SMT Common Mode Inductors
0.5A to 3.6A
Pick and place compatible
Rated voltage 250Vac
Low RFI toroid
Tape & Reel packaging available
Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C
Part
Number
1, 2
Inductance
(mH MIN)
13.2
6.0
1.8
0.9
0.6
Irated
(A)
0.50
1.00
2.50
1.50
3.60
DCR (MAX)
(mΩ)
850
450
80
60
50
Typical
SRF
(MHz)
0.3
0.5
2.2
2
4
Impedance
Curve
5
4
3
2
1
Size
Code
LCCI-37
LCCI-37
LCCI-50
LCCI-37
LCCI-50
Weight
(Grams)
2.4
2.4
5.2
2.5
5.3
Quantity
In Tube
30
30
30
30
30
PE-53914NL
PE-53913NL
PE-53912NL
PE-53911NL
PE-53910NL
Notes:
1. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the
part number (i.e. PE-53914L becomes PE-53914LT). Pulse complies to industry
standard tape and reel specification EIA481.
2. The “NL” suffix indicates an RoHS-compliant part number. Non-NL suffixed
parts are not necessarily RoHS compliant, but are electrically and mechanically
equivalent to NL versions. If a part number does not have the “NL”
suffix, but an RoHS compliant versions is required, please contact
Pulse for availability.
3. The temperature of the component (ambient plus temperature rise)
must be within the stated operating temperature range.
Mechanicals
PE-XXXXNL
1
4
Schematics
2
3
1:1 ±2%
Typical Impedance Curves
7K
Impedance
(Ω)
6K
5K
4K
3K
2K
1K
0
0
0.01
0.1
5
4
3
2
1
1
10
100
Frequency (MHz)
Size
LCCI-37
LCCI-50
A
.560/14,22
.670/17,02
B
.645/16,38
.770/19,56
C
.350/8,89
.390/9,90
D
.520/13,21
.650/16,51
E
.340/8,64
.445/11,30
F
.530/13,46
.660/16,76
1
power.pulseelectronics.com
SPM2007 (01/18)
http://www.power.pulseelectronics.com/contact
SMT Common Mode Inductors
0.5A to 3.6A
Application
These transformers have been designed for use at
the interface between line driver and receiver and
the interconnecting medium in Digital Audio Data
Transmission Systems according to AES 3-199X or
IEC 958. In such systems, two channels of periodically
sampled and uniformly quantized audio signals are
transmit on a single shielded twisted pair.
The electrical parameters of the interface are based on
those of CCITT V.II or balanced voltage digital circuits
which allow signal transmission up to a few hundred
meters. The isolation transformers are essential in
improving the balance of the transmitter and the receiver
circuitry, and reducing common mode noise and EMI.
These transformers are recommended for use with the
Cirrus Logic CS8401, CS8402, CS8403 and CS8404
“Digital Audio Interface Transmit Device. The schematic
below represents an implementation of transmit and
receive circuits using isolation transformers at both ends.
Equalization in the receiver may permit to increase the
length of the interconnecting cable.
Applicable Documents
AES 3-1985 (ANSI S4.40-1985), AES 3-199XDraft, IEC 958,
CP-340, EBU 3250
Application Chart
For More Information
Pulse Worldwide
Headquarters
15255 Innovation Drive Ste 100
San Diego, CA 92128
U.S.A.
Pulse Europe
Pulse Electronics GmbH
Am Rottland 12
58540 Meinerzhagen
Germany
Pulse China Headquarters
Pulse Electronics (ShenZhen) CO., LTD
D708, Shenzhen Academy of
Aerospace Technology,
The 10th Keji South Road,
Nanshan District, Shenzhen, P.R.
China 518057
Tel: 86 755 33966678
Fax: 86 755 33966700
Pulse North China
Room 2704/2705
Super Ocean Finance Ctr.
2067 Yan An Road West
Shanghai 200336
China
Tel: 86 21 62787060
Fax: 86 2162786973
Pulse South Asia
3 Fraser Street
0428 DUO Tower
Singapore 189352
Pulse North Asia
1F, No.111
Xiyuan Road
Zhongli District
Taoyuan City 32057
Taiwan (R.O.C)
Tel: 886 3 4356768
Fax: 886 3 4356820
Tel: 858 674 8100
Fax: 858 674 8262
Tel: 49 2354 777 100
Fax: 49 2354 777 168
Tel: 65 6287 8998
Fax: 65 6280 0080
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may
be trademarks or registered trademarks of their respective owners. © Copyright, 2017. Pulse Electronics, Inc. All rights reserved.
2
power.pulseelectronics.com
SPM2007 (01/18)
http://www.power.pulseelectronics.com/contact
综合技术交流
