MAN02
MAN15
MAN30
Manometer
Users Manual
• Mode d’emploi
• Bedienungshandbuch
• Manual d’Uso
• Manual de uso
MAN02
MAN15
MAN30
Manometer
Users Manual
MAN02_15_30 Rev001
© 2009 Amprobe Test Tools.
All rights reserved.
English
Limited Warranty and Limitation of Liability
Your Amprobe product will be free from defects in material and workmanship for 1 year from the
date of purchase. This warranty does not cover fuses, disposable batteries or damage from accident,
neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling.
Resellers are not authorized to extend any other warranty on Amprobe’s behalf. To obtain service
during the warranty period, return the product with proof of purchase to an authorized Amprobe
Test Tools Service Center or to an Amprobe dealer or distributor. See Repair Section for details.
ThiS wARRANTY iS YoUR oNlY ReMedY. All oTheR wARRANTieS - wheTheR expReSS, iMplied
oR STAUToRY - iNClUdiNg iMplied wARRANTieS of fiTNeSS foR A pARTiCUlAR pURpoSe oR
MeRChANTAbiliTY, ARe heRebY diSClAiMed. MANUfACTUReR ShAll NoT be liAble foR ANY
SpeCiAl, iNdiReCT, iNCideNTAl oR CoNSeqUeNTiAl dAMAgeS oR loSSeS, ARiSiNg fRoM ANY
CAUSe oR TheoRY. Since some states or countries do not allow the exclusion or limitation of an
implied warranty or of incidental or consequential damages, this limitation of liability may not apply
to you.
Repair
All test tools returned for warranty or non-warranty repair or for calibration should be accompanied
by the following: your name, company’s name, address, telephone number, and proof of purchase.
Additionally, please include a brief description of the problem or the service requested and include
the test leads with the meter. Non-warranty repair or replacement charges should be remitted in the
form of a check, a money order, credit card with expiration date, or a purchase order made payable
to Amprobe® Test Tools.
please read the warranty statement and check your battery before requesting repair. during the
warranty period any defective test tool can be returned to your Amprobe® Test Tools distributor
for an exchange for the same or like product. please check the “where to buy” section on www.
amprobe.com for a list of distributors near you. Additionally, in the United States and Canada in-
warranty repair and replacement units can also be sent to a Amprobe® Test Tools Service Center (see
address below).
In-Warranty Repairs and Replacement – All Countries
Non-Warranty Repairs and Replacement – US and Canada
Non-warranty repairs in the United States and Canada should be sent to a Amprobe® Test Tools
Service Center. Call Amprobe® Test Tools or inquire at your point of purchase for current repair and
replacement rates.
In USA
Amprobe Test Tools
everett, wA 98203
Tel: 877-AMpRobe (267-7623)
In Canada
Amprobe Test Tools
Mississauga, oN l4Z 1x9
Tel: 905-890-7600
Non-Warranty Repairs and Replacement – Europe
european non-warranty units can be replaced by your Amprobe® Test Tools distributor for a nominal
charge. please check the “where to buy” section on www.amprobe.com for a list of distributors near
you.
European Correspondence Address*
Amprobe
®
Test Tools europe
in den engematten 14
79286 glottertal, germany
Tel.: +49 (0) 7684 8009 - 0
*(Correspondence only – no repair or replacement available from this address. european customers
please contact your distributor.)
3
MANOMETER
HOLD
DIF DATALOGGER
REC
MAX MIN BAT
inH
2
O psi
mbar
bar
mmH2O
1
3
5
2
4
6
➊
oN/off pushbutton
➋
Record pushbutton
➌
data hold pushbutton
➍
differential pushbutton
➎
Unit Selector pushbutton
➏
backlight pushbutton
12
10
11
13
2
4
MANOMETER
➊
primary data screen displays pressure value
➋
“-” Minus pressure display
➌
MAx MiN pressure recorded
➍
ReC starts recording mode and displays
max./min. pressure recorded
HOLD
DIF DATALOGGER
1
REC
MAX MIN BAT
inH
2
O psi
mbar
bar
mmH2O
3
7
8
6
➎
dC power input jack
➏
USb output port (USb cable not included)
➐
h/M/S 88:88:88 displays time in hour/
Minute/Second
9
indicator
5
➑
pressure unit indication
➒
bAT low battery indicator
➓
dif differential pressure mode
“+” positive pressure connection input
“-” Negative pressure connection input
data hold freezes pressure reading
4
MAN02 / MAN15 / MAN30 Manometer
CoNtENtS
INtRoDUCtIoN
...................................................................................................................................2
FEAtURES
.............................................................................................................................................2
StANDARD ACCESSoRIES
...................................................................................................................2
QUICK StARt
.......................................................................................................................................3
AUto PoWER oFF
...............................................................................................................................3
oPERAtIoN MoDE
..............................................................................................................................3
CALIBRAtIoN MoDE
...........................................................................................................................4
Calibration point reference...........................................................................................................5
MANUAL ZERo SEttING
.....................................................................................................................5
tRoUBLE SHootING
...........................................................................................................................5
Replacing The battery ...................................................................................................................6
USB PC INtERFACE CAPABILItIES
.......................................................................................................6
download Suite Software installation .........................................................................................6
operation .......................................................................................................................................6
MAINtENANCE
....................................................................................................................................7
Cleaning .........................................................................................................................................7
SPECIFICAtIoNS
...................................................................................................................................7
operating Conditions ....................................................................................................................7
1
