Magnetostrictive Linear-Position Sensors
M-Series Mobile Equipment Sensor
Model MH
Analog Output
Temposonics
®
®
SENS
O
RS
550824 I
Product Specification
Cable Exit
Wire Exit
M-Series (Model MH)
sensor connection options
M-Series (Model MH) with analog output
(sensor cylinder application example)
Features
Linear, Absolute Position Sensors
Non-contact Sensor Technology
Superior Accuracy: Linearity < +/- 0.04% F.S.
Repeatability: < ± 0.005% F.S.
Compact Design for Embedded Cylinder Applications
No External Electronics
Analog Output: 0.25 - 4.75 Vdc, 4-20 mA
Sensor Stroke Length: 50 mm (1.97 in.) - 2500 mm (98.43 in.)
Power Supply: 12/24 Vdc
Shock Rating: 100 g (single hit) / IEC 68-2-27
Vibration Rating: 25 g / 10-2000 Hz / IEC 68-2-6
Benefits of magnetostrictive sensing
Temposonics linear-position sensors use the time based
magnetostrictive position sensing principle developed by MTS. Within
the sensing element, a sonic strain pulse is induced in a specially
designed magnetostrictive waveguide by the momentary interaction
of two magnetic fields. One field comes from a movable permanent
magnet that passes along the outside of the sensor. The other field
comes from an “interrogation” current pulse applied along the wave-
guide. The resulting strain pulse travels at ultrasonic speed along the
waveguide and is detected at the head of the sensing element.
The position of the magnet is determined with high precision and
speed by accurately measuring the elapsed time between the applica-
tion of the interrogation pulse and the arrival of the resulting strain
pulse with a high-speed counter. Elapsed time is used to determine
the permanent magnet position which provides an absolute position
reading that never requires recalibration or re-homing after a power
loss. Non-contact sensing eliminates wear, and guarantees the best
durability and output repeatability.
Product overview
Today’s buyers are more concerned with greater productivity,
lower overall operating costs and cost of ownership. Temposonics
M-Series Mobile Equipment sensors help lower overall costs by
increasing safety and versatility, increasing reliability and reducing
service costs. Temposonics Mobile Equipment sensors are designed
specifically for position sensing applications in rugged environments
typically encountered by construction, agriculture and other off-
highway machinery. All Temposonics Mobile Equipment sensors
utilize magnetostrictive technology.
The M-Series, Model MH sensor with analog output, is one of the
latest compact stainless-steel position sensors specifically designed
for use in welded and tie-rod style cylinders, or any space limited cyl-
inder application. The M-Series Model MH sensor is an ideal choice
for a wide range of standard hydraulic cylinders with diameters of 50
mm (1.97 in.) or larger.
The extremely rugged model MH sensor consists of the following
main components:
1. The sensor head; A robust housing with built-in electronics.
2. The pressure-proof sensor pipe; The sensor pipe houses and
protects the internal sensing element.
3. The position magnet; The magnet is mounted on the piston, during
operation it travels along the stationary sensor tube. This sensor
system is “non-contact” by design.
All specifications are subject to change. Contact MTS for specifications and engineering
drawings that are critical to your application. Drawings contained in this document are
for reference only. Go to www.mtssensors.com for the latest support documentation.
M-Series Model MH Analog Sensor product specifications and dimensions
Temposonics Model MH high-pressure compact sensor
M-Series sensors were designed with the “mobile” world in mind, and
have been validated in the field by customers worldwide. Performance
is second-to-none; high accuracy, repeatability, 200 V/m EMI, and
position output.
Ruggedness is “designed in”; 100 g shock and 25 g vibration rating.
Cable and wire options are sized for direct connection to industry
proven connectors. The model MH sensor is fully sealed and when
embedded in a cylinder provides a long operating life.
Parameters
Measured variations:
Resolution:
Linearity, uncorrected:
Repeatability:
Update frequency:
Ripple:
Stroke length:
Outputs:
Parameters
Rod pressure ratings
10 mm (0.39 in.) rod:
7 mm (0.27 in.) rod:
Electrical connection:
Voltage input:
EMC tests:
Specifications
350 bar (5076 psi) operating, 530 bar (7687 psi)
peak pressure
300 bar (4351 psi) operating, 450 bar (6526 psi)
peak pressure
Individual 4-wire (optional M12 connector) or
Pigtailed PUR cable
12/24 Vdc (10 to 32 Vdc)
200V/m:
ISO 11452-5
ISO 14982, Agriculture and forest machines
ISO 7637-0/1/2/3, Road vehicles
DIN EN 50121-3-2:5/2001, Railway applications
IEC 61000-6-1/2 - CE
100 g (single hit) /IEC 68-2-27
100 g (single hit) /IEC 68-2-27
25 g RMS/
10 - 2000 Hz/IEC 68-2-6
15 g RMS/
10 - 2000 Hz/IEC 68-2-8
80 mA typical
500 Vdc (DC ground to machine ground)
Up to -36 Vdc
Up to 36 Vdc
Stainless steel 1.4301/AISI 304
Specifications
Displacement
0.1 mm
<± 0.04% F.S. minimum ± 0.100 mm (0.003 in.)
<± 0.005% F.S.
> 488 Hz
< 0.05% F.S.
50 mm - 2500 mm (1.97 - 98.43 in.)
in 5 mm (0.19 in.) increments
Analog: 0.25 - 4.75 Vdc, 4 - 20 mA, output rabge
factory programmable through entire stroke,
fully reversible
-40 °C (-40 °F) to 105 °C (221 °F) (sensor)
90% rel. humidity, no condensation
IP 67 (individual wires); IP 67 (cable exit)
Shock ratings
10 mm (0.39 in.) rod:
7 mm (0.27 in.) rod:
Vibration ratings
10 mm (0.39 in.) rod:
7 mm (0.27 in.) rod:
Current drain:
Electrical isolation:
Polarity protection:
Overvoltage protection:
Sensor material:
Operating temperature:
Dew point, humidity:
Sealing:
Temposonics Model MH sensor dimensions
9 mm
(0.29 in.)
23 mm
(0.91 in.) dia.
Null
30 mm (1.18 in.)
Stroke length
50 mm (1.97 in.) to
2500 mm (98.43 in.)
Dead zone
64 mm (2.52 in.)
30 mm
(1.18 in.) dia.
48 f7 (1.89 in.)
dia.
21 mm
(0.83 in.)
23 mm
(0.91 in.)
31 mm
(1.22 in.)
12 mm
(0.47 in.) dia.
24 mm (0.94 in.) dia.
11 mm (0.43 in.)
7 mm (0.28 in.) or
10 mm (0.39 in.) dia.
12 mm
(0.47 in.) dia.
Null
30 mm (1.18 in.)
Stroke length
50 mm (1.97 in.) to
2500 mm (98.43 in.)
Dead zone
64 mm (2.52 in.)
30 mm
(1.18 in.) dia.
48 f7
(1.89 in.) dia.
21 mm
(0.83 in.)
23 mm
(0.91 in.)
33 mm
(1.30 in.)
24 mm (0.94 in.) dia.
11 mm (0.43 in.)
7 mm (0.28 in.) or
10 mm (0.39 in.) dia.
Notes:
Contact factory for tolerance drawing and cavity detail.
2
MTS Sensors
M-Series Model MH, Analog Output Sensor - Specification 550824 I
M-Series Model MH Analog Sensor installation, wiring examples and magnets
The robust Temposonics Model MH sensor’s new stainless-steel position sensor is designed for direct stroke measurement in standard compact
hydraulic cylinders. The Temposonics Model MH sensor can be installed from the head side or the rod side of the cylinder depending on the
cylinder design.
Sensor installation
The method of installation is entirely dependent on the cylinder design. While the most common method of installation is from the rod side of
the cylinder, installation from the head side of the cylinder is also possible. In both installation methods, the sensor seals the cylinder by using
an O-Ring and backup ring which is installed on the sensor housing.
Temposonics Model MH sensor installation examples
Rod-side installation
Retaining screw with set screw DIN 914
M5 x 10 maximum torque 0.5 Nm
(0.369 lbf-ft. / 4.43 lbf-in.) or
UNF/UNC equivalent
5.5 mm (0.22 in.)
Zone for set screw
Cylinder head, side installation
1 mm (0.04 in.)
3.5 mm (0.14 in.)
7.5 mm (0.29 in.)
Detail flange housing
4 mm
(0.16 in.)
45
o
2.5 mm
(0.10 in.)
Wiring diagram (standard configuration)
Wire color
Green
Brown
White
Yellow
Signal
Position output
12/24 Vdc
DC ground
N/C
M12 Pin posi-
tion
4
2
3
1
4
1
3
2
Position magnets
Part no. 201542-2
Temperature:
-40°C (-40 °F) to
105 °C (221 °F)
Material: Ferrite PA
Thickness 8 mm
(0.31 in.)
4 mm (0.17 in.)
dia. 4 places
13.5 mm
(0.55 in.) dia.
33 mm
(1.29 in.) dia.
MTS Sensors
Part no. 400633
Magnet spacer
(use with magnet
part no. 201542-2)
Thickness 3 mm
(0.13 in.) dia.
4 places
Part no. 400533
Temperature:
-40°C (-40 °F) to
105 °C (221 °F)
Material: Ferrite PA
Thickness 8 mm
(0.31 in.)
Part no. 401032
Temperature:
-40°C (-40 °F) to
105 °C (221 °F)
Material: Ferrite PA
Thickness 8 mm
(0.31 in.)
13.5 mm
(0.53 in.) dia.
32 mm
(1.26 in.) dia.
14 mm
(0.56 in.) dia.
13.5 mm
(0.53 in.) dia.
25 mm
(1.0 in.) dia.
17 mm
(0.68 in.) dia.
3
M-Series Model MH, Analog Output Sensor - Specification 550824 I
M-Series Model MH Analog sensor How to order and accessories
When placing an order, build the desired model number using the model number guide (right). If you have any questions about how to apply a
model MH position sensor to your specific application, please contact MTS Applications Engineering.
M H
1
2
3
4
5
6
7
M
8
9
10
11
12
3
13
14
15
16
MH
C
D
=
=
=
SENSOR MODEL
Hydraulic rod-style
48 mm (1.89 in.) dia. housing
PRESSURE PIPE
10 mm (0.39 in.) diameter
7 mm (0.28 in.) diameter
STROKE LENGTH (order length)
Millimeters 50 mm to 2500 mm (1.97 in. to 98.43 in.)
in 5 mm (0.19 in.) increments)
CONNECTION TYPE
Wire exit:
Integral “single wires”, each conductor is 0.5 mm
2
(20 AWG)
Wire lengths:
10
= 100 mm (3.94 in.) length
20
= 200 mm (7.07 in.) length
30
= 300 mm (11.81 in.) length
Wire length: first digit x 100 mm / second digit x 10 mm
Termination type:
A
= Pigtail (stripped conductors)
(Note: For wire termination, consult factory)
E
= M12 integrated connector M12x1 for MH-Analog and MH PWM, A-polarization, 4-pin 4-wires,
PIN1-N.C. - yellow, PIN2 - supply-brown, PIN3 - ground-white, PIN4 - signal-green.
____M
=
N___
=
T_ _
=
Cable exit:
4 conductor / cable; Integral PUR cable, pigtailed, 4 cables, shielded
Cable length (first digit x 1m., second digit x 0.1 m.)
10
= 1.0 m. length (standard, all other lengths require minimum order quantities;
0.5 m. min. to 9.9 m. max.; 0.1 m. increments)
Termination type:
A
= Pigtail (stripped conductors)
(Note: For wire termination, consult factory)
INPUT VOLTAGE
+
12/24 Vdc
OUTPUT
Voltage:
0.25 to 4.75 Vdc
0.5 to 4.5 Vdc
4.75 to 0.25 Vdc
4.5 to 0.5 Vdc
Current:
4 to 20 mA
3
=
V11
V12
V13
V14
A01
=
=
=
=
=
Accessories
Description
Ring magnet
Ring magnet
Ring magnet
Magnet spacer (use with magnet part no. 201542-2)
M12 Flange
Part no.
201542-2
400533
401032
400633
253769
Part Number: 03-08, 04-09, 550824 Revision I
MTS and Temposonics, and are registered trademarks of MTS Systems Corporation.
All other trademarks are the property of their respective owners.
All Temposonics sensors are covered by US patent number 5,545,984. Additional patents are pending.
Printed in USA. Copyright © 2008, 2009 MTS Systems Corporation. All Rights Reserved in all media.
®
SENS
O
RS
UNITED STATES
MTS Systems Corporation
Sensors Division
3001 Sheldon Drive
Cary, NC 27513
Tel: (800) 633-7609
Fax: (919) 677-0200
(800) 498-4442
www.mtssensors.com
sensorsinfo@mts.com
GERMANY
MTS Sensor Technologie
GmbH & Co. KG
Auf dem Schüffel 9
D - 58513 Lüdenscheid
Tel: +49 / 23 51 / 95 87-0
Fax: +49 / 23 51 / 56 491
www.mtssensor.de
info@mtssensor.de
JAPAN
MTS Sensors Technology
Corporation
Ushikubo Bldg.
737 Aihara-cho, Machida-shi
Tokyo 194-0211, Japan
Tel: +81 (42) 775 / 3838
Fax: +81 (42) 775 / 5516
www.mtssensor.co.jp
info@mtssensor.co.jp
嵌入式系统
