Micro-D Coaxial/Power - .050" Contact Spacing
MDM C/P
MDM Coaxial
The MDM Metal Shell Connectors have been
tooled in several coaxial layouts and offer the
versatility of combining coaxial and signal lines
in the same connector. Any modifications to
these layouts or new requirements, please con-
sult the factory. Standard coax is RG178 white.
MDM Power
The same insulator that is used with coaxial contacts is
available with power contacts. This offers the versatility
of combining power and signal lines in the same connec-
tor.
MDM Coaxial/Power
Power and coaxial contacts can be interchanged as
desired. Power contacts are rated at 13 amps, 24V rms,
AWG #16 stranded.
For MIL-DTL-83513 ordering information see pages 16 and 17
RoHS COMPLIANCE
SERIES
MDM: (Size 9-100) Liquid Crystal Polymer (LCP)
MDM: (Combo Layout) Diallyl Phthalate (DAP)
SERIES
CONTACT ARRANGEMENTS
R
MDM -
51
P
H
001
P
- XXX
CONTACT TYPE
CONTACT ARRANGEMENTS
TERMINATION TYPE
9-15-21-25-31-37-51-100 (standard)
16C5, 10C10, 7C2, 24C4 (coaxial)
TERMINATION CODE
16P5, 10P10, 7P2, 24P4 (power)
or combination of
HARDWARE
coax and power
SHELL FINISH MOD CODES
CONTACT TYPE
P - Pin
S - Socket
F - Float mount
B - No hardware standard
TERMINATION TYPE
.091 (2.31) dia. hole for sizes 9-51;
H - Harness-insulated wire.
.120 (3.05) dia. hole for size 100.
L - Solid-uninsulated wire.
A - .125 (3.18) dia. mounting holes for sizes 9-51;
S - Solder pot to accept #26 AWG MAX.
.166 (4.22) dia. hole for size 100.
harness wire. (Not available with power
B1 - .1475 (3.75) dia. hole for size 100
contact arrangements.)
(Per MIL-DTL-83513)
}
(L) 1 - 1/2" uninsulated solid #25
AWG gold plated copper.
(L) 2 - 1" uninsulated solid #25 AWG
gold plated copper.
SHELL FINISH MOD CODES
No Number - (Standard cadmium/yellow
chromate over nickel
A174 - Electroless nickel
A172 - Gold over nickel
A141 - Irridite/alodine
A30 - Black anodize
HARDWARE
M - Military specification hardware, see
page 11 for military hardware codes.
P - Jackpost
K - Jackscrew-standard profile
L - Jackscrew-low profile
7C2/7P2
1.185 (30.10) MAX.
308 (7.82)
MAX
.965 ± .005
(24.51 ± 0.13)
+
+
TERMINATION CODE*
(H) 001 - 18",7/34 strand,#26 AWG,
MIL-W-16878/4, Type E Teflon, yellow.
(H) 003 - 18", 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
color coded to MIL-STD-681 System I.
*See pages D-98 to D-102 for additional Termination codes.
.186 (4.92) MAX.
1.185 (30.10) MAX.
.965 ± .005
(24.51 ± 0.13)
.308 (7.82) MAX.
+
+
.199 (5.05) MAX.
.416 (10.57)
MAX.
.100
(2.54)
MAX.
.429 (10.90)
MAX.
.100
(2.54)
MAX.
D
.091 ± .003
DIA.
(2.31 ± 0.08)
Plug
.800
(20.32)
MAX.
.091 ± .003 DIA.
(2.31 ± 0.08)
Receptacle
.800
(20.32)
MAX.
Microminiature
24C4/24P4
1.435 (36.45) MAX.
1.215 ± .005
(30.86 ± 0.13)
.351 (8.92)
MAX.
.186 (4.92)
MAX.
1.435 (36.45) MAX.
1.215 ± .005
(30.86 ± 0.13)
+
.416 (10.51)
MAX.
.100
(2.54)
MAX.
1.050
(26.67)
MAX.
.351 (8.92)
MAX.
.199 (5.05)
MAX.
+
+
+
.429 (10.90)
MAX.
.100
(2.54)
MAX.
.091 ± .003
DIA.
(2.31 ± 0.08)
Plug
.091 ± .003
DIA.
(2.31 ± 0.08)
Receptacle
1.050
(26.67)
MAX.
Power Contacts
Coaxial Contacts
BACK POTTING
REQUIRED
.350 (8.89)
MAX.
Plug
Receptacle
Plug
Receptacle
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
D-24
www.ittcannon.com
模拟与混合信号
