MN101C62D,MN101C62D pdf中文资料,MN101C62D引脚图,MN101C62D电路-Datasheet-电子工程世界

文档预览

MN101C62D , MN101C62F

Type

ROM (× 8-bit)

RAM (× 8-bit)

Package

Minimum Instruction

Execution Time

MN101C62D [ES (Engineering Sample) available]

64 K

LQFP080-P-1414A

*Lead-free

Standard: 0.10

µs

(at 4.5 V to 5.5 V, 20 MHz)

0.25

µs

(at 2.7 V to 5.5 V, 8 MHz)

1.00

µs

(at 2.0 V to 5.5 V, 2 MHz)*

125

µs

(at 2.0 V to 5.5 V, 32 kHz)*

Double speed:

0.125

µs

(at 4.5 V to 5.5 V, 8 MHz)

0.25

µs

(at 3.0 V to 5.5 V, 4 MHz)

62.5

µs

(at 2.0 V to 5.5 V, 32 kHz)*

MN101C62F (under development)

96 K

* The lower limit for operation guarantee for flash memory built-in type is 2.5 V.

Interrupts

• Watchdog • External 0 • External 1 • External 2 • External 3 • External 4 • Timer 0 • Timer 1 • Timer 2

•Timer 3 • Timer 4 • Timer 6 • Time base • Timer 7 (2 systems) • Timer 8 (2 systems) • Automatic transfer completion

• Serial 0 (2 systems) • Serial 1 (2 systems) • Serial 2 • A/D conversion finish • Key interrupt

Timer Counter

Timer counter 0 : 8-bit

(square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width

measurement)

Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation

clock frequency; 1/1 of XI oscillation clock frequency; external clock input

Interrupt source ················ coincidence with compare register 0

Timer counter 1 : 8-bit

1 (square-wave output, event count, synchronous output event, serial baud rate timer)

Clock source ····················· 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC

oscillation clock frequency; 1/1 of XI oscillation clock frequency; external

clock input

Interrupt source ················ coincidence with compare register 1

Timer counter 0, 1 can be cascade-connected.

Timer counter 2 : 8-bit

(square-wave output, event count, sychronous output event, simple pulse width measurement, generation of real

time, serial baud rate timer)

Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation

clock frequency; 1/1 of XI oscillation clock frequency; external clock input

Interrupt source ················ coincidence with compare register 2

Timer counter 3 : 8-bit

(square-wave output, event count, generation of remote control carrier, serial baud rate timer)

Clock source ····················· 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC

oscillation clock frequency; 1/1 of XI oscillation clock frequency; external

clock input

Interrupt source ················ coincidence with compare register 3

Timer counter 2, 3 can be cascade-connected.

Timer counter 4 : 8-bit

(square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width

measurement)

Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation

clock frequency; 1/1 of XI oscillation clock frequency; external clock input

Interrupt source ················ coincidence with compare register 0

Timer counter 6 : 8-bit freerun timer

Clock source ····················· 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock

frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency

Interrupt source ················ coincidence with compare register 6

MAD00020EEM

MN101C62D, MN101C62F

Timer Counter

(Continue)

Timer counter 7 : 16-bit

(square-wave output, 16-bit PWM output (cycle / duty continuous variable), event count, synchronous output

evevt, pulse width measurement, input capture, generation of real time)

Clock source ····················· 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC

oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency

Interrupt source ················ coincidence with compare register 7 (2 lines)

Watchdog timer

Interrupt source ················ 1/65536, 1/262144, 1/1048576 of system clock frequency

Timer counter 8 : 16-bit

(square-wave output, 16-bit PWM output (cycle / duty continuous variable), event count, synchronous output

evevt, pulse width measurement, input capture, generation of real time)

Clock source ····················· 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC

oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency

Interrupt source ················ coincidence with compare register 7 (2 lines)

Watchdog timer

Interrupt source ················ 1/65536, 1/262144, 1/1048576 of system clock frequency

Serial Interface

Serial 0 : synchronous type/UART (full-duplex)

Clock source ····················· 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2;

1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency

Serial 1 : synchronous type/UART (full-duplex)

Clock source ····················· 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3;

1/2,1/8 of timer counter 2 output;

1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency

Serial 2 : synchronous type / single-master I

Clock source ····················· 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3;

1/2, 1/4, 1/8, 1/32 of OSC oscillation clock frequency

I/O Pins

A/D Inputs

Special Ports

I/O

• Common use • Specified pull-up resistor available • Input/output selectable (bit unit)

10-bit

8-ch. (with S/H)

Buzzer output, remote control carrier signal output, high-current drive port

Electrical Characteristics

Supply current

Limit

Parameter

Symbol

IDD1

Operating supply current

IDD2

IDD3

Supply current at HALT

IDD4

Supply current at STOP

IDD5

IDD6

fx = 32 kHz, VDD = 3 V, Ta = 85°C

VDD = 5 V, Ta = 25°C

VDD = 5 V, Ta = 85°C

fx = 32 kHz, VDD = 3 V

fx = 32 kHz, VDD = 3 V, Ta = 25°C

Condition

min

fosc = 20 MHz, VDD = 5 V

typ

max

µA

Unit

See the next page for pin assignment and support tool.

MAD00020EEM

Pin Assignment

P35/SBT0B

P47/KEY7

P46/KEY6

P45/KEY5

P44/KEY4

P43/KEY3

P42/KEY2

P41/KEY1

P64/A04

P65/A05

P66/A06

P67/A07

P70SD00/A08

P71/SD01/A09

P72/SD02/A10

P73/SD03/A11

P74/SD04/A12

P75/SD05/A13

P76/SD06/A14

P77/SD07/A15

P87/LED7/D7

P86/LED6/D6

P85/LED5/D5

P84/LED4/D4

P83/LED3/D3

P82/LED2/D2

P81/LED1/D1

P80/LED0/D0

P40/KEY0

P50/NWE

P51/NRE

P52/NCS

P63/A03

P62/A02

P61/A01

P60/A00

P54/A17

P53/A16

VDD2

VSS2

TM8I0/RXD0B/SBI0B/P34

TM4I0/TXD0B/SB00B/P33

SCL/SBT2/P32

SBI2/P31

SDA/SB02/P30

IRQ4/P24

IRQ3/P23

IRQ2/P22

ACZ/IRQ1/P21

IRQ0/P20

TM7I0/P14

TM3I0/P13

TM2I0/P12

TM1I0/P11

RMOUT/TMOI0/P10

NDK/BUZZER/P06

SBT1/P05

RXD1/SBI1/P04

TXD1/SB01/P03

SBT0A/P02

MN101C62D

MN101C62F

TXD0A/SB00A/P00

VSS3

AN0/PA0

AN1/PA1

AN2/PA2

AN3/PA3

AN4/PA4

AN5/PA5

AN6/PA6

AN7/PA7

VDD1

OSC2

OSC1

VSS1

NRST/P27

LQFP080-P-1414A

*Lead-free

Support Tool

In-circuit Emulator

Flash Memory Built-in Type

PX-ICE101C / D + PX-PRB101C62-LQFP080-P-1414A-M (under development)

Type

ROM (× 8-bit)

RAM (× 8-bit)

Minimum instruction execution time

MN101CF62G (under development)

128 K

10 K

0.1

µs

(at 4.5 V to 5.5 V, 20 MHz)

0.25

µs

(at 3.0V to 5.5 V, 8 MHz)

62.5

µs

(at 3.0 V to 5.5 V, 32 kHz)

Package

LQFP080-P-1414A

*Lead-free

RXD0A/SBI0A/P01

VREF+

MM0D

MAD00020EEM

MN101C62D , MN101C62F

MAD00020EEM

Request for your special attention and precautions in using the technical information

and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government

if any of the products or technologies described in this material and controlled under the "Foreign

Exchange and Foreign Trade Law" is to be exported or taken out of Japan.

(2) The technical information described in this material is limited to showing representative characteris-

tics and applied circuits examples of the products. It neither warrants non-infringement of intellec-

tual property right or any other rights owned by our company or a third party, nor grants any license.

(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the

product or technologies as described in this material.

(4) The products described in this material are intended to be used for standard applications or general

electronic equipment (such as office equipment, communications equipment, measuring instru-

ments and household appliances).

Consult our sales staff in advance for information on the following applications:

•

Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,

combustion equipment, life support systems and safety devices) in which exceptional quality and

reliability are required, or if the failure or malfunction of the products may directly jeopardize life or

harm the human body.

•

Any applications other than the standard applications intended.

(5) The products and product specifications described in this material are subject to change without

notice for modification and/or improvement. At the final stage of your design, purchasing, or use of

the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that

the latest specifications satisfy your requirements.

(6) When designing your equipment, comply with the guaranteed values, in particular those of maxi-

mum rating, the range of operating power supply voltage, and heat radiation characteristics. Other-

wise, we will not be liable for any defect which may arise later in your equipment.

Even when the products are used within the guaranteed values, take into the consideration of

incidence of break down and failure mode, possible to occur to semiconductor products. Measures

on the systems such as redundant design, arresting the spread of fire or preventing glitch are

recommended in order to prevent physical injury, fire, social damages, for example, by using the

products.

(7) When using products for which damp-proof packing is required, observe the conditions (including

shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets

are individually exchanged.

(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written

permission of Matsushita Electric Industrial Co., Ltd.

2002 JUL