Fiber Optic Mode Conditioning Patch Cable
(ST/LC), 10M (33-ft.)
MODEL NUMBER:
N422-10M
Highlights
q
10 Meter LC/ST Mode
Conditioning Cable
q
62.5/125 and 8.3/125
Run 1000Base-LX Gigabit
Ethernet over MMF by offsetting
signal loss
q
q
IEEE 802.3z Gigabit Ethernet
Compliant
Package Includes
q
10 Meter LC/ST Mode
Conditioning Cable
Description
Tripp Lites Mode Conditioning Cables are designed for use in Gigabit Ethernet 1000BASE-LX
applications. They are fully compliant with IEEE 802.3z application standards. Mode Conditioning Cables
are needed in applications where new high-speed Gigabit 1000BASE-LX routers and switches are being
deployed into existing multimode plants. The need for this patch cord is due to the single-mode launch
nature of the -LX or long-wave (1300 nm) transceiver modules used for Gigabit Ethernet. Launching a
single-mode laser into the center of a multimode fiber can cause multiple signals to be generated that
confuses the receiver at the other end of the fiber. These multiple signals, caused by Differential Mode
Delay (DMD) effects, severely limit the cable distance lengths for operating Gigabit Ethernet. A mode
conditioning patch cord eliminates these multiple signals by allowing the single-mode launch to be offset
away from the center of a multimode fiber.
Features
q
Use Singlemode Transceivers on Multimode Fiber Backbones
62.5/125 and 8.3/125
Offsets the Singlemode Laser launch from the center of a Multimode fiber
Available in a variety of connector combinations
q
q
q
Specifications
OVERVIEW
UPC Code
037332127280
INPUT
Cable Length (ft.)
Cable Length (m)
32.8
10
1/2
PHYSICAL
Shipping Dimensions (hwd / in.)
Shipping Dimensions (hwd / cm)
Shipping Weight (lbs.)
Shipping Weight (kg)
Color
9.00 x 7.00 x 0.50
22.86 x 17.78 x 1.27
0.31
0.14
Orange; Yellow
CONNECTIONS
Side A - Connector 1
Side B - Connector 1
LC DUPLEX (MALE)
ST DUPLEX (MALE)
FEATURES & SPECIFICATIONS
Technology
Mode Conditioning
WARRANTY
Product Warranty Period
(Worldwide)
Lifetime limited warranty
© 2018 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
2/2
