型号
- 型号
- 关键词
8-BIT, OTPROM, 2.1MHz, MICROCONTROLLER, PDIP40, DIP-40
器件类别：嵌入式处理器和控制器 微控制器和处理器
厂商名称：Motorola ( NXP )
厂商官网：https://www.nxp.com
下载文档| 型号 | MC68HC705C5P | MC68HC705C5CP | MC68HC705C5CFN |
|---|---|---|---|
| 描述 | 8-BIT, OTPROM, 2.1MHz, MICROCONTROLLER, PDIP40, DIP-40 | 8-BIT, OTPROM, 2.1MHz, MICROCONTROLLER, PDIP40, DIP-40 | Microcontroller, 8-Bit, OTPROM, 2.1MHz, HCMOS, PQCC44, PLASTIC, LCC-44 |
| 厂商名称 | Motorola ( NXP ) | Motorola ( NXP ) | Motorola ( NXP ) |
| 包装说明 | DIP, DIP40,.6 | DIP, | QCCJ, |
| Reach Compliance Code | unknown | unknown | unknown |
| 具有ADC | NO | NO | NO |
| 位大小 | 8 | 8 | 8 |
| 最大时钟频率 | 4.2 MHz | 4.2 MHz | 4.2 MHz |
| DAC 通道 | NO | NO | NO |
| DMA 通道 | NO | NO | NO |
| JESD-30 代码 | R-PDIP-T40 | R-PDIP-T40 | S-PQCC-J44 |
| 长度 | 52.07 mm | 52.07 mm | 16.5862 mm |
| I/O 线路数量 | 32 | 32 | 32 |
| 端子数量 | 40 | 40 | 44 |
| 最高工作温度 | 70 °C | 85 °C | 85 °C |
| 最低工作温度 | - | -40 °C | -40 °C |
| PWM 通道 | NO | NO | NO |
| 封装主体材料 | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY |
| 封装代码 | DIP | DIP | QCCJ |
| 封装形状 | RECTANGULAR | RECTANGULAR | SQUARE |
| 封装形式 | IN-LINE | IN-LINE | CHIP CARRIER |
| 认证状态 | Not Qualified | Not Qualified | Not Qualified |
| ROM可编程性 | OTPROM | OTPROM | OTPROM |
| 座面最大高度 | 5.08 mm | 5.08 mm | 4.57 mm |
| 速度 | 2.1 MHz | 2.1 MHz | 2.1 MHz |
| 最大供电电压 | 5.5 V | 5.5 V | 5.5 V |
| 最小供电电压 | 4.5 V | 4.5 V | 4.5 V |
| 标称供电电压 | 5 V | 5 V | 5 V |
| 表面贴装 | NO | NO | YES |
| 技术 | HCMOS | HCMOS | HCMOS |
| 温度等级 | COMMERCIAL | INDUSTRIAL | INDUSTRIAL |
| 端子形式 | THROUGH-HOLE | THROUGH-HOLE | J BEND |
| 端子节距 | 2.54 mm | 2.54 mm | 1.27 mm |
| 端子位置 | DUAL | DUAL | QUAD |
| 宽度 | 15.24 mm | 15.24 mm | 16.5862 mm |
| uPs/uCs/外围集成电路类型 | MICROCONTROLLER | MICROCONTROLLER | MICROCONTROLLER |
| 零件包装代码 | DIP | DIP | - |
| 针数 | 40 | 40 | - |