型号
- 型号
- 关键词
Disk Drive Motor Controller, CMOS, PDIP64, 0.750 INCH, SHRINK, PLASTIC, DIP-64
器件类别：其他集成电路（IC） 信号电路
厂商名称：Panasonic(松下)
厂商官网：http://www.panasonic.co.jp/semicon/e-index.html
下载文档| 型号 | MN73534PXE | MN6790S | MN6790 | AN3126SB | MN73045PXH |
|---|---|---|---|---|---|
| 描述 | Disk Drive Motor Controller, CMOS, PDIP64, 0.750 INCH, SHRINK, PLASTIC, DIP-64 | Consumer Circuit, CMOS, PDSO14, 0.225 INCH, PLASTIC, SOP-14 | Consumer Circuit, CMOS, PDIP14, 0.300 INCH, PLASTIC, DIP-14 | Modulator | Microprocessor Circuit, CMOS, PQFP124, 28 X 28 MM, PLASTIC, QFP-124 |
| Reach Compliance Code | unknown | unknown | unknown | unknown | unknown |
| 零件包装代码 | DIP | SOIC | DIP | - | QFP |
| 包装说明 | SDIP, | SOP, | DIP, | - | QFP, |
| 针数 | 64 | 14 | 14 | - | 124 |
| JESD-30 代码 | R-PDIP-T64 | R-PDSO-G14 | R-PDIP-T14 | - | S-PQFP-G124 |
| 长度 | 58.4 mm | 10.1 mm | 19.05 mm | - | 28 mm |
| 功能数量 | 1 | 1 | 1 | - | - |
| 端子数量 | 64 | 14 | 14 | - | 124 |
| 封装主体材料 | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | - | PLASTIC/EPOXY |
| 封装代码 | SDIP | SOP | DIP | - | QFP |
| 封装形状 | RECTANGULAR | RECTANGULAR | RECTANGULAR | - | SQUARE |
| 封装形式 | IN-LINE, SHRINK PITCH | SMALL OUTLINE | IN-LINE | - | FLATPACK |
| 认证状态 | Not Qualified | Not Qualified | Not Qualified | - | Not Qualified |
| 座面最大高度 | 4.65 mm | 1.9 mm | 4.95 mm | - | 3.9 mm |
| 最大供电电压 (Vsup) | 5.25 V | 5.5 V | 5.5 V | - | - |
| 最小供电电压 (Vsup) | 4.75 V | 4.5 V | 4.5 V | - | - |
| 表面贴装 | NO | YES | NO | - | YES |
| 技术 | CMOS | CMOS | CMOS | - | CMOS |
| 端子形式 | THROUGH-HOLE | GULL WING | THROUGH-HOLE | - | GULL WING |
| 端子节距 | 1.778 mm | 1.27 mm | 2.54 mm | - | 0.8 mm |
| 端子位置 | DUAL | DUAL | DUAL | - | QUAD |
| 宽度 | 19.05 mm | 4.2 mm | 7.62 mm | - | 28 mm |
| Base Number Matches | 1 | 1 | 1 | - | - |