CAN BOARD
™
Manual
Additional Board
MikroElektronika
All Mikroelektronika’s development systems feature a large number of peripheral
modules expanding microcontroller’s range of application and making the
process of program testing easier. In addition to these modules, it is also
possible to use numerous additional modules linked to the development system
through the I/O port connectors. Some of these additional modules can operate
as stand-alone devices without being connected to the microcontroller.
CAN additional board
The CAN additional board is used to connect a development system to devices that use CAN communication.
Key features:
- Supports 1Mb/s operation;
- Power supply in a range between 4.5 and 5.5V DC; and
- Low power consumption.
Figure 1:
CAN additional board
Figure 2:
The back side of the CAN board
How to connect the board?
The CAN additional board is connected to a development system via a 2x5 connector CN1 on the additional board and a 2x5
connector on the development system. The DIP switch SW1 is used to determine which port pins on the development system will be
used for CAN communication. Depending on the development system in use, it is necessary to set the appropriate switches on the
DIP switch SW1 to the ON position, table 1.
Development system/pin CAN-RX
EasyPIC6
EasydsPIC6
BIGAVR
Table 1
SW1/ON
P2
P0
P6
CAN-TX
RB2
RF1, RG1
RF1
PD5
SW1/ON
P3
P1
P1
P5
RB3
RF0
PD6
dsPICPRO4, BIGdsPIC6 RF0, RG0 P0
Figure 3:
CAN additional board connection schematic
MikroElektronika
Figure 4:
CAN additional board connected to a development system
Figure 5:
Dimensions of the additional board
MikroElektronika
MikroElektronika
If you want to learn more about our products, please visit our website at www.mikroe.com
If you are experiencing some problems with any of our products or just need additional information, please place your ticket at
www.mikroe.com/en/support
If you have any questions, comments or business proposals, do not hesitate to contact us at office@mikroe.com
模拟电子
