)
0.070 (1.8)
0.070 (1.8)
0.080 (2.0)
0.080 (2.0)
0.090 (2.3)
0.100 (2.5)
0.100 (2.5)
0.100 (2.5)
0.060 (1.5)
0.060 (1.5)
0.060 (1.5)
0.060 (1.5)
0.060 (1.5)
0.060 (1.5)
0.060 (1.5)
0.060 (1.5)
0.060 (1.5)
0.060 (1.5)
0.470 (11.9)
0.470 (11.9)
0.470 (11.9)
0.470 (11.9)
0.470 (11.9)
0.470 (11.9)
0.470 (11.9)
0.630 (16.0)
0.630 (16.0)
0.630 (16.0)
0.270 (6.9)
0.330 (8.4)
0.410 (10.4)
0.480 (12.2)
0.610 (15.5)
0.720 (18.3)
0.830 (21.1)
0.950 (24.1)
1.180 (30.0)
1.310 (33.3)
0.490 (12.4)
0.590 (15.0)
0.610 (15.5)
0.620 (15.7)
0.700 (17.8)
0.780 (19.8)
0.820 (20.8)
0.920 (23.4)
0.930 (23.6)
1.230 (31.2)
TABLE II: Shrink Boot Materials
Material Compound
Code
A
B
G
H
2071
2040
2010
2025
Material Description
Flexible Polyolefin
General Purpose Polyolefin
Zero Halogen Polyolefin
High Performance Elastomer
Color
Code
WHITE
RED
GREEN
BLUE
TABLE III: Adhesive Description
Symbol
C
Adhesive Description
Zero Halogen / Hot Melt
APPLICATION NOTES
1.
See bag identification for matching boot
number, not number on boot. See part number
development for full description.
Encircled material letter designator located
on O.D. approximately mid length along the
“J” end. See part number development for full
description.
Metric dimensions (mm) are in parentheses.
2.
3.
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
Mil-Spec Backshells
U.S. CAGE Code 06324
Rev. 8.29.14
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
B-153
E-Mail: sales@glenair.com
AS85049
瑞萨电子MCU
