Contacts:
Pins: BeCu alloy strip per ASTM B194
Sockets: Brass per ASTM B121 / B121M or ASTM B16 / B16M or
ASTM B453
Gold plate per ASTM B488
Aluminum Alloy 6061-T6 per SAE AMS-QQ-A-250/11 or 6061-T6511
per SAE AMS-QQ-A-200/8
or
Stainless Steel 300 series per ASTM A484 / A484M and ASTM A582 / A582M
Passivated per SAE AMS2700
Electroless Nickel per SAE AMS2404, Class 3, 500 " min
Electrodeposited Cadmium per SAE AMS-QQ-P-416, Type II, Class 3
Black Anodized per MIL-A-8625, Type III, Class 2
Gold per MIL-DTL-45204, Type II, Grade C, Class 0
Glass filled polyphenylene sulfide per MIL-M-24519
Frey Engineering Co. insulating compound CF3003-80 and L-II-49 or equivalent
Corrosion resistant steel per ASTM A320 or ASTM A484 / A484M and ASTM A582 / A582M
Passivated per SAE AMS2700
Corrosion resistant steel per ASME 18.24 or NASM35333 or ASTM A484/A484M and
ASTM A582/A582M (For reference only: ASME 18.24 CRS per ASTM A693 and
NASM35333 CRS per ASTM A240)
Passivated per ASME 18.24 or NASM35333 or SAE AMS2700
(For reference only: ASME 18.24 and NASM35333 passivated per SAE AMS2700)
Corrosion resistant steel per ASTM A484 / A484M and ASTM A582 / A582M
Passivated per SAE AMS2700
Beryllium copper in accordance with ASTM B194
Electroless Nickel plate per SAE AMS2404
Fluorosilicone per SAE AMS-R-25988
Unless otherwise specified: Fractions = ±1/64"
Decimals = ±.010"
Angles = ±5°
Wire lengths: insulated/stranded = +1.0"/-0.0"
uninsulated/solid = +0.2"/-0.0"
Contact Finish:**
Shells:
Aluminum
Shell Finishes:**
Molded Insulators:
Embedment:
Jackscrews,
Jackposts and Nuts:
Clips and Washers:
Guide Pins
Latches
Interfacial
Seal Gaskets:
Tolerances:**
Note: AirBorn can manufacture special configurations for your exact specifications.
* = Reference the above listed specifications or an equivalent industry standard when applicable
** = When ordering to Mil Spec P/N, Mil Spec requirements apply
Ask About AirBorn's Accelerated Delivery Service
下载中心专版
