RP73D2H267RATG,RP73D2H267RATG pdf中文资料,RP73D2H267RATG引脚图,RP73D2H267RATG电路-Datasheet-电子工程世界

文档预览

SMD High Power Precision Resistors

Type RP73 Series

Key Features

High precision -

tolerances down to

0.05%

Low TCR - down to 5ppm/°C

Stable high frequency

performance

Operating temperature

-55°C to +155°C

Increased power rating -

up to 1.0W

Up to 200V DC operating

voltage

Range of packaging options

Terminal finish -

electroplated 100% matte Sn

Applications

Communications

Instrumentation

Industrial Controls

Medical

The RP73 resistor series is a stable thin film chip resistor range offering increased power

dissipation, higher temperature capabilities and increased working voltages compared to the

standard RN73 series. The resistor is produced by sputtering a metal film onto high grade

alumina and protecting with three complete printed layers. Values are normally offered in E96

and E24 series. The RP73 resistor has accurate and uniform physical dimensions to reduce

placement problems.

Characteristics - Electrical

0402

Rated Power @ 70°C:

0.063W

4R7

332K

10 15 2550

C D F G

Max:

5K0 15K 100K 5K0 15K

Tolerance (%):

Code Letter:

Selection Series:

Temp. Coefficient (ppm/°C):

Code Letter:

Limiting Element Voltage:

Max. Overload Voltage:

Operating Temp. Range:

Climatic Category (°C):

Insulation Resistance Dry Min:

Stability:

10 15 25 50

C D F G

0.05

25V

50V

-55 to +155°C

55/125/55

1000MΩ

0.5%

E24 & E96

25 50

F G

10 15 25 50

C D F G

70K 255K 5K0

15K 255K 15K

0.5 / 1

D/F

Resistance Range (Ohms) Min:

49R9 49R9 49R9 49R9 49R9 49R9 10R 49R9 49R9 10R 24R9

0.1

0603

0.1W

24R9 4R7 4R7 24R9 4R7 4R7

15K 332K 1M0 15K 332K 1M0

0.1

E24 & E96

10 15 25 50

C D F G

75V

150V

-55 to +155°C

55/125/55

1000MΩ

0.5%

1015 25 50

CD F G

0.5 / 1

D/F

0.05

0805

Rated Power @ 70°C:

Resistance Range (Ohms) Min:

24R9

Max:

30K

Tolerance (%):

Code letter:

Selection Series:

Temp. Coefficient (ppm/°C):

Code Letter:

Limiting Element Voltage:

Max. Overload Voltage:

Operating Temp. Range:

Climatic Category (°C):

Insulation Resistance Dry Min:

Stability:

10 15 25 50

C D F G

0.05

4R7

511K

0.125W

24R9 4R7

0.1

E24 & E96

10 15 25 50

D F G

150V

300V

-55 to +155°C

55/125/55

1000MΩ

0.5%

25 50

F G

4R7

24R9 4R7 4R7 1R0

30K 511K 1M0 1M0

0.5 / 1

D/F

24R9

50K

30K 511K 1M0

1206

0.25W

4R7

1M0

0.05 / 0.1 / 0.5 / 1

A/B/D/F

E24 & E96

200V

400V

-55 to +155°C

55/125/55

1000MΩ

0.5%

1773272 CIS BI 06/2011

Dimensions are in millimeters

and inches unless otherwise

specified. Values in brackets

are standard equivalents.

Dimensions are shown for

reference purposes only.

Specifications subject

to change.

For email, phone or live chat, go to:

te.com/help

SMD High Power Precision Resistors

Type RP73 Series

1210

Rated Power @ 70°C:

Resistance Range (Ohms) Min:

Max:

Tolerance (%):

Code Letter:

Selection Series:

Temp. Coefficient (ppm/°C):

Code Letter:

Limiting Element Voltage:

Max. Overload Voltage:

Operating Temp. Range:

Climatic Category (°C):

Insulation Resistance Dry Min:

Stability:

24R9

50K

0.3W

4R7

1M0

A/B/D/F

E24 & E96

200V

400V

-55 to +155°C

55/125/55

1000MΩ

0.5%

24R9

50K

2010

0.3W

4R7

1M0

0.05 / 0.1 / 0.5 / 1

A/B/D/F

E24 & E96

200V

400V

-55 to +155°C

55/125/55

1000MΩ

0.5%

4R7

100R

0.1

200V

400V

-55 to +155°C

55/125/55

1000MΩ

0.5%

2512

1R0

100R

0.5 / 1

D/F

E24 & E96

0.05 / 0.1 / 0.5 / 1

Characteristics - Environmental

Item

Temperature Coefficient

of Resistance (TCR):

Short Time Overload:

Insulation Resistance:

Endurance:

Damp Heat with Load:

Bending Strength:

Solderability:

Resistance to Soldering Heat:

Dielectric Withstand Voltage:

Thermal Shock:

Low Temperature Operation:

Reference Standards: MIL-STD-202, JIS-C 5201-1

Storage Temperature: 25±3°C; Humidity < 80%RH

ΔR ±0.05%

Requirement

Tol. ≤ 0.05%

Tol. > 0.05%

As per TCRs specified in value range table on page 1

ΔR ±0.05%

ΔR ±0.2%

ΔR ±0.2% for high power rating

>1000MΩ

ΔR ±0.05%

ΔR ±0.2%

>7kΩ ΔR ±0.5%

ΔR ±0.5% for high power rating

ΔR ±0.05%

ΔR ±0.3%

ΔR ±0.5% for high power rating

ΔR ±0.05%

By Type

ΔR ±0.25%

ΔR ±0.05%

ΔR ±0.2%

ΔR ±0.5% for high power rating

ΔR ±0.2%

95% min. coverage

Test Method

+25/-55/+25/+125/+25°C

RCWV* 2.5 or max. overload

voltage for 5 seconds

Apply 100VDC for 1 minute

70 ±2°C, max. working voltage

for 1000hrs with 1.5hrs

“ON” and 0.5 hrs “OFF”

40 ±2°C, 90 - 95% R.H. max. working voltage

hrs with 1.5hrs “ON” and 0.5hrs “OFF”

Bending amplitude 3mm for 10 seconds

245 ±5°C for 3 seconds

260 ±5°C for 10 seconds

Max. overload voltage for 1 minute

-55°C to +150°C, 100 cycles

1 hour, -65°C, followed by 45 minutes of RCWV

Power Derating Curve

100

Rated Load (%)

-55

-40

-20

60 70 80

100

120

140 155

Ambient Temperature (°C)

For resistors operated in ambient temperatures above 70°C, power rating must be derated in accordance with this curve.

1773272 CIS BI 06/2011

Dimensions are in millimeters

and inches unless otherwise

specified. Values in brackets

are standard equivalents.

Dimensions are shown for

reference purposes only.

Specifications subject

to change.

For email, phone or live chat, go to:

te.com/help

SMD High Power Precision Resistors

Type RP73 Series

Dimensions

1. Alumina Substrate

2. Bottom Electrode (Ag)

3. Top Electrode (Ag-Pd)

4. Edge Electrode (NiCr)

5. Barrier Layer (Ni)

6. External Electrode (Sn)

7. Resistor Layer (NiCr)

8. Overcoat (Epoxy)

9. Marking

Part Number

RP73 1E (0402)

RP73 1J (0603)

RP73 2A (0805)

RP73 2B (1206)

RP73 2E (1210)

RP73 2H (2010)

RP73 3A (2512)

1.00 ±0.05

1.55 ±0.10

2.00 ±0.15

3.05 ±0.15

3.10 ±0.15

4.90 ±0.15

6.30 ±0.15

0.50 ±0.05

0.80 ±0.10

1.25 ±0.15

1.55 ±0.15

2.40 ±0.15

3.10 ±0.15

0.30 ±0.05

0.45 ±0.10

0.55 ±0.10

0.20 ±0.10

0.30 ±0.20

0.42 ±0.20

0.40 ±0.20

0.60 ±0.30

0.20 ±0.10

0.30 ±0.20

0.40 ±0.25

0.35 ±0.25

0.55 ±0.25

0.50 ±0.25

Weight (g) 1000 pieces

0.54

1.83

4.71

9.02

10.00

23.61

38.08

Marking Codes - Case Sizes 0805 to 2512

IEC 4 Digit Marking

Resistance:

Marking Code:

100Ω

1000

2.2KΩ

2201

10KΩ

1002

49.9KΩ

4992

100KΩ

1003

Case Sizes 0603

E24 3 Digit Marking - Example: 101=100Ω 102=1KΩ

E24

E96 3 Digit Marking - Examples: 14C=13K7Ω, 13C=13K3Ω, 68B=4K99Ω, 68X=49.9Ω

14C

0603 E96 Marking Code Table

Code

Multiplier

E96

100

102

105

107

110

113

115

118

121

124

127

130

133

137

140

143

147

150

154

158

162

165

169

174

Code

E96

178

182

187

191

196

200

205

210

215

221

226

232

237

243

249

255

261

267

274

280

287

294

301

309

Code

E96

316

324

332

340

348

357

365

374

383

392

402

412

422

432

442

453

464

475

487

499

511

523

536

549

Code

-1

-2

E96

562

576

590

604

619

634

649

665

681

698

715

732

750

768

787

806

825

845

866

887

909

931

953

976

-3

1773272 CIS BI 06/2011

Dimensions are in millimeters

and inches unless otherwise

specified. Values in brackets

are standard equivalents.

Dimensions are shown for

reference purposes only.

Specifications subject

to change.

For email, phone or live chat, go to:

te.com/help

SMD High Power Precision Resistors

Type RP73 Series

Recommend Land Pattern

Type

RP73 1E (0402)

RP73 1J (0603)

RP73 2A (0805)

RP73 2B (1206)

RP73 2E (1210)

RP73 2H (2010)

RP73 3A (2512)

0.5

0.8

1.0

2.0

3.6

4.9

0.5

1.0

1.15

1.4

1.6

0.60 ±0.2

0.90 ±0.2

1.35 ±0.2

1.70 ±0.2

2.50 ±0.2

3.10 ±0.2

Packaging Quantity & Reel Specifications

Type

RP73 1E (0402)

RP73 1J (0603)

RP73 2A (0805)

RP73 2B (1206)

RP73 2E (1210)

RP73 2H (2010)

RP73 3A (2512)

øA

178.0 ±1.0

øB

60.0 +1.0

øC

13.5 ±0.7

9.5 ±1.0

13.5 ±1.0

11.5 ±1.0

15.5 ±1.0

Paper

Tape (EA)

*250 / 1000 / 5000

Embossed

Plastic Tape (EA)

1000 / 4000

* 250 piece packs supplied in sealed bags of cut tape length

1773272 CIS BI 06/2011

Dimensions are in millimeters

and inches unless otherwise

specified. Values in brackets

are standard equivalents.

Dimensions are shown for

reference purposes only.

Specifications subject

to change.

For email, phone or live chat, go to:

te.com/help

SMD High Power Precision Resistors

Type RP73 Series

Paper Tape Specification

Type

RP73 1E (0402)

RP73 1J (0603)

RP73 2A (0805)

RP73 2E (1210)

0.70 ±0.05

1.10 ±0.05

1.60 ±0.05

2.75 ±0.05

1.16 ±0.05

1.90 ±0.05

2.37 ±0.05

3.55 ±0.05

3.40 ±0.05

8.00 ±0.10

1.75 ±0.05

3.5 ±0.05

4.00 ±0.10

4.00 ±0.05

2.00 ±0.05

4.00 ±0.10

øD

0.40 ±0.03

0.60 ±0.03

0.75 ±0.05

2.00 ±0.05 1.55 ±0.05

2.00 ±0.05 1.60 ±0.10

RP73 2B (1206)

2.00 ±0.05

Embossed Plastic Tape Specifications

Type

RP73 2H (2010)

RP73 3A (2512)

2.85 ±0.10

3.40 ±0.10

5.45 ±0.10

6.65 ±0.10

12.0 ±0.10

1.75 ±0.10

5.5 ±0.05

4.00 ±0.05

4.00 ±0.10

2.00 ±0.05

øD

1.50 +0.10

1.00 ±0.20

How to Order

RP73

Common Part

Temp. Coefficient

Package Size

1E - 0402

A - ±5ppm/°C

RP73 -

SMD precision

high power,

high temperature

C - ±10ppm/°C

D - ±15ppm/°C

F - ±25ppm/°C

G - ±50ppm/°C

1J - 0603

2A - 0805

2B - 1206

2E - 1210

2H - 2010

3A - 2512

1K0

Resistor Value

100R

(100 Ohms)

1K0

(1000 Ohms)

10K

(10,000 Ohms)

100K

(100,000 Ohms)

1M0

(1,000,000 Ohms)

Tolerance

Packaging

TG - Cut Tape

(250 pcs)

A - ±0.05%

B - ±0.1%

D - ±0.5%

F - ±1%

TDF - Reel

(1000 pcs)

TD - Reel

(5000 pcs)

TDG - Reel

(250 pcs)

TE - Reel

(4000 pcs)

2H & 3A only

TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.

Other logos, product and Company names mentioned herein may be trademarks of their respective owners.

While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other

representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein

at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili-

ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change

without notice. Consult TE for the latest dimensions and design specifications.