型号
  • 型号
  • 关键词
首页 > 器件类别 > 无源元件

MHQ0402P2N9BT000

Fixed Inductors 01005 2.9nH +/-0.1nH M/L Super High-Q NRW

器件类别：无源元件   

厂商名称：TDK(株式会社)

厂商官网：http://www.tdk.com

器件标准：

下载文档
参数 预览
MHQ0402P2N9BT000 在线购买

供应商：

器件：MHQ0402P2N9BT000

价格：-

最低购买：-

库存：点击查看

点击购买

器件参数
参数名称
属性值
Product Attribute
Attribute Value
制造商
Manufacturer
TDK(株式会社)
产品种类
Product Category
Fixed Inductors
RoHS
Details
端接类型
Termination Style
SMD/SMT
屏蔽
Shielding
Shielded
电感
Inductance
2.9 nH
容差
Tolerance
0.1 nH
最大直流电流
Maximum DC Current
200 mA
最大直流电阻
Maximum DC Resistance
400 mOhms
最小工作温度
Minimum Operating Temperature
- 55 C
最大工作温度
Maximum Operating Temperature
+ 125 C
Q Minimum
10
测试频率
Test Frequency
500 MHz
封装 / 箱体
Package / Case
0402
长度
Length
0.44 mm
宽度
Width
0.24 mm
高度
Height
0.24 mm
应用
Application
RF
系列
Packaging
Cut Tape
系列
Packaging
MouseReel
系列
Packaging
Reel
芯体材料
Core Material
Ceramic
产品
Product
Fixed Inductors
自谐振频率
Self Resonant Frequency
8.3 GHz
工厂包装数量
Factory Pack Quantity
20000
文档预览
I N D U C T O R S
April 2017
Inductors for high frequency circuits
Multilayer ceramic
MHQ-P series
MHQ0402P
type
MHQ0402P
0402 [01005 inch]*
* Dimensions code JIS[EIA]
(2/17)
I N D U C T O R S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this product.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-
ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-
ment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-
ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment  
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.
20170412 / inductor_commercial_high-frequency_mhq0402p_en.fm
(3/17)
I N D U C T O R S
Inductors for high frequency circuits
Multilayer ceramic
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
Overview of MHQ0402P series
FEATURES
Unique ceramic material and configuration allows for the realization of high Q characteristics that are equivalent to that of air core wound
inductors.
Multilayer method allows for a lineup with fine increments of inductance.
APPLICATION
Smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners and other high fre-
quency circuits for the mobile communication industry
PART NUMBER CONSTRUCTION
MHQ
Series name
0402
L×W×H dimensions
(mm)
0402
0.44×0.24×0.24
P
Characteristics
P
0N2
Inductance
(nH)
0N6
0.6
1N1
1.1
11N
11
B
Inductance
tolerance
B
±0.1nH
C
±0.2nH
S
±0.3nH
H
±3%
J
±5%
T
T
Packaging style
Taping
000
Internal code
000
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature ranges
Type
Operating
temperature
（°C）
–55 to +125
Storage
temperature*
（°C）
–55 to +125
Package quantity
(pieces/reel)
20000
Individual weight
（mg）
0.11
MHQ0402P

The storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details. https://product.tdk.com/info/en/environment/rohs/index.html
Halogen-free: indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170412 / inductor_commercial_high-frequency_mhq0402p_en.fm
(4/17)
I N D U C T O R S
MHQ0402P type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Peak
Natural
cooling
T4
T:
Temperature
T3
T3
T2
T1
t1
t3
t2
t:
Time
Preheating
Temp.
T1
T2
150°C
180°C
Time
t1
60 to 120s
Soldering
Temp.
Time
T3
t2
230°C
30 to 60s
Peak
Temp.
T4
250 to 260°C
Time
t3
10s max.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170412 / inductor_commercial_high-frequency_mhq0402p_en.fm
(5/17)
I N D U C T O R S
MHQ0402P type
SHAPE & DIMENSIONS
0.24±0.02
0.08typ.
0.44±0.02
0.08typ.
0.11±0.03
0.24±0.02
0.11±0.03
Dimensions in mm
RECOMMENDED LAND PATTERN
0.18 to 0.20
0.20
0.15 to 0.20
0.15 to 0.20
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170412 / inductor_commercial_high-frequency_mhq0402p_en.fm
查看更多>
如何提高光耦的关断速度
这个电路本来是用来当作开关的一直使用没有什么问题 现在想用这个电路来驱动步进电机驱动器，需要PWM波...
程序会不会 模拟电子
直线电机驱动电路种如何限压到1V
最近做了一个音圈电机的驱动电路，为了保证电机不被异常信号烧毁，必须将电压限制在1V以内。市场...
傅里叶的猫 模拟电子
2013年全国大学生电子设计竞赛本科组题目（官网下载的）
各位参赛者： 附官网下载的2013年全国大学生电子设计竞赛本科组题目A~G题。 是...
fengxin 电子竞赛
该电路为音频放大，求大神解读
求大神指导下C14，C15，R27，R28在电路中的作用 该电路为音频放大，求大神解读 U4A反相...
xiaolong1231 模拟电子
模拟电台报时电路
本帖最后由 jameswangsynnex 于 2015-3-3 19:54 编辑 模拟...
探路者 移动便携
蚂蚁矿机S9控制板原理图
蚂蚁矿机S9控制板原理图 good sechematic good 资料，呵呵呵呵...
littleshrimp EE_FPGA学习乐园
热门器件
热门资源推荐
MTK GPS 资料 在类unix中可以方便使用的读写配置文件的接口。 一本学习OSG必备的电子书籍 苹果iPhone3GS电路图.pdf 这是用来测试44BO电路板有关硬件的测试程序 这是一个抽奖小程序 这是一个抽奖小程序 这是一个抽奖小程序 LINUX设备驱动程序 中国电力出版社ISBN 7-5083-0221-4 高精度低成本超声波热能表的研制 基于MATLAB的间接测量数据处理 PIC单片机应用问答14篇
CC254X在作为设备端时，能否在与主机绑定的时候得到主端输入的密码(包括错误的密码)？ ZwQueryInformationFile取全路径的问题 关于PNG图片读取失败问题 AD原理图和与原理图库的区别？ 一个N多共享单车的智能锁汇总，很详细啊！ FPGA频率影响问题 触摸屏检测时中断截取不到的原因，高手进来看看 ARM专家入内－编译链接相关 经典的移动通信流程实物图 电池过压保护和防反接电路对不对？
PIC单片机控制的遥控防盗报警器电路 红外线探测报警器 使用ESP8266从NTP服务器获取时间并在OLED显示器上显示 开关电源的基本组成及工作原理 用NE555制作定时器 RS-485基础知识:处理空闲总线条件的两种常见方法 如何构建一个触摸传感器电路 如何调制IC555振荡器 基于ICL296的大电流开关稳压器电源电路 基于TDA2003的简单低功耗汽车立体声放大器电路
器件捷径:
E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ
需要登录后才可以下载。
登录取消