Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■
Product information in this catalog is as of October 2017. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual product specification sheets.
■
Please contact TAIYO YUDEN for further details of product specifications as the individual product specification
sheets are available.
■
Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
■
The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment), medical
equipment classified as Class I or II by IMDRF, industrial equipment, and automotive interior applications, etc.
Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which
may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment,
medical equipment classified as Class III by IMDRF).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control
equipment, undersea equipment, military equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,
in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN.
Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
■
Information contained in this catalog is intended to convey examples of typical performances and/or applications
of our products and is not intended to make any warranty with respect to the intellectual property rights or any
other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.
■
Please note that the scope of warranty for our products is limited to the delivered our products themselves and
TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.
Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in
accordance with such agreement.
■
The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafter
“TAIYO
YUDEN’official sales channel” Please note that the contents of this
s
).
catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’official sales
s
channel.
■
Caution for Export
Some of our products listed in this catalog may require specific procedures for export according to
“U.S.
Export
Administration Regulations”
,
“Foreign
Exchange and Foreign Trade Control Law”of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.
1
8
SMD
POWER INDUCTORS (NR SERIES H TYPE/S TYPE/V
TYPE/V TYPE)
SMD
POWER INDUCTORS(NR SERIES H TYPE/S
TYPE)
REFLOW
REFLOW
AEC-Q200
AEC-Q200
■PART
NUMBER
*Operating Temp. :
-40½125℃（Including self-generated heat）
N
R △
①
4
0
②
1
8
T △
③
Series name
1
0 0
④
M △ V
⑤ ⑥ ⑦
△＝Blank space
①Series name
Code
NRH
NRS
NRV
②Dimensions（L×W×H）
Code
2010
2012
2410
2412
3010
3012
3015
4010
4012
4018
5010
5012
5014
5020
5024
5030
5040
6010
6012
6014
6020
6028
6045
8030
8040
③Packaging
Code
T△
④Nominal inductance
Code
（example）
2R2
100
101
※R＝Decimal point
⑤Inductance tolerance
Code
M
N
⑥Special code
Code
△
⑦Internal code
Code
V
Packaging
Taping
Coating resin specification
Nominal inductance［μ
H½
2.2
10
100
Dimensions（L×W×H）［mm½
2.0×2.0×1.0
2.0×2.0×1.2
2.4×2.4×1.0
2.4×2.4×1.2
3.0×3.0×1.0
3.0×3.0×1.2
3.0×3.0×1.5
4.0×4.0×1.0
4.0×4.0×1.2
4.0×4.0×1.8
4.9×4.9×1.0
4.9×4.9×1.2
4.9×4.9×1.4
4.9×4.9×2.0
4.9×4.9×2.4
4.9×4.9×3.0
4.9×4.9×4.0
6.0×6.0×1.0
6.0×6.0×1.2
6.0×6.0×1.4
6.0×6.0×2.0
6.0×6.0×2.8
6.0×6.0×4.5
8.0×8.0×3.0
8.0×8.0×4.0
INDUCTORS POWER INDUCTORS
Inductance tolerance
±20％
±30％
／
Special code
Standard
Internal code
Inductor for Industrial and Automotive
■STANDARD
EXTERNAL DIMENSIONS / STANDARD QUANTITY
Recommended Land Patterns
L
H
e
B
C
W
f
e
A
A
Type
NRV2010
NRV2012, NRS2012
NRH2410
NRH2412
NRH3010
NRH3012, NRV3012
NRS3015
NRS4010
NRS4012
NRS4018
NRS8030
NRS8040
A
0.65
0.7
0.8
B
1.35
1.45
2.2
C
2.0
2.0
2.7
1.2
1.8
2.8
5.6
3.7
7.5
Unit：mm
Type
NRV2010
NRV2012
NRS2012
NRH2410
NRH2412
L
2.0±0.1
(0.079±0.004)
2.0±0.1
(0.079±0.004)
2.4±0.1
(0.095±0.00)
2.4±0.1
(0.095±0.004)
W
2.0±0.1
(0.079±0.004)
2.0±0.1
(0.079±0.004)
2.4±0.1
(0.095±0.004)
2.4±0.1
(0.095±0.004)
H
1.0 max
（0.039 max）
1.2 max
（0.047 max）
1.0 max
（0.039 max）
1.2 max
（0.047 max）
e
0.5±0.2
（0.024±0.008）
0.5±0.2
（0.024±0.008）
0.6±0.2
（0.024±0.008）
0.6±0.2
（0.024±0.008）
f
1.25±0.2
（0.050±0.008）
1.25±0.2
（0.050±0.008）
1.45±0.2
（0.057±0.008）
1.45±0.2
（0.057±0.008）
Standard quantity
[pcs] Taping
2500
2500
2500
2500
hq_i_smd_NR_e-E06R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
1
8
41
NRH3010
NRH3012
NRV3012
NRS3015
NRS4010
NRS4012
NRS4018
NRS8030
3.0±0.1
（0.118±0.004）
3.0±0.1
（0.118±0.004）
3.0±0.1
（0.118±0.004）
4.0±0.2
（0.157±0.008）
4.0±0.2
（0.157±0.008）
4.0±0.2
（0.157±0.008）
8.0±0.2
（0.315±0.008）
8.0±0.2
（0.315±0.008）
3.0±0.1
（0.118±0.004）
3.0±0.1
（0.118±0.004）
3.0±0.1
（0.118±0.004）
4.0±0.2
（0.157±0.008）
4.0±0.2
（0.157±0.008）
4.0±0.2
（0.157±0.008）
8.0±0.2
（0.315±0.008）
8.0±0.2
（0.315±0.008）
NRS8040
1.0 max
（0.039 max）
1.2 max
（0.047 max）
1.5 max
（0.059 max）
1.0 max
（0.039 max）
1.2 max
（0.047 max）
1.8 max
（0.071 max）
3.0 max
（0.118 max）
*1） 4.2 max
（0.165 max）
*2） 4.0 max
（0.157 max）
0.9±0.2
（0.035±0.008）
0.9±0.2
（0.035±0.008）
0.9±0.2
（0.035±0.008）
1.1±0.2
（0.043±0.008）
1.1±0.2
（0.043±0.008）
1.1±0.2
（0.043±0.008）
1.60±0.3
（0.063±0.012）
1.60±0.3
（0.063±0.012）
1.9±0.2
（0.075±0.008）
1.9±0.2
（0.075±0.008）
1.9±0.2
（0.075±0.008）
2.5±0.2
（0.098±0.008）
2.5±0.2
（0.098±0.008）
2.5±0.2
（0.098±0.008）
5.6±0.3
（0.22±0.012）
5.6±0.3
（0.22±0.012）
2000
2000
2000
5000
4500
3500
1000
1000
Unit：mm（inch）
*1） 0R9½6R8 type,
*2） 100½101type
L
H
e
ΔI
Recommended Land Patterns
INDUCTORS POWER INDUCTORS
／
42
B
C
W
e
f
A
A
Type
NRS5010
NRS5012
NRS5014
NRS5020
NRS5024
NRS5030
NRS5040
NRS6010
NRS6012
NRS6014
NRS6020
NRS6028
NRS6045
A
B
C
1.5
3.6
4.0
1.6
4.7
5.7
Unit：mm
Type
NRS5010
NRS5012
NRS5014
NRS5020
L
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
W
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
H
1.0 max
（0.039 max）
1.2 max
（0.047 max）
1.4 max
（0.055 max）
2.0 max
（0.079 max）
*3) 2.5 max
（0.098 max）
*4) 2.4 max
(0.094 max)
*5) 3.1 max
（0.122 max）
*6) 3.0 max
(0.118 max)
*7） 4.1 max
（0.161 max）
*8） 4.0 max
（0.157 max）
1.0 max
（0.039 max）
1.2 max
（0.047 max）
1.4 max
（0.055 max）
2.0 max
（0.079 max）
2.8 max
（0.110 max）
4.5 max
（0.177 max）
e
1.2±0.2
（0.047±0.008）
1.2±0.2
（0.047±0.008）
1.2±0.2
（0.047±0.008）
1.2±0.2
（0.047±0.008）
1.2±0.2
（0.047±0.008）
f
3.3±0.2
（0.130±0.008）
3.3±0.2
（0.130±0.008）
3.3±0.2
（0.130±0.008）
3.3±0.2
（0.130±0.008）
3.3±0.2
（0.130±0.008）
ΔI
1.3typ
（0.051typ）
1.3typ
（0.051typ）
1.3typ
（0.051typ）
1.3typ
（0.051typ）
1.3typ
（0.051typ）
Standard quantity
[pcs] Taping
1000
1000
1000
800
2500
NRS5024
NRS5030
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
1.2±0.2
（0.047±0.008）
3.3±0.2
（0.130±0.008）
1.3typ
（0.051typ）
500
NRS5040
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
1.2±0.2
（0.047±0.008）
1.35±0.2
（0.053±0.008）
1.35±0.2
（0.053±0.008）
1.35±0.2
（0.053±0.008）
1.35±0.2
（0.053±0.008）
1.35±0.2
（0.053±0.008）
1.35±0.2
（0.053±0.008）
3.3±0.2
（0.130±0.008）
4.0±0.2
（0.157±0.008）
4.0±0.2
（0.157±0.008）
4.0±0.2
（0.157±0.008）
4.0±0.2
（0.157±0.008）
4.0±0.2
（0.157±0.008）
4.0±0.2
（0.157±0.008）
1.3typ
（0.051typ）
2.3typ
（0.091typ）
2.3typ
（0.091typ）
2.3typ
（0.091typ）
2.3typ
（0.091typ）
2.3typ
（0.091typ）
2.3typ
（0.091typ）
1500
6.0±0.2
6.0±0.2
（0.236±0.008） （0.236±0.008）
6.0±0.2
6.0±0.2
NRS6012
（0.236±0.008） （0.236±0.008）
6.0±0.2
6.0±0.2
NRS6014
（0.236±0.008） （0.236±0.008）
6.0±0.2
6.0±0.2
NRS6020
（0.236±0.008） （0.236±0.008）
6.0±0.2
6.0±0.2
NRS6028
（0.236±0.008） （0.236±0.008）
6.0±0.2
6.0±0.2
NRS6045
（0.236±0.008） （0.236±0.008）
*3) 1R0½1R5 type,
*4) 2R2½330 type
*5) R47½100 type,
*6) 150½470 type
*7） 1R5½100 type,
*8） 150½470 type
NRS6010
1000
1000
1000
2500
2000
1500
Unit：mm（inch）
hq_i_smd_NR_e-E06R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
1
8
■PART
NUMBER
・ All the SMD Power Inductors of the catalog lineup are RoHS compliant.
Note)
・ The exchange of individual specifications is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
・ *1: Automotive（AEC-Q200 Qualified) products
AEC-Q200
＜ ：AEC-Q200 qualified＞
All the SMD Power Inductors of *1 marks are tested based on the test conditions and methods defined in AEC-Q200 by family item.
Please consult with TAIYO YUDEN’s official sales channel for the details of the product specification and AEC-Q200 test results, etc.,
and please review and approve TAIYO YUDEN's product specification before ordering.
・ *2: Industrial products and Medical products
●NRV2010
type
Part number
NRV2010T R47N GFV
NRV2010T R68N GFV
NRV2010T 1R0N GFV
NRV2010T 1R5M GFV
NRV2010T 2R2M GFV
NRV2010T 3R3M GFV
NRV2010T 4R7M GFV
●NRV2012
type
Part number
NRV2012T 1R0N GFV
NRV2012T 1R5N GFV
NRV2012T 2R2M GFV
NRV2012T 3R3M GFV
NRV2012T 4R7M GFV
●NRS2012
Shielded type
Part number
NRS2012T 1R0N GJV
NRS2012T 1R5N GJV
NRS2012T 2R2M GJV
NRS2012T 3R3M GJV
NRS2012T 4R7M GJV
●NRH2410
Shielded type
Part number
NRH2410T R68NN 4V
NRH2410T 1R0NN 4V
NRH2410T 1R5MN V
NRH2410T 2R2MN V
NRH2410T 3R3MN V
NRH2410T 4R7MN V
NRH2410T 6R8MN V
NRH2410T 100MN V
NRH2410T 150MN V
NRH2410T 220MN V
●NRH2412
Shielded type
Part number
NRH2412T R47NNGJV
NRH2412T 1R0NNGHV
NRH2412T 1R5NNGHV
NRH2412T 2R2MNGHV
NRH2412T 3R3MNGHV
NRH2412T 4R7MNGHV
NRH2412T 6R8MNGHV
NRH2412T 100MNGHV
Nominal inductance
［μH½
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
Inductance tolerance
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
Self-resonant
frequency
［MH½½（min.）
180
101
89
72
56
45
34
29
DC Resistance
［Ω½（±20％）
0.050
0.077
0.100
0.140
0.225
0.300
0.420
0.600
Rated current ※） ［½A½
Measuring
Saturation current
Temperature rise current
frequency［kHz½
Idc2
Idc1
2,900
2,100
100
2,350
1,300
100
2,100
1,150
100
1,700
1,000
100
1,400
750
100
1,150
650
100
950
550
100
810
450
100
Note
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
Nominal inductance
［μH½
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
Inductance tolerance
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Self-resonant
frequency
［MH½½（min.）
120
106
94
77
56
50
43
32
27
22
DC Resistance
［Ω½（±20％）
0.060
0.070
0.110
0.150
0.220
0.290
0.410
0.690
1.02
1.47
Rated current ※） ［½A½
Measuring
Saturation current
Temperature rise current
frequency［kHz½
Idc2
Idc1
2,200
1,570
100
1,800
1,410
100
1,550
1,160
100
1,290
970
100
1,000
770
100
880
670
100
750
570
100
550
450
100
470
370
100
390
300
100
Note
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
Nominal inductance
［μH½
1.0
1.5
2.2
3.3
4.7
Inductance tolerance
±30％
±30％
±20％
±20％
±20％
Self-resonant
frequency
［MH½½（min.）
-
-
-
-
-
DC Resistance
［Ω½（±20％）
0.070
0.090
0.107
0.190
0.241
Rated current ※） ［½A½
Measuring
Saturation current
Temperature rise current
frequency［kHz½
Idc2
Idc1
1,900
1,700
100
1,650
1,500
100
1,350
1,370
100
1,000
1,020
100
900
910
100
Note
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
Nominal inductance
［μH½
1.0
1.5
2.2
3.3
4.7
Inductance tolerance
±30％
±30％
±20％
±20％
±20％
Self-resonant
frequency
［MH½½（min.）
-
-
-
-
-
DC Resistance
［Ω½（±20％）
0.073
0.100
0.129
0.227
0.325
Rated current ※） ［½A½
Measuring
Saturation current
Temperature rise current
frequency［kHz½
Idc2
Idc1
2,200
1,650
100
1,800
1,400
100
1,600
1,200
100
1,250
900
100
1,100
750
100
Note
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
Nominal inductance
［μH½
0.47
0.68
1.0
1.5
2.2
3.3
4.7
Inductance tolerance
±30％
±30％
±30％
±20％
±20％
±20％
±20％
Self-resonant
frequency
［MH½½（min.）
-
-
-
-
-
-
-
DC Resistance
［Ω½（±20％）
0.052
0.060
0.080
0.100
0.175
0.250
0.320
Rated current ※） ［½A½
Measuring
Saturation current
Temperature rise current
frequency［kHz½
Idc2
Idc1
2,100
2,000
100
1,850
1,850
100
1,550
1,600
100
1,350
1,450
100
1,100
1,100
100
880
1,000
100
760
820
100
Note
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
INDUCTORS POWER INDUCTORS
／
※
） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
hq_i_smd_NR_e-E06R01
1
8
43
■PART
NUMBER
●NRH3010
Shielded type
Part number
NRH3010T 1R2NN V
NRH3010T 1R5NN V
NRH3010T 2R2MN V
NRH3010T 3R3MN V
NRH3010T 4R7MN V
NRH3010T 6R8MN V
NRH3010T 100MN V
NRH3010T 150MN V
NRH3010T 220MN V
NRH3010T 470MN V
●NRH3012
Shielded type
Part number
NRH3012T R47NN V
NRH3012T 1R0NN V
NRH3012T 1R5NN V
NRH3012T 2R2MN V
NRH3012T 3R3MN V
NRH3012T 4R7MN V
NRH3012T 6R8MN V
NRH3012T 100MN V
NRH3012T 150MN V
NRH3012T 220MN V
●NRV3012
Shielded type
Part number
NRV3012T 1R0N V
NRV3012T 1R5N V
NRV3012T 2R2M V
NRV3012T 3R3M V
NRV3012T 4R7M V
NRV3012T 6R8M V
NRV3012T 100M V
●NRS3015
Shielded type
Part number
NRS3015T 1R0NNGHV
NRS3015T 1R5NNGHV
NRS3015T 2R2MNGHV
NRS3015T 3R3MNGHV
NRS3015T 4R7MNGHV
NRS3015T 6R8MNGHV
NRS3015T 100MNGHV
NRS3015T 220MNGHV
●NRS4010
Shielded type
Part number
NRS4010T 1R0NDGGV
NRS4010T 2R2MDGGV
NRS4010T 3R3MDGGV
NRS4010T 4R7MDGGV
NRS4010T 6R8MDGGV
NRS4010T 100MDGGV
NRS4010T 150MDGGV
NRS4010T 220MDGGV
●NRS4012
Shielded type
Part number
NRS4012T 1R0NDGGV
NRS4012T 2R2MDGJV
NRS4012T 3R3MDGJV
NRS4012T 4R7MDGJV
NRS4012T 6R8MDGJV
NRS4012T 100MDGJV
NRS4012T 150MDGJV
NRS4012T 220MDGJV
Nominal inductance
［μH½
1.0
2.2
3.3
4.7
6.8
10
15
22
Inductance tolerance
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Self-resonant
frequency
［MH½½（min.）
100
70
60
45
35
30
24
18
DC Resistance
［Ω½（±20％）
0.042
0.060
0.070
0.095
0.125
0.170
0.260
0.400
Rated current ※） ［½A½
Measuring
Saturation current
Temperature rise current
frequency［kHz½
Idc2
Idc1
2,800
2,200
100
1,650
1,900
100
1,400
1,700
100
1,200
1,500
100
900
1,300
100
800
1,100
100
650
750
100
500
620
100
Note
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
Nominal inductance
［μH½
1.0
2.2
3.3
4.7
6.8
10
15
22
Inductance tolerance
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Self-resonant
frequency
［MH½½（min.）
116
73
58
47
38
31
24
19
DC Resistance
［Ω½（±20％）
0.056
0.085
0.100
0.140
0.200
0.300
0.430
0.570
Rated current ※） ［½A½
Measuring
Saturation current
Temperature rise current
frequency［kHz½
Idc2
Idc1
2,000
1,900
100
1,200
1,500
100
1,100
1,400
100
950
1,200
100
800
1,000
100
620
750
100
540
600
100
450
500
100
Note
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
Nominal inductance
［μH½
1.0
1.5
2.2
3.3
4.7
6.8
10
22
Inductance tolerance
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
Self-resonant
frequency
［MH½½（min.）
100
87
64
49
40
36
28
20
DC Resistance
［Ω½（±20％）
0.030
0.038
0.058
0.078
0.120
0.160
0.220
0.520
Rated current ※） ［½A½
Measuring
Saturation current
Temperature rise current
frequency［kHz½
Idc2
Idc1
2,100
2,100
100
1,800
1,820
100
1,480
1,500
100
1,210
1,230
100
1,020
1,040
100
870
880
100
700
710
100
470
470
100
Note
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
Nominal inductance
［μH½
1.0
1.5
2.2
3.3
4.7
6.8
10
Inductance tolerance
±30％
±30％
±20％
±20％
±20％
±20％
±20％
Self-resonant
frequency
［MH½½（min.）
110
92
70
55
48
40
32
DC Resistance
［Ω½（±20％）
0.065
0.075
0.120
0.150
0.190
0.300
0.470
Rated current ※） ［½A½
Measuring
Saturation current
Temperature rise current
frequency［kHz½
Idc2
Idc1
2,500
1,600
100
2,100
1,400
100
1,800
1,100
100
1,600
1,000
100
1,250
850
100
950
650
100
800
550
100
Note
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
Nominal inductance
［μH½
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
Inductance tolerance
±30％
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Self-resonant
frequency
［MH½½（min.）
160
111
95
78
61
50
43
32
26
22
DC Resistance
［Ω½（±20％）
0.033
0.048
0.055
0.075
0.100
0.130
0.190
0.270
0.450
0.630
Rated current ※） ［½A½
Measuring
Saturation current
Temperature rise current
frequency［kHz½
Idc2
Idc1
2,600
1,900
100
2,200
1,710
100
1,700
1,600
100
1,500
1,370
100
1,200
1,210
100
1,000
1,060
100
850
890
100
730
720
100
530
570
100
500
500
100
Note
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
Nominal inductance
［μH½
1.2
1.5
2.2
3.3
4.7
6.8
10
15
22
47
Inductance tolerance
±30％
±30％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
±20％
Self-resonant
frequency
［MH½½（min.）
120
99
86
64
50
44
34
25
22
17
DC Resistance
［Ω½（±20％）
0.065
0.075
0.083
0.130
0.170
0.250
0.350
0.550
0.770
2.05
Rated current ※） ［½A½
Measuring
Saturation current
Temperature rise current
frequency［kHz½
Idc2
Idc1
1,700
1,480
100
1,440
1,370
100
1,300
1,300
100
1,000
1,030
100
850
900
100
700
745
100
600
620
100
450
480
100
380
410
100
250
285
100
Note
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
INDUCTORS POWER INDUCTORS
／
44
※
） The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※） The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※） The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
