首页 > 器件类别 > 热门应用 > 无线/射频/通信

SKY77596-11

IC FRONT END MOD GSM/GPRS 28MCM

器件类别:热门应用    无线/射频/通信   

厂商名称:Skyworks(思佳讯)

厂商官网:http://www.skyworksinc.com

器件标准:

下载文档
器件参数
参数名称
属性值
功能
前端
频率
824MHz ~ 915MHz,1.71GHz ~ 1.91GHz
RF 类型
GSM,GPRS
文档预览
PRODUCT SUMMARY
SKY77596 Tx-Rx FEM for Quad-Band GSM / GPRS
with Two Rx Switch Ports and Dual-Band TD-SCDMA
Applications
Quad-band GSM and Dual-Band
TD-SCDMA cellular handsets
encompassing
-
Class 4 GSM850
/ 900
-
Class 1 DCS1800
/
PCS1900
-
Class 12 GPRS
multi-slot operation
-
2
low insertion loss
/
interchangeable Rx switch ports
-
TD-SCDMA Bands 34/39
Description
SKY77596
is a transmit and receive Front End Module (FEM) designed
in
a very low profile
(0.9 mm) and compact form factor for quad-band cellular handsets comprising GSM850/900,
DCS1800/PCS1900 operation and dual-band TD-SCDMA bands 34 and 39 operation
a
complete transmit VCO-to-Antenna and Antenna-to-receive SAW filter solution. The FEM also
supports Class 12 General Packet Radio Service (GPRS) multi-slot operation.
The module consists of a GSM850/900 PA and DCS1800/PCS1900/TD-SCDMA PA block,
impedance-matching circuitry for 50
input and output impedances, Tx harmonic filtering, a
high linearity/low
insertion
loss switch, and a CMOS Power Amplifier Control (PAC) block. A
custom silicon integrated circuit contains decoder circuitry to control the RF switch while
providing a low current, external control interface.
Fabricated in GaAs, the Heterojunction Bipolar Transistor (HBT) PA blocks support the
GSM850/900 bands and DCS1800/PCS1900 bands and TD-SCDMA bands 34/39. Both PA
blocks share common power supply pads to distribute current. The output of the PA block and
the outputs to the
two
receive pads
connect
to the antenna pad through a high-linearity
antenna switch. The Rx ports feature a 0 volts DC offset level which eliminates the need for
external blocking capacitors. The GaAs die, switch die, CMOS controller die, and passive
components are mounted on a multi-layer laminate substrate and the entire assembly is
encapsulated with plastic overmold.
RF input and output ports of the
SKY77596
are internally matched to a 50
load to reduce the
number of external components on the phone board. Extremely low leakage current of the FEM
maximizes handset standby time. Control of transmit and receive RF signal flows, and band
selection are performed by four external control pads (see Figure 1
on
overleaf). Mode of
operation, Tx
vs.
Rx, and Band (GSM850, GSM900, DCS1800, PCS1900, and Bands
34/39)
are
controlled
with the four logic inputs: Mode, TxEN,
BS1,
and
BS2.
Proper timing of the TxEN
input and the
VRAMP
input ensures high isolation between the antenna and Tx-VCO while the
VCO is being tuned prior to the transmit burst.
The integrated power amplifier control (PAC) function provides envelope amplitude control
while reducing sensitivity to input drive, temperature, power supply, and process variation.
Output power variation into mismatch
is
minimized with
Skyworks’
Finger-Based Integrated
Power Amplifier Control (FB-iPAC)
control circuit.
Features
Small, low profile package
-
6 mm x 6 mm x
0.9
mm
-
28-pad
configuration
Low input power range
0
dBm to 6 dBm
High efficiency
Tx-VCO-to-antenna and antenna-
to-Rx-SAW
filter RF interface
Tx harmonics below
–38
dBm
Current limiting for over-voltage
protection and extended battery
life
Input/Output matched internally to
50
High impedance control inputs:
20 µA,
maximum
Power control circuitry built-in for
improved TRP variation
Skyworks
Solutions, Inc. • Phone [849]
376-3000
• Fax [849]
376-3100
• sales@skyworksinc.com • www.skyworksinc.com
202849A
• Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice. • May 3,
2013
1
Ordering Information
Product Name
SKY77596
Tx-Rx Front-End Module
Order Number
SKY77596
Evaluation Board Part Number
© 2013,
Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, “Breakthrough Simplicity,” DCR, Helios, HIP3, Innovation to Go, Intera, iPAC, LIPA, Polar Loop, and System Smart are trademarks or registered trademarks of
Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional
information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.
查看更多>
热门器件
热门资源推荐
器件捷径:
L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ
需要登录后才可以下载。
登录取消